• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.05a
• /
• pp.1-1
• /
• 2000

The results of the modification of metal materials treated by high temperature pulst:d plasma fluxes (HTlPPF) with a specific power of incident flux changing in the $(3...100)10^5{]\;}W/cm^2$ range and a pulse duration lying from 15 to $50{\;}\mu\textrm{s}$ have been presented. The results of HTPPF action were studied on the stainless steels of 18Cr-l0Ni, 16Cr- 15Ni, 13Cr-2Mo types; on the structural carbon steels of (13...35)Cr, St. 3, St. 20, St. 45 types; on the tool steels of U8, 65G, ShHI5 types, and others; on nickel and high nickel alloy of 20Cr-45Ni type; on zirconium- and vanadium-base alloys and other materials. The microstructure and properties (mechanical, tribological, erosion, and other properties) of modified materials and surface alloying of metals exposed to HTPPF action have been investigated. It was found that the modification of materials by HTPPF resulted in a simultaneous increase of several properties of the treated articles: microhardness of the surface and layers of 40...60 $\mu\textrm{m}$ in depth, tribological characteristics (friction coefficient, wear resistance), mechanical properties ({\sigma_y}, {\;}{\sigma_{0.2}}.{\;}{\sigma_r}) on retention of the initial plasticity ($\delta$), corrosion resistance, radistanation erosion under ion irradiation, and others. The determining factor of the changes observed is the structural-phase modification of the near-surface layers, in particular, the formation of the fine cellular structure in the near-surface layers at a depth of $20{\;}{\mu\textrm{m}}$ with dimension of cells changing in the range from 0.1 to $1., 5{\;}\mu\textrm{m}$, depending on the kind of material, its preliminary treatment, and the parameters of plasma fluxes. The remits obtained have shown the possibility of purposeful surface alloying of metals exposed to HTPPF action over a depth up to 20...45 $\mu\textrm{m}$ and the concentration of alloying element (Ni, Cr, V) up to 20 wt.%. Possible industrial brunches for using the treatment have been also considered, as well as some results on modifying the serial industrial articles by HTPPF.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.130-135
• /
• 2023

Plasma-resistant ceramic (PRC) is a material used to prevent internal damage in plasma processing equipment for semiconductors and displays. The challenge is to suppress particles falling off from damaged surfaces and increase retention time in order to improve productivity and introduce the latest miniaturization process. Here, we confirmed the effect of suppressing plasma deterioration and reducing the etch rate through surface treatment of existing PRC with an initial illumination level of 200 nm. In particular, quartz glass showed a decrease in etch rate of up to 10%. Furthermore, it is believed that micro-scale secondary particles formed on the microstructure of each material grow as crystals during the fluoridation process. This is a factor that can act as a killer defect when dropped, and is an essential consideration when analyzing plasma resistance. The plasma etching suppression effect of the initial illumination is thought to be due to partial over etching at the dihedral angle of the material due to the sputtering of re-emission of Ar+-based cations. This means that plasma damage due to densification can also be interpreted in existing PRC studies. The research results are significant in that they present surface treatment conditions that can be directly applied to existing PRC for mass production and a new perspective to analyze plasma resistance in addition to simple etching rates.

• Journal of the Korean Chemical Society
• /
• v.63 no.4
• /
• pp.246-252
• /
• 2019

In the system of GC-OTC/FID (Gas chromatography-Open Tubular Column/Flame Ionization Detector), DMSO (Dimethyl sulfide) solvent was used to separate the polar solvents (Alcohols). In this system DMSO was eluted later than the separated polar solvents. At this system to calculate chromatographic factors [adjusted retention time ($t_R^{\prime}=t_R-t_O$), capacity factor{$k^{\prime}=(t_R-t_O)/t_O$} and separation factor {${\alpha}=(t_{R2}-t_O)/(t_{R1}-t_O)$}], dead time($t_O$) is necessary, but the method to calculate it has not been reported yet. Therefore, we have tried to develop $t_O$. To calculate $t_O$, we conversed DMSO retention time (DMSO $t_R$) to logarithm ($f(x)={\log}\;t_{R(DMSO)}{\rightarrow}t_O$, $t_O={\log}$ 9.551=0.980). To confirm the optimization of the developed method, we compared with $CH_4\;t_R$ and ${\ln}\;t_{R(DMSO)}$. Both of the values calculated by $CH_4\;t_R$ and ${\ln}\;t_{R(DMSO)}$ were not suitable in the calculation k' and ${\alpha}$. The developed method in this study{${\log}\;t_{R(DMSO)}$} has satisfied both of the values k' criteria (1${\alpha}(1<{\alpha}<2)$. The developed calculation method in this study was easy and convenient, therefore it can be expected to be applied to these similar systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.295-303
• /
• 2016

