• Korean Journal of Materials Research
• /
• v.20 no.4
• /
• pp.223-227
• /
• 2010

Recently, one-dimensional semiconducting nanomaterials have attracted considerable interest for their potential as building blocks for fabricating various nanodevices. Among these semiconducting nanomaterials,, $SnO_2$ nanostructures including nanowires, nanorods, nanobelts, and nanotubes were successfully synthesized and their electrochemical properties were evaluated. Although $SnO_2$ nanowires and nanobelts exhibit fascinating gas sensing characteristics, there are still significant difficulties in using them for device applications. The crucial problem is the alignment of the nanowires. Each nanowire should be attached on each die using arduous e-beam or photolithography, which is quite an undesirable process in terms of mass production in the current semiconductor industry. In this study, a simple process for making sensitive $SnO_2$ nanowire-based gas sensors by using a standard semiconducting fabrication process was studied. The nanowires were aligned in-situ during nanowire synthesis by thermal CVD process and a nanowire network structure between the electrodes was obtained. The $SnO_2$ nanowire network was floated upon the Si substrate by separating an Au catalyst between the electrodes. As the electric current is transported along the networks of the nanowires, not along the surface layer on the substrate, the gas sensitivities could be maximized in this networked and floated structure. By varying the nanowire density and the distance between the electrodes, several types of nanowire network were fabricated. The $NO_2$ gas sensitivity was 30~200 when the $NO_2$ concentration was 5~20ppm. The response time was ca. 30~110 sec.

• Korean Journal of Materials Research
• /
• v.23 no.9
• /
• pp.477-482
• /
• 2013

We investigated the detection properties of nitrogen monoxide (NO) gas using transparent p-type $CuAlO_2$ thin film gas sensors. The $CuAlO_2$ film was fabricated on an indium tin oxide (ITO)/glass substrate by pulsed laser deposition (PLD), and then the transparent p-type $CuAlO_2$ active layer was formed by annealing. Structural and optical characterizations revealed that the transparent p-type $CuAlO_2$ layer with a thickness of around 200 nm had a non-crystalline structure, showing a quite flat surface and a high transparency above 65 % in the range of visible light. From the NO gas sensing measurements, it was found that the transparent p-type $CuAlO_2$ thin film gas sensors exhibited the maximum sensitivity to NO gas in dry air at an operating temperature of $180^{\circ}C$. We also found that these $CuAlO_2$ thin film gas sensors showed reversible and reliable electrical resistance-response to NO gas in the operating temperature range. These results indicate that the transparent p-type semiconductor $CuAlO_2$ thin films are very promising for application as sensing materials for gas sensors, in particular, various types of transparent p-n junction gas sensors. Also, these transparent p-type semiconductor $CuAlO_2$ thin films could be combined with an n-type oxide semiconductor to fabricate p-n heterojunction oxide semiconductor gas sensors.

• Journal of Embryo Transfer
• /
• v.13 no.2
• /
• pp.179-190
• /
• 1998

Prolactin (PRL) surge in cycling rats at proestrous afternoon has previously been reported as an inducer of apoptotic cell death of luteal cells. This death-inducing action of PRL seeins unusual, because PRL can he categorized as a cell-survival factor, if other known physiological functions of PRL are taken into account. In this study, the apoptotic action of PRL was assessed in cultured cells prepared from rat luteal tissue and underlying molecular /cellular mechanism of PRL-induced luteolysis was analyzed. The latest crop of corpora lutea (CLs) were enucleated from rat ovaries at 18:00 h on the proestrous day before the next ovulation. Donor rats were pretreated with CB154, a dopamine agonist, in order to he exempted from the endogenous PRL surge. The harvested GLs were dispersed and cultured with or without PRL (2$\mu$g /ml) for 24 or 48 h. An addition of PRL to the culture medium changed the parameters indicative of cell death via apoptosis: a decrease in cell viability (MTT) and an increase in chromatin condensation. Most of the DNA breakdown in nuclei induced by PRL occurred in steroidogenic cells which were identified by 3$\beta$-HSD activity staining, and the number of 3$\beta$-HSD-positivecells were significantly decreased. Interestingly, most of the cells with an apoptotic nucleus adhered to one or more intact and seemingly non-steroidogenic cells. Because the expression of Fas has heen shown to be abundant in murine ovary, and Fas is known to have an exact physiological role in occurrence of apoptotic cell death, the membrane form-Fas ligand (rnFasL) was quantified in the cell lysate. An addition of PRL increased expression of mFasL. Moreover, an addition of concanavalin A (ConA), a T-cell specific activator, in place of PRL, enhanced the apoptotic parameters. Cumulatively, the apoptotic PRL action was addressed to cells unknown than steroidogenic lute~ cells. The most prohable candidate for the direct target cells is Tcells in the luteal tissue that can express mFasL in response to PRL.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.189-201
• /
• 1999

