• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.3
• /
• pp.378-382
• /
• 2006

Clarified orange juice was prepared using different clarification methods including centrifugation, enzyme treatment, ultrafiltration (UF), and combined treatment(CT). Effect of clarification methods as well as other quality parameters were investigated. Clarification was improved with increase in centrifugation speed and by lowering operating temperature. The optimum condition for centrifugation process was $5^{\circ}C$ and 10,000 rpm. UF and CT processes were very effective to produce clarified orange juice. The optimum condition of UF process was $45^{\circ}C$ and 150 kPa considering flux and turbidity CT did not significantly improve the clarification efficiency since most of the clarification was already achieved during UF process. $L^*$-values increased while $a^*$-values decreased significantly after clarification regardless of methods (p<0.05) Considering color, and recovering rate of vitamin C and soluble solids, UF process was superior than the other methods in producing clarified orange juice.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.4 s.44
• /
• pp.405-416
• /
• 1992

This study was performed to investigate correlation between total body weight loss and local sweat rate and to find out any possible method that can estimate total body weight loss judging from local sweat rate. Twelve adult females were kept at 44 $\pm1^{\circ}C$, 50 ${\pm}5\%$ R.H. (1) Physiological responses such as total body weight loss, local sweat rate, rectal temperature, skin temperature, blood pressure and pulse, (2) micro climate inside garment and (3) subjective sensation were examined. Two types of garment such as long-sleeves with long pants (Type I) and half·sleeves with short pants (Type II) were used to observe the effect of garment types on sweating response. Both clothing weight was equal (132$\pm$3 g/$m^{2}$). The results were as follows: 1. Regardless of the different types, total body weight loss was more interrelated with the sweat rate on forehead than any other parts of the body. Except the forehead, different parts of body with different types of garment influenced on body weight loss quite differently. 2. Total body weight loss was more interrelated with the weight gain of garment than the local sweat rate. 3. Under the environment of 44$\pm1^{\circ}C,\;50{\pm}5\%$R.H., body weight loss during 1 hour of subject clothed and silted was 275.2 g/hr and weight loss per body surface area was 178.9 g/$m^{2}/hr$ Garment types have no influences on total body weight loss. 4. Local sweat rate (mg/7.07 $cm^{2}/hr$) was 208.0,191.0, 133.0, 115.0,81 0, 75.1 and 66.3 on scruff, breast, forehead, forearm, thigh, upper arm, leg respectively No evidence has been found that garment types influenced on local sweat rate (p<0.1). 5. No interrelationships between rectal temperature and total body weight loss, local skin temperature and total body weight loss, and local skin temperature and local sweat rate were found. From this study, some possible method that we can estimate total body' weight loss judging from weight loss of garment. But considering the fact that clothing design factor, the physical characteristics of fabric and environmental factor such as humidity and wind velocity should be concerned in weight loss of garment, it should be studied further whether the total body weight loss can be estimated properly from the weight loss of garment. This experiment suggest that different parts of body with different types of garment can influence on body weight loss quite differently. Therefore, in order to get more precise results, more studies under the diversity of garment types should be done in the near future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.38-50
• /
• 2008

The site-specific seismic responses and corresponding seismic hazards are influenced mainly by the subsurface geologic and geotechnical dynamic characteristics. To estimate reliably the seismic responses in this study, a geotechnical information system (GTIS) within GIS framework was developed by introducing new concepts, which consist of the extended area containing the study area and the additional site visit for acquiring surface geo-knowledge data. The GIS-based GTIS was built for Gyeongju area, which has records of abundant historical seismic hazards reflecting the high potential of future earthquakes. At the study area, Gyeongju, intensive site investigations and pre-existing geotechnical data collections were performed and the site visits were additionally carried out for assessing geotechnical characteristics and shear wave velocity ($V_S$) representing dynamic property. Within the GTIS for Gyeongju area, the spatially distributed geotechnical layers and $V_S$ in the entire study area were reliably predicted from the site investigation data using the geostatistical kriging method. Based on the spatial geotechnical layers and $V_S$ predicted within the GTIS, a seismic zoning map on site period ($T_G$) from which the site-specific seismic responses according to the site effects can be estimated was created across the study area of Gyeongju. The spatial $T_G$ map at Gyeongju indicated seismic vulnerability of two- to five-storied buildings. In this study, the seismic zonation based on $T_G$ within the GIS-based GTIS was presented as regional efficient strategy for seismic hazard prediction and mitigation.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.109-112
• /
• 2001

