• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.51-55
• /
• 1997

This study is devote to developing navigation filter for detecting sensor failure in multi-sensor navigation system. In multi-sensor navigation system, Kalman filter is generally used to fuse data of each sensors. Sensor failure is fatal in case that the sensor is used as external measurement of Kalman filter therefore detection and recovery of sensor failure is one the important feature of navigation filter. Generally each sensors have its specific feature in measuring navigational information. Fuzzy theory is proposed to detect external sensor failure and provide valid external measurement to Kalman filter avoiding filter divergence and instability. This idea is applied to Autonomous Underwater Vehicle(AUV) which has two navigation sensor i. e self contained inertial sensor and acoustic external sensor. 2 dimensional simulation result shows acceptable failure detection and recovery

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.749-757
• /
• 2007

Recently, with increasing interested in improvement of operational reliability and the systematic maintenance activities, the RCM analysis has been applied and tried to lots of applicable industries. This study covers applying the probability of failure cause to FMEA, and proposes an analytical method for this. Also, the measures of quantitative classification for the result of failure cause probability are addressed. Based on the field data, this thesis presents an identification for causes and characteristics of failure, and reviews them periodically from the above methodologies. As using FMEA applied the probability of failure cause, we in the future can look forward to improvement of efficiency for failure diagnosis & inspection, and reliability.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.947-954
• /
• 2005

The purpose of this study is to develop failure pressure evaluation models, which are applicable to straight pipes and elbows containing an internally wall thinning defect induced by flow-accelerated-corrosion (FAC). In this study, thus, three dimensional finite element (FE) analyses are performed to investigate the dependences of failure pressure of internally wall thinned pipe on the defect shape, the pipe geometry, and the defect location and bend radius of elbow. Also, the existing failure pressure assessment models for externally wall thinned pipes are examined. Based on these, the new models for assessing failure pressure of piping components with an internally wall thinning defect are proposed. Comparison of failure pressure, predicted by proposed models, with FE analysis result shows good agreement regardless of pipe type, defect shape, and defect location and bend radius.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.363-366
• /
• 2008

It was accomplished that failure analysis not only failure numbers but also power system components every years. and these informations help power system operation considerably. power system equipment were occurred a break down by natural phenomenon and aging but it was not able to predict this failure number. But many papers and technical repots study for each equipment failure rate and reliability evaluation methods. so this paper show a failure number prediction whole power system component using Markov theory not each component failure probability. the result present a next month system failure number prediction.

• Structural Engineering and Mechanics
• /
• 제4권6호
• /
• pp.601-612
• /
• 1996

To simulate the large-scale failure evolution with current computational facilities, a simple approach, that catches the essential feature of failure mechanisms, must be available so that the routine use of failure analysis is feasible. Based on the previous research results, a simple analysis procedure is described in this paper for failure simulation. In this procedure, the evolution of localization is represented by a moving surface of discontinuity, and the transition between continuous and discontinuous failure modes are described via the moving jump forms of conservation laws. As a result, local plasticity and damage models, that are formulated based on thermodynamic restrictions, are still valid without invoking higher order terms, and simple integration schemes can be designed for the rate forms of constitutive models. To resolve localized large deformations and subsequent cracking, an efficient structural solution scheme is given for Static and dynamic problems.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.932-941
• /
• 2021

This paper suggests a fracture simulation method for SFR metallic fuel pin under accident condition. Two major failure mechanisms - creep damage and eutectic penetration - are implemented in the suggested method. To simulate damaged element, stress-reduction concept to reduce stiffness of the damaged element is applied. Using the proposed method, the failure size of cladding can be predicted in addition to the failure time and failure site. To verify the suggested method, Whole-pin furnace (WPF) test and TREAT-M test conducted at Argonne National Laboratory (ANL) are simulated. In all cases, predicted results and experimental results are overall in good agreement. Based on the simulation result, the effect of eutectic-penetration depth representing failure behavior on failure size is studied.

