• 천문학회보
• /
• 제37권2호
• /
• pp.211.1-211.1
• /
• 2012

The on-orbit test simulation for predicting the instrument directional responsivity was conducted by the Monte Carlo based integrated ray tracing (IRT) computation technique and analytic flux-to-signal conversion algorithms. For the on-orbit test simulation, the Sun model consists of the Lambertian scattering sphere and emitting spheroid rays, the Amon-Ra instrument is a two-channel including a broadband scanning radiometer (energy channel) and an imager with ${\pm}2^{\circ}$ FOV (visible channel). The solar radiation produced by the Sun model is directed to the instrument viewing port and traced through the dual channel optical train. The instrument model is rotated on its rotation axis and this gives a slow scan of the Sun model over the full field of view. The direction of the incident lights are fed with scanned images obtained from the visible channel instrument. The instrument responsivity was computed by the ratio of the incident radiation input to the instrument output. In the radiometric simulation, especially, measured BRDF of the 3D CPC was used for scattering effects on radiometry. With diamond turned 3D CPC inner surface, the anisotropic surface scattering model from the measured data was applied to ray tracing computation. The technical details of the on-orbit test simulation are presented together with field-of-view calibration plan.

• 전자공학회논문지
• /
• 제52권11호
• /
• pp.36-43
• /
• 2015

본 연구를 통해서 초점면 배열 이차원 마이크로볼로미터를 위한 픽셀 단위의 신호취득 회로를 연구하였다. 높은 응답도와 긴 적분시간을 갖는 픽셀 단위의 구조를 위해 이 단계 바이어스 전류 억제 방식을 갖는 전류 미러 입력회로를 제안하였다. 제안하는 회로는 $0.35-{\mu}m$ 2-poly 4-metal CMOS 공정을 이용하여 설계했고, 마이크로볼로미터의 배열 크기는 $320{\times}240$이며 픽셀 크기는 $50{\mu}m{\times}50{\mu}m$이다. 제안하는 이 단계 바이어스 전류 억제 방식은 넓은 보정 범위에서 충분히 작은 보정 오차를 보이며, 설계 파라미터를 조정하여 보정 범위와 보정 오차를 간단히 최적화할 수 있다. 제안하는 회로는 높은 응답도와 1 ms 이상의 긴 적분시간을 갖기 때문에 회로의 잡음등가온도차(NETD)를 26 mK까지 개선할 수 있고, 이는 기존회로의 잡음등가 온도차인 67 mK에 비해 매우 개선된 수치이다.

• Journal of information and communication convergence engineering
• /
• 제4권4호
• /
• pp.147-150
• /
• 2006

The thin film of PbTiO3 is fabricated at substrate temperature of 100-150$^{\circ}C$. The infrared spectrum of the ferroelectric thin film is measured as temperature of thermal treatment, 400 - 550$^{\circ}C$. According to infrared spectrum analysis, there are absorption bands at a nearby wave number of 1000 $\sim$ 400 cm-l and the thin film treated by temperature of 550$^{\circ}C$ has absorption bands of wave number 500 cm-l similar to infrared response property of PbTiO3 powder. The pyroelectric infrared detector is fabricated after deposition of Pt and PbTiO3 thin film on Si wafer by sputtering machine. The measured remnant polarization are 11.5-12.5$\muC/cm2$, breakdown electric field Ec is 100-120KV/cm, and voltage responsivity and detectivity is -280V/W, -108cm Hz/W.

• ETRI Journal
• /
• 제27권5호
• /
• pp.484-490
• /
• 2005

We fabricated 40 Gb/s front-end optical receivers using spot-size converter integrated waveguide photodiodes (SSC-WGPDs). The fabricated SSC-WGPD chips showed a high responsivity of approximately 0.8 A/W and a 3 dB bandwidth of approximately 40 GHz. A selective wet-etching method was first adopted to realize the required width and depth of a tapered waveguide. Two types of electrical pre-amplifier chips were used in our study. One has higher gain and the other has a broader bandwidth. The 3 dB bandwidths of the higher gain and broader bandwidth modules were about 32 and 42 GHz, respectively. Clear 40 Gb/s non-return-to-zero (NRZ) eye diagrams showed good system applicability of these modules.

