• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.190-198
• /
• 2013

Ambers have been used mostly as beads, jewelry and ornaments from ancient times and excavated as a buried artifact. When excavated, they are severely weathered to be cracked, exfoliated and disintegrated. Monitoring of changes in composition of amber according to weathering is very important for diagnosing the condition of amber and applying conservation materials and techniques. In this study, we tried to find the components of amber by analyzing amber with pyrolysis/GC/MS. The changes in the composition of pyrolzates after artificial ageing for 60 days under heat and oxygen were also observed. Abietic acid was detected as a main component of fresh amber and monoterpene, alkene, aromatic hydrocarbon were detected as major pyrolyzates. Changes with artificial ageing was estimated by comparing the peak area ratio of 23 components, and it was found that abietic acid abruptly decreased in the presence of heat and oxygen together, revealing that oxygen is a key factor to the deterioration of amber. It was also tried to understand the weathered surface of original amber gemstone based on the result of this ageing experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2067-2072
• /
• 2016

Recently, due to the development of attack techniques that can circumvent existing information protection systems, continuous threats in a form unrecognized by the user have threatened information assets. Therefore, it is necessary to support the prompt responses to anticipated attempts of APT attacks, bypass access attacks, and encryption packet attacks, which the existing systems have difficulty defending against through a single response, and to continuously monitor information protection systems with a defense strategy based on Indicators of Attack (IOA). In this paper, I suggest a centralized intelligent information protection system to support the intelligent response to a violation by discerning important assets through prevention control in a performance impact assessment about information properties in order to block the attack routes of APT; establishing information control policies through weakness/risk analyses in order to remove the risks in advance; establishing detection control by restricting interior/exterior bypass networks to server access and monitoring encrypted communications; and lastly, performing related corrective control through backup/restoration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.206-215
• /
• 2007

Ad-Hoc network technology is a mobile internet technology of the future that will be used widely not only in Mobile Network but also in Wireless Personal Area Network (WPAN) and Ubiquitous Network For this to occur, distributed routing protocol design, loop prevention for link information reduction in overhead for control messages and route restoration algorithm must be improved or complemented. Security techniques that can guarantee safe com-munication between Ad-Hot nodes net also be provided. This study proposes and evaluates a new authentication mechanism for MANET. The mechanism segregates the roles of certification authority to keep with the dynamic mobility of nodes and handle rapid and random topological changes with minimal over-head. That is, this model is characterized by its high expandability that allows the network to perform authentication service without the influence of joining and leaving nodes. The efficiency and security of this concept was evaluated through simulation.

• Journal of the Korean Medical Association
• /
• v.61 no.12
• /
• pp.724-731
• /
• 2018

Our faces can express a remarkable range of subtle emotions and silent messages. Because the face is so essential for complex social interactions that are part of our everyday lives, aesthetic repair and restoration of function are an important tasks that we must not take lightly. Soft-tissue defects occur in trauma patients and require thorough evaluation, planning, and surgical treatment to achieve optimal functional and aesthetic outcomes, while minimizing the risk of complications. Recognizing the full nature of the injury and developing a logical treatment plan help determine whether there will be future aesthetic or functional deformities. Proper classification of the wound enables appropriate treatment, and helps predict the postoperative appearance and function. Comprehensive care of trauma patients requires a diverse breadth of skills, beginning with an initial evaluation, followed by resuscitation. Traditionally, facial defects have been managed with closure or grafting, and prosthetic obturators. Sometimes, however, large defects cannot be closed using simple methods. Such cases, which involve exposure of critical structures, bone, joint spaces, and neurovascular structures, requires more complex treatment. We reviewed and classified causes of significant trauma resulting in facial injuries that were reconstructed by microsurgical techniques without simple sutures or coverage with partial flaps. A local flap is a good choice for reconstruction, but large defects are hard to cover with a local flap alone. Early microsurgical reconstruction of a large facial defect is an excellent choice for aesthetic and functional outcomes.