범용 열가소성 플라스틱(polyethylene(PE), polypropylene(PP), polystyrene(PS), polyethylene-terephthalate(PET), acrylonitrile-butandiene-styrene(ABS))과 폐윤활유의 동시처리 열분해반응 실험을 수행하였다. 반응실험은 40$m\ell$ 용량의 회분식 미분반응기(microreactor)를 이용한 실험과 1리터 용량의 autoclave를 이용한 실험의 두 가지로 구분하여 행하였다. 전자의 경우는 통계적 실험적계획법(statistical experimental design)의 하나인 회전계획실험(rotatable design experiments)으로서 오각형 실험계획(pentagonal experimental design)에 의거한 반응변수 실험을 수행한 후 반응표면(response surface)을 회기분석법에 의하여 분석함으로써 최대의 오일 수율을 얻을 수 있는 최적 반응조건을 추적, 결정하였다. Autoclave 반응실험의 기본적인 목적은 실제 연속공정에 있어서 열분해 반응기 거동을 모사하기 위한 전초단계로서 충분한 시료의 확보를 통하여 이 때 생성된 연로유의 체계적인 분석(비등점분포특성, 진공증류, 기체분석, 원소분석, 발열량, 비중 등)을 행함으로써 연료유 수율 및 품질을 모사하고자 하였다. 미분반응기 실험에 있어서 주 범용열가소성수지인 PE, PP 그리고 PS는 각각의 최적반응조건하에서 거의 100%에 가깝게 오일로 전환되었지만 응축수지인 PET와 그래프트공중합수지인 ABS의 오일수율은 각기 78% 및 90%로서 상대적으로 낮게 나타났다. Autoclave를 이용한 실험의 경우 혼합플라스틱을 폐유에 대하여 40wt% 혼합하여 열분해하였을 때, 80wt% 오일, 15wt% 코우크, 그리고 나머지 5wt%는 탄화수소기체(C1-C6)로 전환되었다. 진공증류(252$^{\circ}C$,2 torr) 결과, 기/액-분리도는 3으로서 이는 생성오일의 75wt%가 경질연료유(가솔린, 등유, 경유)로 회수 가능하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4697-4706
• /
• 2010

This paper suggested the optimal operating design method using simulation and ANP(Analytic Network Process) for mass-customization in the automotive component manufacturing industry. For this, first of all, we built the simulation model including various and complex factors in the field, and estimated the meta-model by RSM(Response Surface Method). Secondly using ANP, we calculated the weight of relative importance of evaluation factors gathered from decision makers. And then, we proposed the optimal operation designs by MOGA(Multi-Objective Genetic Algorithm), analyzed results of them. Moreover, by comparing the results with the consequences using AHP(Analytic Hierarchy Process), we showed its superiority of suggested method to the manner using AHP, because it reflects inner, outer dependency, and inter-relation among judgement factors. In conclusion, through this process, we can present the better way to serve mover effective, precise, and accurate information to decision makers when they build operation design for mass-customization system as automotive parts production system.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.696-700
• /
• 2009

In this paper, we present a framework which enables users to interact naturally with hand gestures on a digital table. In general tabletop applications, one gesture is mapped to one function or command. Therefore, users should know these relations, and make predefined gestures as input. In contrast, users can make input gesture without cognitive load in our system. Instead of burdening users, the system possesses knowledge about gesture interaction, and infers proactively users' gestures and intentions. When users make a gesture on the digital surface, the system begins to analyze the gestures and designs the response according to users' intention.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.174-178
• /
• 2001

