• 대한기계학회논문집A
• /
• 제31권9호
• /
• pp.924-933
• /
• 2007

An impeller is a important part of turbo-machinery. It has a set of twisted surfaces because it consists of many blades. Five-axis machining is required to produce a impeller because of interference between tool and workpiece. It can obtain good surface integrity and high productivity. This paper proposes finish cutting method for machining impeller with 5-axis machining center and optimization of cutting condition by response surface method. Firstly, cutting methods are selected by consideration of operation characteristics. Secondly, response factors are determined as cutting time and cutting error for prediction of productivity. Experiments are projected by central composite design with axis point. Thirdly, regression linear models are estimated as single surface in the leading edge and as dual surface in the hub surface cutting. Finally, cutting conditions are optimized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1812-1814
• /
• 1999

The effects of polarity of the polymer on transcription-aligned twisted nematic (TN)-liquid crystal display (LCD) on various the polyimide (PI) surfaces were investigated. The monodomain alignment of nematic (N)LC is obtained in cells fabricated by transcription alignment method on PI surface with medium polarity. The LC alignment using transcription alignment method is attributed to polarity of the polymer. The threshold voltage of transcription-aligned TN-LCD decreases with increasing the polarity of the polymer on three kinds of the PI surfaces. The threshold voltage of transcription-aligned TN-LCD on PI surface with high polarity is almost the same compared to rubbing-aligned TN-LCD. The response time of transcription-aligned TN-LCD decreases with the increasing the polarity of the polymer on all PI surfaces. The decay time of transcription-aligned TN-LCD is slow compared with the rubbing-aligned TN-LCD.

• The Journal of Asian Finance, Economics and Business
• /
• 제2권2호
• /
• pp.13-18
• /
• 2015

In this paper the DRC model is presented for solving multi objective problem. The proposed model is a combination of data envelopment analysis, Cuckoo algorithm and the response surface method. Due to reasons like costs, time and irreversible damages, it is not possible to analyze each and every one of the proposed models in practice, so the simulation is used. Since the number of experiments for simulation process is high then the optimization has gone to practice and directs the simulation process. The response surface method is used as one of the approaches of simulation optimization. Furthermore, data envelopment analysis is used to consider several response surfaces as efficiency response surface. Then this efficiency response surface is solved by Cuckoo algorithms. The main advantage of DRC model is to make one efficiency response surface function instate of multi surface function for every output and also using the advantages of Cuckoo algorithms. In order to demonstrate the effectiveness of the proposed approach, the branches of Refah bank in Mashhad is analyzed and the results are presented.

• 한국유체기계학회 논문집
• /
• 제19권2호
• /
• pp.16-20
• /
• 2016

Design optimization of a transonic compressor rotor(NASA rotor 37) was carried out using response surface method(RSM) which is one of the optimization methods. A numerical simulation was conducted using ANSYS CFX by solving three-dimensional Reynolds-averaged Navier Stokes(RANS) equations. Response surfaces that were based on the results of the design of experiment(DOE) techniques were used to find an optimal shape of blade which has the maximum aerodynamic performance. Two objective functions, viz., the adiabatic efficiency and the loss coefficient were selected with three design configurations to optimize the blade shape. As a result, the efficiency of the optimized blade is found to be increased.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.557-564
• /
• 2006

Life-cycle performance and maintaining cost predictions are required for the effective management for bridges. In Korea, the importance of management of bridges has been recognized over the past two decades, resulting in the development of databases and various bridge management support tools by both government and private sectors. However, none of these tools has truly included the expected features of the bridge management system (EMS) for the next generation such as the quantification of the effects of maintenance interventions on bridge condition and safety. In this paper, a novel quantification process to simulate the life-cycle performance of steel box bridges has been developed. The process is based on the Response Surface method. Various performance-related variables aloe investigated to identify a set of significant design variables to construct the response surfaces.