• ETRI Journal
• /
• 제34권6호
• /
• pp.942-945
• /
• 2012

A high-speed traveling-wave photodetector (TWPD) with an InGaAs absorber is designed and realized. The bandwidth of the TWPD is measured using electro-optic sampling techniques. The bandwidth is 410 GHz, which shows that the RC limitation is overcome. While the TWPD shows a low responsivity of 0.06 A/W at 1,550 nm, this value can be improved through further optimization of the structure without a sacrifice in bandwidth.

• Applied Science and Convergence Technology
• /
• 제24권5호
• /
• pp.178-183
• /
• 2015

Optical, electrical and structural properties of VOx/ZnO/VOx thin film are studied. The VOx/ZnO/VOx multilayer is deposited by using a radio frequency (RF) sputtering system. The VOx/ZnO/VOx thin film shows the high temperature coefficient of resistance (TCR) of $-3.12%/^{\circ}C$ and the low sheet resistance of about 80 $k{\Omega}/sq$ at room temperature. The responsivity and detectivity of the bolometer are measured as a function of modulation frequency.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.780-783
• /
• 2004

The two-dimensional modeling of the non-stationary thermal state and voltage responsivity of the sensitive elements usually used in solid-state pyroelectric focal plane arrays are presented. Temperature distributions under periodical thermal excitation and the response of the thermal imaging device, which is composed of the pyroelectric sensitive elements mounted on a single silicon substrate, are numerically calculated. The sensitive element consists of a covering metal layer, infrared polymer absorber, front metal contact, sensitive pyroelectric element, the interconnecting column and the bulk silicon readout. The results of the numerical modeling show that the thermal crosstalk between sensitive elements to be critical especially at low frequency (f < 10Hz) of periodically modulated light. It is also shown that the use of our models gives the possibility to improve the design, operating regimes and sensitivity of the device.

• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.52-62
• /
• 1995

We developed a two-dimensional numerical simulator which can analyze the electrical as well as optical characteristics and evaluate the detection performances of self-signal processing infrared detectors. It solves the poisson equation and the electron, hole current continuity equations including the optical generation and recombination models. To speed up convergency rate. the Newton algorithm is used. Automatic triangular grid generator make it easy to simulate the devices with the various read-out geometries. This simulator can show the variation of spatial resolution which is caused by the transit velocity and transit time dispersion in bifurcate and horn geometries respectively. Also, we calculated the responsivity, noise, and detectivity in respect of the applied electric field and background field-of-view. The results obtained from simulation correspond to those of experiments, and it is verified that horn read-out geometry has the superior spatial resolution and detection performance to bifurcate geometry.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.605-608
• /
• 1998

In this paper, we have investigated the pyroelectric characteristics of the $20\mu\textrm{m}-thick$ $LiTaO_3$ single crystal with black coating by using the nondestructive dynamic method. The $LiTaO_3shows$ the maximum pyroelectric coefficient (${\gamma}$) of $1.56$\times$10-8C/\textrm{cm}^2K$ at 40Hz and the responsivity (Rv) is 488V/W at 2Hz. The noise equivalent power (NEP) is obtained as 3.95$\times$10-10W/√Hz at 40Hz. The detectivity (D*) is obtained divided by the sample area and estimated to be 5.6$\times$108cm√Hz/W at 40Hz. These results, shows that the $LiTaO_3$ single crystals are the best candidates to pyroelectric IR sensors.

• 아동학회지
• /
• 제28권1호
• /
• pp.115-128
• /
• 2007

Participants in this study to develop the Korean version of the Early Childhood Home Observation for Measurement of the Environment(EC-HOME) were 294 3- to 6- year-old children enrolled in a child care center and their parents. Results were that EC-HOME had sufficient internal reliability : Cronbach's ${\alpha}=.80$. Correlation of test-retest ranged from .76~.97. In item-analysis, 9 items with low 'corrected item-total correlation' were removed resulting in 30 items. Factor analysis confirmed 6 factors : 1) Learning Material, 2) Learning Stimulation, 3) Responsivity, 4) Physical Environment, 5) Language Stimulation, and 6) Variety of Materials. Analysis of the relation of children's home environment to their characteristic variances with parents and developmental functioning showed high internal consistency and convergent validity of the sub-scales.