An activated carbon paste electrode was modified with the N-Hydroxysuccinimide(NHS) layer and applied to determine the dopamine in the presence of an excess ascorbic acid using square-wave voltammetry. The electrochemical properties of the modified electrode were examined in the solution containing dopamine/ascorbic acid using cyclic voltammetry(CV): the separation between the oxidation peaks of dopamine and ascorbic acid was largely dependent on the pH of the sample solution and became maximum at pH 4.0. Hence, the square-wave voltammetric determination of dopamine was carried out in a pH 4.0, 100mM phosphate buffer saline(PBS) containing 140mM NaCl. The detection limit and response slop were improved from $1.0{\mu}M\;to\;5.0\times10^{-2}{\mu}M\;and\;from\;0.93{\mu}A/{\mu}M\;to\;6.1{\mu}A/{\mu}M$, respectively, upon modification of the electrode surface by NHS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.4
• /
• pp.264-269
• /
• 2016

The present study was conducted to establish the optimal fertilization type and method for no-tillage during the first year of No-tillage (NT) and Conventional-tillage (CT) practices for soybean, using different types of fertilizers. In this experiment, the culm length and stalk diameter showed a greater response to fertilization with surface irrigation than to conventional fertilization. The fastest flowering period (July 28) occurred using chemical fertilization applied via subsurface irrigation. Comparing maturation based on growth characteristics and flowering date revealed that fertilization with subsurface irrigation was more effective for the growth of crops than other methods. Regarding yield, there was no significant difference between livestock and chemical fertilizers in subsurface irrigation, but there were significant differences between these fertilizers when using conventional fertilization methods. Based on the results, livestock fertilizer with subsurface irrigation effectively enhanced crop quantity. Nitrogen absorption of plants using subsurface irrigation was more effective than that using conventional fertilization. Regarding phosphorus absorption of plants, chemical fertilizers showed higher absorption than did livestock fertilizers for both subsurface irrigation and conventional fertilization. Unlike nitrogen, phosphorus was highly absorbed using conventional fertilization. Absorption of phosphorus and potassium were similar but phosphorus was not absorbed using livestock fertilizers applied either using subsurface irrigation or with conventional fertilization.

• Journal of the Korean Society of Tobacco Science
• /
• v.7 no.1
• /
• pp.15-23
• /
• 1985

Growth response and evapotranspiration of tobacco as to each soil moisture condition treated with different height of ground water table such as 30cm, 100cm, 170cm, and 230cm were investigated. The results obtained were as follows; 1. Soil water potential in the rhizosphere (25cm depth from surface) treated with ground water table (G.W.T) of 230 cm was less than -6.5 bar at 60 days after transplanting. 2. Dry weight of leaves per plant was the highest in the pot treated with 100 cm G.W.T and was the lowest in the pot treated with 230 cm G.W.T.. Leaves/Stem ratio of dry weight was the lowest in the pot treated with 230 cm G.W.T. This would show that extension of leaves as compared with elongation of stem was suppressed. .3. In the roster stress condition of 230 cm G.W.T., extension of leaves was continued until the latter growth stage, Relative growth rate of leaf area per plant of the pot with 30 cm G.W.T. was the highest through all growth period after fixation of G.W.7., but owing to lower density of leaf, the dry weight of leaves per plant was less rather than that of the pot with 170 cm G.W.T. at 64 days after transplanting. 4. The highest evapotranspiration per plant per day was shown at the 45th day after transplanting in the pots with 30cm and 100cm G.W.T. and at 60 days in the pots with 170cm and 230cm G.W.T respectively. 5. In the soil moisture conditions with 30cm and 100cm G.W.T., evapotranspiration per plant per hour was much higher in the daytime that at night as well as in clear day than in rain-cloudy day owing to loner relative humidity , but in the water stress condition with 230 cm G.W.T., that was much lower. 6. Total evapotranspiration per plant during the whole growing period of 64 days was in order of 30cm > 100 cm > 170 cm > 230 cm G.W.T.. Total evapotranspiration for 34 days after fixation of G.W.T was much higher at night than in the daytime in case of water stress conditions i.e 170cm and 230cm G.W.T. but in normal condition of the pots with 30cm and 100cm G.W.T. that was much higher in the daytime than at night. 7. Leaf water potential of the 3rd and 6th leaf from top at 64 days after transplanting was in order of 100cm > 30 cm > 170cm > 230cm G.W.T. The reason why leaf water potential in the pot with 30cm was less than that in the pot with 100cm G.W.T. would be the abnormal turgidity with low density of cell substrates by the excess water absorption in the pot with 30cm G.W.T..