• 정보기술응용연구
• /
• 제3권3호
• /
• pp.25-40
• /
• 2001

본 논문에서는 유전적 프로그래밍(Genetic Programing)을 이용하여 최적의 다항식을 생성하는 기법을 제시하고자 한다. 다항식은 비선형성이 큰 응답면을 모델링해야 하며, 이를 위하여 GP 트리 생성시 2-3차 오더의 Taylor Series를 사용하는 방법을 시도하였다. 아울러 생서되는 다항식의 크기를 제어하기 위해서 GP 트리가 표현할 수 있는 다항식의 최대 차수를 제한함과 동시에 하나의 주 트리와 보 트리로 구성되는 GAGPT(Group of Additive Genetic Programming Trees) 사용을 모색하였다. 마지막으로 두 개의 응용 예를 통하여 본 방법의 유용성을 검증하였다.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1133-1138
• /
• 2012

본 논문은 최적제어에 기초하여 비선형 슬라이딩 평면을 설계하는 것이다. 최적제어입력에 의한 상태 궤적을 Frobenius 정리와 matrix decomposition 방법에 의해 구하였고, 이 궤적을 시스템의 슬라이딩 평면으로 설정하였다. 상태는 초기부터 슬라이딩 평면을 유지하며, 그 결과 초기상태 단계로부터 전 영역까지 시스템의 강인성은 보장 받을 수 있으며, 도달시간 동안 발생 될 수 있는 불확실성과 외란의 영향을 제거되고, 큰 제어 입력의 문제도 해결할 수 있었다. 그리고 최적경로를 슬라이딩 평면으로 설정함으로 추적시간을 줄일 수 있었다. 역진자 시스템을 사용하여 그 타당성을 보인다.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.74-81
• /
• 2006

Probabilistic Risk Assessment considering statistically random variables is performed for the preliminary design of a Arch Bridge. Component reliabilities of girders have been evaluated using the response surfaces of the design variables at the selected critical sections based on the maximum shear and negative moment locations. Response Surface Method(RSM) is successfully applied for reliability analyses for this relatively small probability of failure of the complex structure, which is hard to be obtained by Monte-Carlo Simulations or by First Order Second Moment Method that can not easily calculate the derivative terms of implicit limit state functions. For the analysis of system reliability, parallel resistance system composed of girders is changed into parallel series connection system. The upper and lower probabilities of failure for the structural system have been evaluated and compared with the suggested prediction method for the combination of failure modes. The suggested prediction method for the combination of failure modes reveals the unexpected combinations of element failures in significantly reduced time and efforts compared with the previous permutation method or system reliability analysis method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.295-300
• /
• 2007

Probabilistic Risk Assessment considering statistically random variables is performed for the preliminary design of a Arch Bridge. Component reliabilities of girders have been evaluated using the response surfaces of the design variables at the selected critical sections based on the maximum shear and negative moment locations. Response Surface Method (RSM) is successfully applied for reliability analyses for this relatively small probability of failure of the complex structure, which is hard to be obtained by Monte-Carlo Simulations or by First Order Second Moment Method that can not easily calculate the derivative terms of implicit limit state functions. For the analysis of system reliability, parallel resistance system composed of girders is changed into parallel series connection system. The upper and lower probabilities of failure for the structural system have been evaluated and compared with the suggested prediction method for the combination of failure modes. The suggested prediction method for the combination of failure modes reveals the unexpected combinations of element failures in significant]y reduced time and efforts compared with the previous permutation method or system reliability analysis method.

• International Journal of Fluid Machinery and Systems
• /
• 제9권2호
• /
• pp.143-149
• /
• 2016

In this study, a method for the multi-objective optimization of an impeller for a centrifugal compressor using fluid-structure interaction (FSI) and response surface method (RSM) was proposed. Numerical simulation was conducted using ANSYS CFX and Mechanical with various configurations of impeller geometry. Each design parameter was divided into 3 levels. A total of 15 design points were planned using Box-Behnken design, which is one of the design of experiment (DOE) techniques. Response surfaces based on the results of the DOE were used to find the optimal shape of the impeller. Two objective functions, isentropic efficiency and equivalent stress were selected. Each objective function is an important factor of aerodynamic performance and structural safety. The entire process of optimization was conducted using the ANSYS Design Xplorer (DX). The trade-off between the two objectives was analyzed in the light of Pareto-optimal solutions. Through the optimization, the structural safety and aerodynamic performance of the centrifugal compressor were increased.