• 한국환경과학회지
• /
• 제17권11호
• /
• pp.1281-1293
• /
• 2008

This study aims at the estimation of dam failure time and dam failure scenario analysis of and applied to Yeoncheon Dam which was collapsed August 1st 1999, using HEC-HMS, DAMBRK-FLDWAV simulation model. As the result of the rainfall-runoff simulation, the lancet flood amount of the Yeoncheon Dam site was $10,324\;m^3/sec$ and the total outflow was $1,263.90\;million\;m^3$. For the dam failure time estimation, 13 scenarios were assumed including dam failure duration time and starting time, which reviewed to the runoff results. The simulation time was established with 30 minutes intervals between one o'clock to 4 o'clock in the morning on August 1, 1999 for the setup standard for each case of the dam failure time estimation, considering the arrival time of the flood, when the actually measured water level was sharply raising at Jeongok station area of the Yeoncheon Dam downstream, As results, dam failure arrival time could be estimated at 02:45 a.m., August 1st 1999 and duration time could be also 30 minutes. Those results and procedure could suggest how and when dam failure occurs and analyzes.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.15-23
• /
• 2005

For reliability assessment for machine tools, failure mode analyses by two viewpoints were studied in this paper. First, this study developed the reliability data analysis program, which searches f3r optimal failure distribution like failure rate or MTBF(Mean Time Between Failure) using failure data and reliability test data of mechanical parts in the web. Moreover, this data analysis program saves both failure data or reliability data and their failure rate or MTBF for database establishment. Second, this paper conducted failure mode analysis through such performance tests as circular movement test and vibration testing for machine tools when reliability data is not available. A developed web-based analysis program shows correlations between failure mode and performance test result and also accumulates all the data. These kinds of data analysis programs and stored data furnish valuable information for improving the reliability of mechanical system.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.355-361
• /
• 2017

Purpose: The purpose of this research is to establish the life test method for ceramic heater and identify the failure mechanisms. Methods: We do accelerated life test in the condition of thermal shock and failure analysis for failed samples. Conclusion: The main failure mechanisms of ceramic heater are identified as overstress failure mechanisms as results of failure analysis and the shape parameters of weibull distribution by accelerated life test are identified as 0.8, 1.2 and 0.4 each at $400^{\circ}C$, $600^{\circ}C$ and $900^{\circ}C$. At $900^{\circ}C$, the shape parameter 0.4 means that It is exactly initial failure caused that the stress exceeds the strength of ceramic heater highly and the shape parameters 0.8, 1.2 at $400^{\circ}C$, $600^{\circ}C$ means that the shape parameters are around 1.0 so that the main failure mechanism is overstress failure which is same result as failure analysis. It means that the appropriate life test method for ceramic heater is reliability qualification test method rather than accelerated life test.

• 한국산학기술학회논문지
• /
• 제21권2호
• /
• pp.366-372
• /
• 2020

육군에서 사용하는 로켓탄은 생산되고 나서 단 한 번의 임무수행으로 소모되는 원샷 무기체계로 높은 신뢰성을 요구한다. 원샷 무기체계인 로켓탄의 신뢰성 분석을 위해서는 이미 발생한 고장 자료를 활용하거나 아직 고장이 발생하지 않은 비고장 자료를 활용할 수 있다. 그러나 고장 자료만으로 실시할 경우 수명분포가 과소 추정될 수 있고, 비고장 자료를 모두 포함할 경우 과대 추정되어 실제 수명분포와 상당한 오차가 발생할 수 있으며, 이 수명에 대한 오차는 로켓탄의 조기폐기나 전수조사로 인한 비용을 증가시킬 수 있다. 육군은 이러한 문제 때문에 비고장 자료에서 샘플 수를 정하여 고장 자료와 함께 신뢰성 분석을 실시하고 있으나 실제 고장률을 예측하는데 한계가 있다. 본 연구는 이를 해결하기 위해 육군의 000다연장 로켓탄을 대상으로 비고장 자료를 비율별로 샘플링하여 수명분포의 오차가 최소화되는 비율을 찾는 샘플링 절차에 대해 새롭게 제안하고 이를 바탕으로 미래 고장률을 예측하였다. 제안한 비율별 샘플링 방법과 현재 사용하는 샘플링 방법의 비교를 통해 제안한 샘플링 방법이 미래 고장률을 더 정확하게 예측할 수 있음을 보였다.