• Bulletin of the Korean Mathematical Society
• /
• v.37 no.2
• /
• pp.361-376
• /
• 2000

Our purpose is to seek that the reachable set of the semilinear system $\frac{d}{dt}x(t){\;}={\;}Ax(t){\;}+{\;}f(t,x(t)){\;}+{\;}Bu(t)$ is equivalent to that of its corresponding to linear system (the case where f=0).Under the assumption that the system of generalized eigenspaces of A is complete, we will show that the reachable set corresponding to the linear system is independent of t in case A generates $C_0-semigroup$. An illustrative example for retarded system with time delay is given in the last section.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.755-764
• /
• 2016

Pressure retarded osmosis (PRO) processes can be implemented on a number of water types, using different technologies and achieving various power outcomes. In this study, Sewage facility effluent was used for feed solution of PRO and synthetic NaCl water for draw solution. This study was conducted to investigate effect of water quality of pretreatment on power density and flux decline in PRO process. The results show that organic and particulate foulants have to be removed for more stable operation. Flourescence technique with EEM enables to investigate the chemical properties of aquatic organic matter by extracting spectral information. Humic/fulvic matters and soluble microbial by-products were analyzed as the most affecting factors on the PRO performance. As a result of analyzing the whole system based on the energy consumption of the unit process, specific energy consumption(SEC) of the applicable technology for PRO pre-treatment should be about $0.2kWh/m^3$ or less.

• Journal of the Korean Ceramic Society
• /
• v.27 no.4
• /
• pp.560-566
• /
• 1990

The early hydration characteristics according to the C3A polymorphism and the presence of gypsum, in order to establish the hydration mechanism of the system C3S-C3A, have been studied. The hydration rate of C3A was changed according to the its crystal structure and influenced the hydration of C3S. That is, the hydration rate of C3S was accelerated in case of orthorhombic-C3A, but that was slightly retarded in case of melt-C3A than that of cubic-C3A. In the system C3S-C3A-gypsum, the retardation phenomenon of the reaction of monosulfate formation was observed in case of both orthorhombic and melt-C3A.

• Journal of the Korean Ceramic Society
• /
• v.36 no.11
• /
• pp.1243-1251
• /
• 1999

Densification behavior and microstructural evolution during the liquid-phase sintering of alumina-anorhite system were investigated as a function of MgO addition. When MgO component was added in either alumina or anorthite glass powder the aspect ratio of alumina grains decreased and concurrently the are of flat interface which was formed as a result of contact solid alumina gains rather increased. Consequently addition of MgO component in the Al2O3-amorthite system brought about suppression of the rearrangement of solid grains during the liquid phase sintering and then densification of specimens was also retarded.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.2
• /
• pp.202-207
• /
• 1995

The effects of lipoxygenase, linoleic acid, tocopherol and pH on the co-oxidation of $\beta$-carotene in the aqueous system were studied. It showed that the co-oxidation of $\beta$-carotene was noticeable at both pH 7.4 and 9.0. As the concentraitons of linoleic acid and $\beta$-carotene increased, the rate of oxidation of $\beta$-carotene tended to be increased. However, $\alpha$- and $\delta$-tocopherol retarded the co-oxidation of $\beta$-carotene. As the concentrations of tocopherols increased, $\beta$-carotene was more stabilized, generally. But low concentration of $\alpha$-tocopherol(10-4M) acted more effective antioxidant than high concentration of it(10-3M) at pH 7.4. The antioxidant effect of tocopherol greatly depended on pH ; it was outstanding at pH 7.4.