The purposes of this study are to describe the process for the instrument construction and the development of scales on rating college students' adaptability and to analyze the technical qualities of the test. The primary goal of this study is to inform students and institutions what is needed to college student's adjustment process into university and college life. The scales are tested by specialty group and statistical methods, and finally composed of 142 items, which measures 8 scales, the academic integration, the social integration into college, career identity, emotional stability, learning condition's stability, relationship with professors, satisfaction degree of educational service, satisfaction degree of college education. This study analyzed 1,959 students' responses from 4 colleges and universities. This study confirms that the scales which this study developed show high concurrent evidence with the college student's adaptability inventory for Korean university and college students based on various development process, specially rapid great change of college. The result of factor analysis shows the evidence based on internal structures of the scales. The Cronbach's ${\alpha}$ of the subscales is .965, from 742 to .937. The prediction model to determine the possibility of dropout by 7 scales is statistically significant in .05, except learning condition's stability. According to CFA Model, RMSEA= .08~.09. dependence factor variance are explained by this study's CFA model. In conclusion, this study confirms that the scales which this study developed are valid and reliable instrument for Korean university and college students to predict their adaptability to college.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.6
• /
• pp.456-463
• /
• 2011

The present study examined the effects of Korean white ginseng (WG, Panax ginseng C. A. Meyer) on the learning and memory function and the neural activity in rats with trimethyltin (TMT)-induced memory deficits. The rats were administered with saline or WG (WG 100 or 300 mg/kg, p.o.) daily for 21 days. The cognitive improving efficacy of WG on the amnesic rats, which was induced by TMT, was investigated by assessing the Morris water maze test and by performing immunohistochemistries on choline acetyltransferase (ChAT), acetylcholinesterase (AchE), cAMP responsive element binding protein (CREB) and brain derived neurotrophic factor (BDNF). The rats treated with TMT injection (control group) showed impaired learning and memory of the tasks, but the rats treated with TMT injection and WG administration produced significant improvement of the escape latency to find the platform in the Morris water maze at the 2nd and 4th days compared to that of the control group. In the retention test, the WG 100 and WG 300 groups showed significantly increased crossing number around the platform compared to that of the control group (p < 0.001). Consistently with the behavioral data, result of immunohistochemistry analysis showed that WG 100 mg/kg significantly alleviated the loss of BDNF-ir neurons in the hippocampus compared to that of the control group (p < 0.01). Also, treatment with WG has a trend to be increased the cholinergic neurons in the hippocampal CA1 and CA3 areas as compared to that of the control group. These results suggest that WG may be useful for improving the cognitive function via regulation of neurotrophic activity.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1113-1122
• /
• 2009

In order to find the way to solve the problem of sewage sludge discharge into the ocean, the sludge solubilization by ultrasonic and the improvement methods of wastewater treatment process were studied. In the membrane bioreactor the sludge retention time was stepwise increased from 5.1 day to 442 days where the biomass average concentration has been increased from $c_B$=3.4 $gTSSL^{-1}$ to $c_B$=14.5 $gTSSL^{-1}$ respectively. At the same time, the biomass yield coefficients were reduced from 0.5-0.7 at SRT=5.1 day to 0.005-0.007 at SRT=442 days which means the reduction of sludge production. Oxygen mass transfer coefficients and ${\alpha}$-factor were investigated with changing stirrer speed to find the relation between the high biomass concentration and aeration efficiency in the propeller loop reactor. As a result of sludge solubilization, the solubilization of sludge by ultrasound was increased with increasing energy input and it led to improved anaerobic digestion rate with more biogas production than that of nonsolubilized sewage sludge.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.9
• /
• pp.1213-1220
• /
• 2010

This experiment evaluated the effects of dietary lysine restriction and energy density on growth performance, nutrient digestibility and meat quality of finishing pigs. A $2{\times}2$ factorial arrangement of treatments was utilized in a randomized complete block (RCB) design, and factor 1 was lysine restriction and factor 2 was energy density. The control diet was formulated to contain 3.265 Mcal of ME/kg, 0.75% lysine in the early-finishing phase and 3.265 Mcal of ME/kg, 0.60% lysine in the late-finishing phase and other nutrients met or exceeded NRC (1998) standards. Compared to the control diet (CON), lysine levels of experimental diets were restricted to 15% (treatment EL, EEL) or 30% (treatment ELL, EELL), whereas energy level of experimental diets was increased by 0.100 or 0.200 Mcal of ME/kg. A total of 100 crossbred pigs ([Yorkshire${\times}$Landrace]${\times}$Duroc), with average initial body weight of $58.47{\pm}1.42\;kg$, were allotted to 5 dietary treatments based on sex and body weight. Each treatment had 5 replicates with 4 pigs (two barrows and two gilts) per pen. ADG, ADFI and feed efficiency were calculated in an 8-week growth trial. In the late finishing period (5-8 weeks), pigs fed ELL or EELL diets had decreased ADG and feed efficiency (p<0.01), however, when the EEL diet was provided, a similar growth performance was observed compared to those fed the CON diet during the whole experimental period (p>0.05). In a metabolic trial, 15 pigs were used to evaluate the effect of dietary lysine restriction and energy density on nutrient digestibility. The digestibility of dry matter, crude fat and crude ash was not improved by restricting dietary lysine or energy density. However, crude protein digestibility was decreased (p<0.05) as dietary lysine was restricted. When dietary lysine was restricted, fecal nitrogen was increased whereas nitrogen retention was decreased. BUN concentration was affected by dietary lysine restriction; treatments ELL and EELL had higher BUN values than other treatments (p<0.01). Carcass characteristics and meat quality were measured when average body weight of pigs reached $107.83{\pm}1.50\;kg$. Treatment ELL had higher last rib backfat depth (p<0.05) than treatment CON, but ELL and EEL did not differ significantly. The ELL and EEL treatments had higher (p<0.05) subjective marbling score than treatment CON. Treatment EEL showed higher longissimus fat content than treatment EL and CON (p<0.01). The results indicated that finishing pigs fed a diet with 15% lysine restriction and 3.465 Mcal of ME/kg energy density had no detrimental effects on growth performance and N utilization, and could achieve substantial increases in marbling and longissimus fat content of pork.