• The Journal of the Korean dental association
• /
• v.57 no.3
• /
• pp.149-160
• /
• 2019

Atrophic alveolar ridge of maxillary anterior area is commonly observed after the extraction of teeth in patients with severely compromised periodontal disease, causing difficulties with implant placement. Successful esthetics and functional implant rehabilitation rely on sufficient bone volume, adequate bone contours, and ideal implant positioning and angulation. The present case report categorized the ridge augmentation techniques using guided bone regeneration (GBR) on the maxillary anterior site by Seibert classification. Case I patient presented for implant placement in the position of tooth #11. The alveolar ridge was considered a Seibert classification I ridge defect. Simultaneous implant placement and GBR were performed. Eight months after implantation, clinical and radiological examinations were performed. Case III patient presented with discomfort due to mobility of the upper maxillary anterior site. Due to severe destruction of alveolar bone, teeth #11 and #12 were extracted. After three months, the alveolar ridge was considered a Seibert classification III ridge defect. A GBR procedure was performed; implantation was performed 6 months later. Approximately 1-year after implantation, clinical and radiological examinations were performed. During the whole treatment period, healing was uneventful without membrane exposure, severe swelling, or infection in all cases. Radiographic and clinical examinations revealed that atrophic hard tissues and buccal bone contour were restored to the acceptable levels for implant placement and esthetic restoration. In conclusion, severely resorbed alveolar ridge of the maxillary anterior area can be reconstructed with ridge augmentation using the GBR procedure so that dental implants could be successfully placed.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.2
• /
• pp.120-127
• /
• 2019

PURPOSE. To determine wear amount of single molar crowns, made from four different restoratives, and opposing natural teeth through computerized fabrication techniques using 3D image alignment. MATERIALS AND METHODS. A total of 24 single crowns (N = 24 patients, age range: 18 - 50) were made from lithium disilicate (IPS E-max CAD), lithium silicate and zirconia based (Vita Suprinity CAD), resin matrix ceramic material (Cerasmart, GC), and dual matrix (Vita Enamic CAD) blocks. After digital impressions (Cerec 3D Bluecam, DentsplySirona), the crowns were designed and manufactured (Cerec 3, DentsplySirona). A dualcuring resin cement was used for cementation (Variolink Esthetic DC, Ivoclar). Then, measurement and recording of crowns and the opposing enamel surfaces with the intraoral scanner were made as well as at the third and sixth month follow-ups. All measurements were superimposed with a software (David-Laserscanner, V3.10.4). Volume loss due to wear was calculated from baseline to follow-up periods with Siemens Unigraphics NX 10 software. Statistical analysis was accomplished by Repeated Measures for ANOVA (SPSS 21) at = .05 significance level. RESULTS. After 6 months, insignificant differences of the glass matrix and resin matrix materials for restoration/enamel wear were observed (P>.05). While there were no significant differences between the glass matrix groups (P>.05), significant differences between the resin matrix group materials (P<.05) were obtained. Although Cerasmart and Enamic were both resin matrix based, they exhibited different wear characteristics. CONCLUSION. Glass matrix materials showed less wear both on their own and opposing enamel surfaces than resin matrix ceramic materials.

• Journal of Korean Foot and Ankle Society
• /
• v.24 no.4
• /
• pp.148-155
• /
• 2020

Purpose: Minor foot amputations are performed for recurrent or infected ulcers or osteomyelitis of the diabetic feet. Patients may require a large amount of bone resection for wound closure. On the other hand, this results in more foot dysfunction and a longer time to heal. The authors describe fillet flap coverage to avoid more massive resection in selected cases. This study shows the results of fillet flap coverage for the closure of diabetic foot minor amputation. Materials and Methods: This was a retrospective case series of patients who underwent forefoot and midfoot amputation and fillet flap for osteomyelitis or nonhealing ulcers between March 2013 to November 2017. In addition, the patient comorbidities, hospital days, complications, and duration to complete healing were evaluated. Results: Fourteen fillet flap procedures were performed on 12 patients. Of those, two had toe necrosis, nine had forefoot necrosis, and three had midfoot necrosis. Eleven forefoot amputations and three midfoot amputations were performed. Among forefoot necrosis after a fillet flap, three patients had revision surgery for partial necrosis of the flap, and two patients had an additional amputation. Two patients had additional amputations among those with midfoot necrosis. By the fillet flap, the amputation size was reduced as much as possible. The mean initial healing days, complete healing days, and hospital stay was 70.6 days, 129.0 days, and 60.0 days, respectively. Conclusion: The fillet flap facilitates restoration of the normal foot contour and allows salvage of the metatarsal or toe.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.4
• /
• pp.1-6
• /
• 2020

