• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.3
• /
• pp.391-398
• /
• 2011

This study is to develop highly efficient coagulation system(HECS) that runs treatment with a short retention time to cover the overflow in the rain, which coagulation, mixing and settling are contacted in a single reactor and to estimate the applicability. Setting up 100ton/day-size pilot scale plant, the results of continuous operation in case of runoff, maintaining 20 minute-retention time at optimum chemical injection condition(Alum 100mg/L, Polymer 1.0mg/L) shows the highest removal efficiency(Turbidity 93.1%, TCODcr 80.6%, BOD 81.8%, SS 92.5%, TN 72.3% and T-P 87.3%). It was estimated that the large amount of cost for separate sewage system and the size of area for system instruction can be reduced if the HECS is applied for CSOs treatment because the HECS is so compact and quickly. When we see the results, HECS from this study could be able to treat the pollutant quickly within a short retention time only with coagulant and polymer, which could show high applicability.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.352-358
• /
• 1986

An extensive experimental survey on the retention behaviors of phenols in the binary solvent system such as methanol-water, acetonitrile-water and tetrahydrofuran-water as well as the ternary solvent system such as methanol-acetonitrile-water and methanol-tetrahydrofuran-water is presented. A linear equation, which describes the capacity factor as a function of the solvent composition in the mobile phase and is able to predict the retention behaviors of phenols, was obtained. The iso-eluotropic lines for the binary and ternary solvent system are based on the equal strength of the methanol-water solvent which shows an optimum separation of the phenols used. The specific effect of each solute in the binary solvent system appeared to be larger than those in the ternary system.

• Geomechanics and Engineering
• /
• v.33 no.2
• /
• pp.141-154
• /
• 2023

This study investigated the effect of water retention characteristics between aged and fresh Municipal Solid Waste (MSW) on the stability of the landfill. A series of transient numerical modeling for the slope of an MSW landfill was performed considering the variation of water retention characteristics due to leachate circulation. Four different scenarios were considered in this analysis depending on how to obtain hydraulic conductivity and the aging degree of materials. Unsaturated hydraulic properties of the MSW used for the modeling were evaluated through modified hanging column tests. Different water retention properties and various landfill conditions, such as subgrade stiffness, leachate injection frequency, and gas and leachate collection system, were considered to investigate the pore water distribution and slope stability. The stability analyses related to the factor of safety showed that unsaturated properties under those varied conditions significantly impacted the slope stability, where the factor of safety decreased, ranging between 9.4 and 22%. The aged materials resulted in a higher factor of safety than fresh materials; however, after 1000 days, the factor of safety decreased by around 10.6% due to pore pressure buildup. The analysis results indicated that using fresh materials yielded higher factor of safety values. The landfill subgrade was found to have a significant impact on the factor of safety, which resulted in an average of 34% lower factor of safety in soft subgrades. The results also revealed that a failed leachate collection system (e.g., clogging) could result in landfill failure (factor of safety < 1) after around 298 days, while the leachate recirculation frequency has no critical impact on stability. In addition, the accumulation of gas pressure within the waste body resulted in factor of safety reductions as high as 24%. It is essential to consider factors related to the unsaturated hydraulic properties in designing a landfill to prevent landfill instability.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.656-663
• /
• 2010

In order to improve the consumer acceptance of fragrant yellow hybrids of $Phalaenopsis$ ($Phal.$), crosses between yellow hybrid varieties were made and the obtained hybrids were investigated for horticultural characteristics as well as difference in fragrance patterns. Cross combination of $Phal.$ Brother lawrence and $Phal.$ Brother saragold yielded good seedling population of 500 plants. Segregation was noticed in color density, spot and stripe patterns on yellow color base of petal and also in fragrance. Six lines with multi-branch on flower stalk and strong fragrance flower were finally selected. Volatile fragrance components were compared among $Phal.$ Brother lawrence, $Phal.$ Brother saragold and their hybrids by GC/SAW electronic nose. In the derivative pattern of chromatogram and polar derivative pattern of fragrance, similar dominant peaks appeared on retention time 7-9 s and some hybrid lines had two strong peaks on retention time 20-25 s, respectively. Also in polar frequency pattern of fragrance obtained by $VaporPrint^{TM}$ image analysis among parent flowers and hybrids, an identical strong peak near 8 s of retention time was shown. This single fragrance component is considered a key element of fragrance in $Phal.$ Brother lawrence, $Phal.$ Brother saragold and their hybrids. This peak could be used as a marker for the breeding of fragrance in $Phalaenopsis$.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.05a
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)

• Women's Health Nursing
• /
• v.25 no.3
• /
• pp.329-344
• /
• 2019

Purpose: This study aimed to identify utilization of the work-family support policy (WFSP) and factors affecting retention intention among Korean female military officers. Methods: This cross-sectional survey recruited 103 married female officers from the Korean Army, Navy, and Air force with preschool-aged children through convenience and snowball sampling. Via online surveys from June to November, 2018, the participants self-reported retention intention, work-family conflict, job satisfaction, and utilization of the WFSP. The data were analyzed using descriptive statistics, independent t-tests, one-way analysis of variance, Pearson's correlation coefficient, and multiple linear regression. Results: Retention intention ($22.29{\pm}5.98$) was reported at the mid-level, lower than scores reported in the literature for female workers. Work-family conflict ($32.51{\pm}5.29$) and job satisfaction ($63.10{\pm}7.45$) were above the midpoint levels. Use of maternity leave (100.0%) and parental leave (92.2%) was high, especially compared to the rates of child-care day off (20.4%) and parenting time (20.4%). 'Noticeable increases in childcare services within the army' (22.8%) was reported as the supportive measure needed the most by female military officers. Job satisfaction (${\beta}=.43$, $p{\leq}.001$), the use of parenting time (${\beta}=-0.29$, p=.002), living type (${\beta}=-.18$, p=.043), and service type (${\beta}=-.16$, p=.035) significantly influenced retention intention. Conclusions: The findings highlight the priority areas of importance within the WFSP and suggest that a family-friendly culture can improve female officers' retention intention. Accordingly, policy changes at the Ministry of National Defense improving the system to enhance a family-friendly culture in the military is expected to strengthen the retention intention of female officers and contribute to excellence in the military workforce.

• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.709-720
• /
• 2009

Field observation and numerical experiments were conducted to understand the impact of water retention pavement on the surface heat budget and on the regional circulation. The numerical model applied in this study is the atmospheric dynamic model Local Circulation Model (LCM) with two dimensional grid system, and a field observation was carried out under the clear sky and calm conditions of the weather on 19 July 2007. In the field observation, the maximum value of surface temperature on pavement covered with water retention material reached the $41.2^{\circ}C$ at 1430 LST and the values was lower for $16.1^{\circ}C$ than that of asphalt without the material. The Case BET03 assumed to be 0.3 for the surface evaporation efficiency was in good agreement with the observation and its sensible and latent heat fluxes were numerically estimated to be 229 and 227 $W/m^2$, respectively. Results of the numerical experiments demonstrated that the water retention pavement tends to induce the increase of latent heat flux associated with the lower surface temperature and mixing height during the daytime. Discontinuity of latent heat caused by the water retention pavement also tends to promote the development of mesoscale circulation called as land-land breeze or country breeze.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.386-389
• /
• 1999

Amphoteric polymers have brought to papermakers' attention gradually. In this paper, a series of amphoteric starches with different cationic and anionic degree of substitution (DS) are prepared. Better product has been selected and used under different condition. As retention and drainage aids, amphoteric starches were used in shorter fiber length, weak strength and poor drainage bleached AQ-Soda wheat straw pulp. In neutral and alkaline papermaking system, when amphoteric starches contain 0.024-0.026 anionic degree of substitution (DS), it is shown that the higher the cationic degree of substitution (DS) in amphoteric starches, the better the filler retention. The filler retention is improved 12.5%, 30.3%, and 35.1% and 32.5% respectively by adding 1% amphoteric starch LS-L2 -1 (0.034), LS-L2-2 (0.040), LS-L2-3 (0.047) and LS-L2-4 (0.052). But the strength of handsheets if affected a little. By adding 2% Al2 (SO4)3 and 1.5% LS-L2-3 at pH 7.5, filler retention can be improved from 38% to 80%, and breaking length of sheet only decreases 3.2%. As dry strengthening aids, amphoteric starches were used in eucalyptus APMP. Amphoteric starches are used in eucalyptus APMP. The amphoteric starch LS-L2-2 is better dry strength aid. Adding 1% LS-L2-2 can improve breaking length 24.5%, burst index 42.9%, tear index 38.8%, folding endurance and density of the handsheets.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.317-320
• /
• 2006

The optimum mobile phase condition for analysis of the six purine derivatives (caffeine, guanine, hypoxanthine, purine, theobromine, and theophylline) were determined by a HCI program. Reversed-phase HPLC system was used with the binary mobile phase, water and methanol. Three retention models (Snyder, Langmuir, and Binary polynomial) were considered to predict the retention factors. The elution profiles were calculated by the plate theory based on the binary polynomial retention model. From the final calculated results, the binary polynomial retention model showed the best agreements between the calculated and experimental data. In the isocratic mode, the optimum mobile phase composition of water/methanol is 93/7(v/v). However, we used step-gradient mode to decrease the run-time ($1^{st}$ mobile phase : water/methanol = 93/7 (v/v), gradient time : 5 min, $2^{nd}$ mobile phase : water/methanol = 75/25 (v/v)). The experimental and simulated profiles of above the two conditions show a good agreement.

• Research in Community and Public Health Nursing
• /
• v.33 no.3
• /
• pp.269-278
• /
• 2022

Purpose: This study analyzed the retention factors of Korean community health practitioners who sustained over 20 years based on a multi-dimensional framework. This study suggests global implications for nurses working in rural or remote areas, even during a worldwide pandemic. Methods: The participants were 16 Korean community health practitioners who worked in rural or remote locations for over 20 years. This study identified nurses' key retention factors contributing to long service in rural and remote areas. This is a qualitative study based on the narrative method and analysis was conducted using grounded theory. A semi-structured questionnaire was conducted based on the following: the life flow of the participants' first experience, episodes during the work experience, and reflections on the past 20 years. Results: First, personal 'financial needs' and 'callings' were motivation-related causal conditions. The adaptation of environment-work-community was the contextual condition leading to intervening conditions, building coping strategies by encountering a lifetime crisis. The consequences of 'transition' and 'maturation' naturally occurred with chronological changes. The unique factors were related to the 'external changes' in the Korean primary health system, which improved the participants' social status and welfare. Conclusion: Considering multi-dimensional retention factors was critical, including chronological (i.e., historical changes) and external factors (i.e., healthcare systems), to be supportive synchronously for rural nurses. Without this, the individuals working in the rural areas could be victimized by insecurity and self-commitment. Furthermore, considering the global pandemic, the retention of nurses is crucial to prevent the severity of isolation in rural and remote areas.