In order to reduce the lead-time and cost, recently the technology of rapid protoyping and manufacturing(RPM)has been widely used. Machining process is still considered as one of the effective RPM methods that have been developed and currently available in the industry. It also offers practical advantages such as precision and versatility. Some considerations are still required during the machining process. One of the most important points is fixturing. There should be an effective method of fixturing since the fixturing time depends on the complexity of geometry of the part to be machined. In this paper, the rapid manufacturing process has been developed combining machining with automatic filling. The proposed fixturing technique using automatic filling can be widely applicable to free surface type of product such as a fan. In the filling stage, remeltable material is chosen for the filling process. An automatic set-up device attachable to the table of the machine has also been developed. The device ensures the quality during a series of machining operations. This proposed process has shown to be a useful method to manufacture the required products with the reduced the response-time and cost.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.608-616
• /
• 1996

To propose the use of skipjack processing by-product(SPB) as a food material, the optimal condition for the production of the SPB hydrolysate through enzyme treatment was obtained using RSM(Response Surface Methodology). Among eight pretenses test, Pretense $P^{TM}$ was screened primarily on the aspect of production cost and taste of the product. The extent of autolysis accompanied by endogenous enzyme in the SPB was almost negligible as compared with that of Protense $P^{TM}$ treatment. The derived model equation was within the satisfiable range as indicated by coefficient of $determination(R^2=0.9460)$ and lack of fit(p>0.1) values. From the results of RSM and ridge analysis, the conditions favoring the higllest degree of hydrolysis were: PH 7.2, $51^{\circ}C,$ reaction time of 3.94 hr, substrate concentration of 33.3%, and enzym $e_strate ratio of 0.48%.48%.8%.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.137-137
• /
• 2003

Conducting PPy/PVA composite and pure PPy gas sensors were prepared by in-situ vaporstate polymerization method in a vaporization chamber under N2 condition, by exposing the pre-coated electrode with PVA/FeC13 to distilled pyrrole monomer. The various electrical sensing behaviors of both types of sensors were systematically investigated by a flow measuring system including mass flow controller (MFC) and bubbling bottle. The FT-Raman spectroscopy of vapor state polymerized PPy was identical to that of chemically polymerized PPy, confirming the same chemical structure. Both types of sensors had positive sensitivity when exposed to methanol gas. The sensitivity varied linearly with gas concentration in the range of 50ppm to 1059ppm. The detection limit of PPy/PVA sensor was believed to be as low as 10ppm. The sensitivity of PPy/PVA composite sensor was higher than that of pure PPy sensor. Both the response time and recovery time of PPy/PVA composite sensors were longer than those of pure PPy sensors. The thickness of the sensing film affected the sensitivity this way that the sensor having thinner film had higher sensitivity, indicating that the resistance of polymer film involved in the sensing behavior was bulk resistance rather than surface resistance. The reproducibility of PPy/PVA composite sensor was excellent during eight on-off cycles by switching between N2 and 3000ppm methanol gas. The sensitivity of PPy/PVA composite sensor was only maintained for two weeks, while the sensitivity of pure PPy sensor was maintained over two months.

• 한국해양학회지
• /
• v.20 no.3
• /
• pp.6-19
• /
• 1985

Hydrographic data and daily time series of longshore wind, sea level and sea surface temperature were used in order to explain why the upwelling effect in SST is especially prominent near Ulgi-Gampo although the sea level records along the whole southeast coast show a nearly uniform upwelling-downwelling response to wind. Regional difference in intensity of the wind-induced upwelling represented by the SST decrease is attributed to the combined influence of two factors; one is the baroclinic tilting of isotherms due to the East Korea Warm Current (EKWC) near the Ulgi-Gampo coast, the other is the topographic effects around the southeast coast. Baroclinic tilting effect of EKWC which is generally strongest near the coast of Ulgi to Gampo results in both of the shoaling of cold water and the westward trapping of the coldest bottom water over the shallower shelf rather than the deepest troough region off that coast regardless of the season. Therefore, becacse of the cold water ready for upwelling at the subsurface layer, SST responds very rapidly to the upwelling-favorable winds of summer only off the Ulgi-Gampo coast. Spreading isobaths from Pusan to Gempo can reinforce the upwelling of the cold bottom water and its westward trapping.