• Journal of Plant Biotechnology
• /
• v.43 no.1
• /
• pp.21-29
• /
• 2016

Remote Sensing (RS) is a technique to obtain necessary information in a non-contact and non-destructive method by using various sensors on the surface, water or atmospheric phenomena. These techniques combine elements such as sensors, and platform and information communication technology (ICT) for mounting the sensor. ICT has contributed significantly to the success of smart agriculture through quantification and measurement of environmental factors and information such as weather, crop and soil management to distribution and consumption stage, as well as the production stage by the cloud computer. Remote sensing techniques, including non-destructive non-contact bioimaging (remote imaging) is required to measure the plant function. In addition, bioimaging study in plant science is performed at the gene, cellular and individual plant level. Recently, bioimaging technology is considered the latest phenomics that identifies the relationship between the genotype and environment for distinguishing phenotypes. In this review, trends in remote sensing in plants, plants diagnostics and response to environment and status of plants phonemics research were presented.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.283-289
• /
• 2008

This study used response surface methodology (RSM) in an effort to optimize the hot water extraction conditions of dandelion leaves in order to increase antioxidant activity in the extract. A central composite design was applied to investigate the effects of independent variables, which included the ratio of solvent to sample ($X_1$), extraction temperature ($X_2$), and extraction time ($X_3$), on dependent variables of the extracts, including soluble solid ($Y_1$), total polyphenols ($Y_2$), total flavonoid ($Y_3$), 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging ability ($Y_4$), 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) radical scavenging ability ($Y_5$), and superoxide radical scavenging ability ($Y_6$). The estimated optimal conditions were as follows: $83.77{\pm}1.07^{\circ}C$ of the extraction temperature, $20.85{\pm}0.24 mL/g$ of solvent per sample, and $1.59{\pm}0.12$ hr of extraction time. At the optimal conditions, the predicted characteristic values were: a yield of 38.98%, a total polyphenol level of $74.28{\mu}g/mg$, a total flavonoid level of $74.00{\mu}g/mg$, a DPPH radical scavenging ability ($IC_{50}$) of 0.14 mg/mL, a ABTS radical scavenging ability ($IC_{50}$) of 3.24 mg/mL, and a superoxide radical scavenging ability ($IC_{50}$) of 2.49 mg/mL.

• Journal of Life Science
• /
• v.25 no.12
• /
• pp.1458-1469
• /
• 2015

Many organic solvent-tolerant bacteria have been isolated from all environments such as soil, waste-water, even deep sea after first isolation report of organic solvent-tolerant bacterium. Most organic solvent- tolerant isolates have been determined to be Gram-negative bacteria, because Gram-negative bacteria have inherent tolerance property toward hostile organic solvents more than Gram-positive bacteria. The mechanisms of organic solvent tolerance have been elucidated extensively using mainly organic solvent-tolerant Gram-negative bacteria. The solvent-tolerance mechanisms in Gram-positive bacteria can be found in comparatively recent research. Organic solvents exhibited different toxicity depending on the solvent, and the tolerance levels of organic solvent-tolerant bacteria toward organic solvents were also highly changeable among species and strains. Therefore, organic solvent-tolerant bacteria could coped with solvent toxicity and adapted to solvent stress through the multifactorial and multigenic adaptative strategies. They could be survived even in the hyper concentrations of organic solvents by mechanisms which include: changes in cell morphology and cell behaviour, cell surface modifications, cell membrane adaptations, solvent excretion pumps, chaperones and anti-oxidative response. The aim of this work is to review the representative solvent tolerant bacteria and the adaptative and tolerance strategies toward organic solvents in organic solvent-tolerant bacteria, and their potential industrial and environmental impact.

• Journal of Life Science
• /
• v.26 no.12
• /
• pp.1487-1497
• /
• 2016

Bacterial cell to cell communication strategies called quorum sensing (QS) using small diffusible signaling molecules (auto-inducers) govern the expression of various genes dependent on their population density manner. As a consequence of synthesis and response to the signaling molecules, individual planktonic cells synchronized group behaviors to control a diverse array of phenotypes such as maturation of biofilm, production of extra-polymeric substances (EPS), virulence, bioluminescence and antibiotic production. Many studies indicated that biofilm formations are associated with QS signaling molecules such as acyl-homoserine lactones (AHLs) mainly used by several Gram negative bacteria. The biofilm maturation causes undesirable biomass accumulation in various surface environments anywhere water is present called biofouling, which results in serious eco-technological problems. Numerous molecules that interfere the bacterial QS called quorum quenching (QQ), have been discovered from various microorganisms, and their functions and mechanisms associated with QS have also been elucidated. To resolve biofouling problems related to various industries, the novel approach based on QS interference has been emerged attenuating multi-drug resisting bacteria appearance and environmental toxicities, which may provide potential advantages over the conventional anti-biofouling approaches. Therefore this paper presents recent information related to bacterial quorum sensing system, quorum quenching enzymes that can control the QS signaling, and lastly discuss the anti-biofouling approaches using the quorum quenching.