• Korean Journal of Optics and Photonics
• /
• v.3 no.3
• /
• pp.155-160
• /
• 1992

1)iscussed in this paper are the effects of phase modulation on the line spread functions (LSF) and MTFs of ;I binocular objective system. The binocular objective lens is made in Korea. It has rotationally symmetric aberrations. The LSFs and MTFs are measured experimentally. The phase modulation is carried out by applying phase retardation n on the aperture. The area where the phase is not retarded presents a double annular type. The OTF curves of phase modulated aperture are compared with that of unmodulated aperture. The comparison shows that there is the aberration compensation effect in aberration loaded system. Therefore the performance of many optical system can be improved without any loss of light energy by properly modulating the phase on the aperture.

• Archives of Pharmacal Research
• /
• v.16 no.1
• /
• pp.50-56
• /
• 1993

The microencapsulation of sodium naproxen with Eudragit. RS was studied by coacrtvation/phase separation process using Span 80 in mineral oil/acetone system. Various factors which affect the mciroencapsulation, e.g., stirring speed, and surfactant concentraction, Eudagit RS concentration and loading drug amounts were examined. For the evaluation of the prepared microcapsules, release rate, particle size distribution and surface appearance as well as in vivo test were carried out. The addition of n-hexane and freezing of microcapsules accelerated the hardening of microcapsules. The optimum concentration of Span 80 ti prepare the smallest microcapsules was the same value with the CMC of Span 80 in solvent system. When 1.5% (w/w) Span 80 was used, the smallest microcapsules were formed $(30.02\pm5.05\mu$ in diameter) belonging to the powder category showing smooth, round and uniform surface. The release of sodium naproxen was retarded by microencapsulation with Eudragit RS. The Eudragit RS microcapsules showed significantly increased AUC and MRT and deceased Cl/F in rabbits.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.4
• /
• pp.299-307
• /
• 2013

Introduction of PLM in domestic shipyards is being retarded as ship PLM has yet to firm up return of investment and process integration. To implement a ship PLM system, it is required to share ship CAD model data in various design and manufacturing environments. Lightweight CAD models provide a promising solution for sharing CAD models in the product life cycle, which can expedite implementation of ship PLM in domestic shipyards in the near future. Compared to proprietary CAD models, it is easy for lightweight CAD models to be interfaced with various application systems and be connected to manufacturing information. In this paper, the reason why lightweight CAD models are necessary to implement a ship PLM system is addressed and current implementation results are introduced.

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1213-1220
• /
• 1997

Effect of particle size of alumina and amount of talc on tape casting and densification behaviors of alumina-talc system were investigated. The pseudoplastic behaviors of slurries increased with increase in amount of talc addition and decrease in alumina particle size. In case of using coarse alumina powder, densification of specimens were accelerated with increase of sintering temperature and amount of talc addition. On the contrary, fine alumina powder retarded of rearrangement of alumina particle during liquid phase sintering due to premature densification of alumina matrix region before formation of liquid phase and then densification of specimens were suppressed with increase of sintering temperature and amount of talc addition.

• Journal of Nutrition and Health
• /
• v.30 no.3
• /
• pp.244-251
• /
• 1997

The effects of Artemisia princeps var orientalis(mugwort), Circium japonicum var ussuriense (Unggungqui) on cadiovascular system in hyperlipidemic rats were investgated. Thirty rats devided into 5 experimental groups, were fed with the diet contained 1% chlesterol, 0.25% sodium cholate, 10% coconut oil and 5% lard by the same method of previous paper1). Contractile and relaxation responses in the isolated artria and thoracic aortae were measured and the morphological changes of the aortic endotherium from the rats were inspected. The responses of the right atrial to isoproterenol were significantly lower value in Ungungqui powder diet group(UP) and mugwort powder diet group(MP) than the control. The contraction force by injectin of phenylephrine and calcium in isolated thoracic aortae was significantly low value in the UP and the MP groups compaired to the control. The relaxation rate by acetylcholine in isolated thoracic aortae represented significantly higher value in UP than control. The morphological changes of endothelial cell suface was smallest in UP and the damage of endothelium by retarded in MP. Although Ungungqui and mugwort extract diet groups(UE, ME) were advanced, those were less than control.