• Journal of Distribution Science
• /
• v.15 no.11
• /
• pp.83-93
• /
• 2017

Purpose - The study aims to analyze the VMD(Visual Merchandising) perception factors in recent sporting goods store and clarify the effect of each VMD perception factors on brand image, satisfaction, and customer revisit intention. The VMD perception factors play an important role in attracting and actually inducing sales to the visiting customers. It has investigated the effect of VMD perception on customer satisfaction and revisit intention. It is expected that the company's marketing strategy with VMD will be differentiated and competitive in sports item stores, brand image enhancement, customer retention, and acquisition. Research design, data, and methodology - In order to verify the hypotheses of this study, a total of 380 questionnaires had been distributed. 360 respondents were used in the final analysis excluding 20 respondents' incomplete answers. The SPSS 18.0 program was used and the data analysis was conducted for the demographic characteristics and distribution behavior. Principal Components Analysis was used for the common factor extraction for validity analysis, and factor analysis was conducted to verify such as validity in brand image or brand attitude. As for Multiple regression analysis, was performed to verify and in the research model, and in and , the mediation was defined through the Sobel Test in order to verify the brand image mediating effects on VMD, store satisfaction, and revisit inquiry of sports store. Results - Qualitative research shows that VMD sub-variables such as aesthetic, fitness, and functional convenience influence store satisfaction and revisit intention. As a result of analyzing the mediating effect of the brand image, the more VMD is strengthened, the more brand image is improved and store satisfaction is also increased. Conclusions - VMD enhancement requires a VMD strategy aligned with the company's management policies and objectives, a visual directing and consistent concept that delivers a strong message to customers. The customer actual purchasing behavior is a combination of various factors such as sports item stores' interior design, display, advertisement promotion like POP(Point of Purchase), salespersons and their service quality, so that the VMD image and the brand image must be consistent and a unique strategic plan is required.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.3
• /
• pp.438-443
• /
• 2000

Ectopic eruption should be understood as a change in the course of the normal eruption path of a dental bud at any moment its origin. An example of this alteration is the dental transposition, a rare and more specific dental anomaly that may be defined as a change of position between two teeth. This case shows ectopic eruption of transposed mandibular lateral incisor beneath primary first molar at the first transitional period of the mixed dentition The crown of the lateral incisor has tipped distally, compelling root resorption and exfoliation of the adjacent primary cuspid and primary first molar. The reason for such eruption is not clearly understood, but it may involve; (1)trauma history, (2)prolonged retention of the deciduous teeth, (3)premature exfoliation of the deciduous teeth, and (4)genetic factor. Treatment is divided into interceptive and definitive treatment. Ectopically erupting mandibular incisor tends to become transposed with the adjacent cuspid and thus seems to warrant early orthodontic intervention. Early treatment may obviate later extraction or transposition of the incisor and canine in the permanent dentition. Timing is an important factor to be considered regarding in the correction of the lateral incisor transposition. This case advocates treatment with an active orthodontic therapy at the early stage of the mixed dentiton, before the eruption of the permanent cuspid.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.681-685
• /
• 2008

Chiral separation of racemic mandelic acid was achieved on a Kromasil KR100-5CHI-TBB column. Some chromatographic parameters (resolution, number of theoretical plates, capacity factor) are calculated under different separation conditions such as changes of mobile phase compositions (hexane/t-BME = 85/15 - 10/90) as well as formic acid concentrations for adjusting pH (0.1, 0.5, 1.0 v/v%). Flow rate versus number of theoretical plates was compared to evaluate column efficiency. To determine the adsorption isotherms, PIM (Pulse Input Method) was carried out. At the concentrations of racemic mandelic acid between 0.1 and 0.3 mg/ml, L- and D-mandelic acids have the same retention times of 8.8 and 9.4 min respectively. Mandelic acid isotherms show a linear form under the concentrations of 0.3 mg/ml with eluent (hexane/t-BME = 75/25). As the concentrations of mandelic acids increase, nonlinear Langmuir isotherms were observed as $C_{S,L}=3.358C_{M,L}/(1+0.0897C_{M,L})$ for L-mandelic acid and, $C_{S,D}=3.692C_{M,D}/(1+0.1457C_{M,D})$ for D-mandelic acid.