Recently, ex-situ remediation technologies has been emerging to clean up contaminated soils mainly because the in-situ techniques have limited applicability and technical difficulties in relatively small contaminated sites. Accordingly, implementation of off-site treatment and disposal have been continuously increased in soil remediation and restoration projects in Korea. However, in many cases, reclaimed soil is still not properly recycled or reused. Therefore, there is an urgent need to document the current status of soil management practices in soil remediation projects in the nation. This study presents a survey of soil contamination status and remedial approaches in Korea based on soil cleanup projects completed in 2015 - 2019, and proposes the possible options of the recycling or reusing the reclaimed soils under compliance with related regulations. The results of the soil survey showed soil contamination was most severe in gas stations, industrial facilities, and military areas. The major types of pollution were related to the petroleum-contaminated site (TPH and BTEX) with 77.0% occurrence in all the contaminated sites. The reclaimed soils were mostly reused as a ground filling-up soils in industrial facilities (60.0%) and warehouses (37.0%).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.4
• /
• pp.239-248
• /
• 2021

The paper reviews various classifications and surgical techniques for the treatment of temporomandibular joint ankylosis. PubMed, EBSCO, Web of Science, and Google Scholar were searched using a combination of keywords. Articles related to classification, resection-reconstruction of the temporomandibular joint, and management of airway obstruction were considered and categorized based on the objectives. Seventy-nine articles were selected, which included randomized clinical trials, non-randomized controlled cohort studies, and case series. Though several classifications exist, most classifications are centered on the radiographic extent of the ankylotic mass and do not include the clinical and functional parameters. Hence there is a need for a comprehensive staging system that takes into consideration the age of the patient, severity of the disease, clinical, functional, and radiographic findings. Staging the disease will help the clinician to adopt a holistic approach in treating these patients. Interpositional arthroplasty (IA) results in better maximal incisal opening compared with gap arthroplasty, with no significant difference in recurrent rates. Distraction osteogenesis (DO) is emerging as a popular technique for the restoration of symmetry and function as well as for relieving airway obstruction. IA, with a costochondral graft, is recommended in growing patients and may be combined with or preceded by DO in cases of severe airway obstruction. Alloplastic total joint replacement combined with fat grafts and simultaneous osteotomy procedures are gaining popularity. A custom-made total joint prosthesis using CAD/CAM can efficiently overcome the shortcomings of stock prostheses.

• Journal of Broadcast Engineering
• /
• v.27 no.2
• /
• pp.198-206
• /
• 2022

This paper proposes a method to solve problems that may occur when SPIHT(set partition in hierarchical trees) is used in a dedicated codec for compressing complex holograms with ultra-high resolution. The development of codecs for complex holograms can be largely divided into a method of creating dedicated compression methods and a method of using anchor codecs such as HEVC and JPEG2000 and adding post-processing techniques. In the case of creating a dedicated compression method, a separate conversion tool is required to analyze the spatial characteristics of complex holograms. Zero-tree-based algorithms in subband units such as EZW and SPIHT have a problem that when coding for high-resolution images, intact subband information is not properly transmitted during bitstream control. This paper proposes a method of dividing wavelet subbands to solve such a problem. By compressing each divided subbands, information throughout the subbands is kept uniform. The proposed method showed better restoration results than PSNR compared to the existing method.