• Coupled systems mechanics
• /
• 제9권3호
• /
• pp.289-309
• /
• 2020

The paper studies the fluid flow profile contained between the orthotropic plate and rigid wall under the action of the moving load on the plate and main attention is focused on the fluid velocity profile in the load moving direction. It is assumed that the plate material is orthotropic one and the fluid is viscous and barotropic compressible. The plane-strain state in the plate and the plane flow of the fluid is considered. The motion of the plate is described by utilizing the exact equations of elastodynamics for anisotropic bodies, however, the flow of the fluid by utilizing the linearized Navier-Stokes equations. For the solution of the corresponding boundary value problem, the moving coordinate system associated with the moving load is introduced, after which the exponential Fourier transformation is employed with respect to the coordinate which indicates the distance of the material points from the moving load. The exact analytical expressions for the Fourier transforms of the sought values are obtained, the originals of which are determined numerically. Presented numerical results and their analyses are focused on the question of how the moving load acting on the face plane of the plate which is not in the contact with the fluid can cause the fluid flow and what type profile has this flow along the thickness direction of the strip filled by the fluid and, finally, how this profile changes ahead and behind with the distance of the moving load.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.181-187
• /
• 2017

Flow of electrically conducting nanofluids is of pivotal importance in countless industrial and medical appliances. Fluctuations in thermophysical properties of such fluids due to variations in temperature have not received due attention in the available literature. Present investigation aims to fill this void by analyzing the flow of copper-water nanofluid with temperature dependent viscosity past a Riga plate. Strong wall suction and viscous dissipation have also been taken into account. Numerical solutions for the resulting nonlinear system have been obtained. Results are presented in the graphical and tabular format in order to facilitate the physical analysis. An estimated expression for skin friction coefficient and Nusselt number are obtained by performing linear regression on numerical data for embedded parameters. Results indicate that the temperature dependent viscosity alters the velocity as well as the temperature of the nanofluid and is of considerable importance in the processes where high accuracy is desired. Addition of copper nanoparticles makes the momentum boundary layer thinner whereas viscosity parameter does not affect the boundary layer thickness. Moreover, the regression expressions indicate that magnitude of rate of change in effective skin friction coefficient and Nusselt number with respect to nanoparticles volume fraction is prominent when compared with the rate of change with variable viscosity parameter and modified Hartmann number.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.18-30
• /
• 2015

This paper focuses on a systematical and in-depth analysis of the reactive power and soft-switching regions of Dual Active Bridge (DAB) converters with dual-phase-shift (DPS) control to achieve high efficiency in a wide operating range. The key features of the DPS operating modes are characterized and verified by analytical calculation and experimental tests. The mathematical expressions of the reactive power are derived and the reductions of the reactive power are illustrated with respect to a wide range of output power and voltage conversion ratios. The ZVS soft-switching boundary of the DPS is presented and one more leg with ZVS capability is achieved compared with the CPS control. With the selection of the optimal operating mode, the optimal phase-shift pair is determined by performance indices, which include the minimum peak or rms inductor current. All of the theoretical analysis and optimizations are verified by experimental tests. The experimental results with the DPS demonstrate the efficiency improvement for different load conditions and voltage conversion ratios.

• 한국실내디자인학회논문집
• /
• 제21권5호
• /
• pp.135-144
• /
• 2012

Since Seoul was selected as the world design capital at the end of 2007, the endeavors to modernize the Korean unique beauty is becoming more tangible. Especially, the commercial spaces to be used by the general public and tourists have the value for study in the respect that such spaces for the national iconic images and have a large and far-reaching effect to transmit the national identity. Therefore, this study analyzed the design coordination properties in the Koreanity expression found in the modern commercial spaces. the foundation for the analysis was based on Leonard Koren's work on the arrrangement rhetoric theory, 'Arranging things(2003), and the contents of Korean expression were reviewed with professional jounals. the results are as follows: First, the design coordination properties in the Koreanity expression shown in modern commercial spaces are black-white contrast, natural materials, curved shapes, brevity, and simple beauty. Especially, some elements such as wood, traditional Korean papers, stones, mid-to-low chroma natural colors, checked patterns, and crazy patterns are used with overlapping and it is viewed that it is necessay to more aggressively seek for the disappeared traditional elements in the Korean modeling properties. Second, the concrete images of Korean expressions could be summarized as four adjective image groups, Natural, Subtitle, Gentle and Magnificent.

• 응용통계연구
• /
• 제6권2호
• /
• pp.355-370
• /
• 1993

일원변량모형에서 처리효과와 오차항의 분포가 임의의 분포를 따를 때, NINQE 추정량의 효율성을 MSE와 편의 판정기준아래에서 ANOVA, MIVQUE, REML, ML 추정량과 비교하여 알아 본다. 그리고 역행렬의 계산이 필요하지 않는 간편한 MIVQUE 추정량, REML 추정량과 ML 추정량의 계산 방법이 주어진다. 또한 MINQE의 효율성을 높일 수 있는 사전추측값을 제공하는 방법이 제안된다. 결론적으로 MINQE 추정량은 비록 편의는 다른 추정량들에 대해서 크지만, 모든 분포에 대해서 MSE의 판정기준아래에서 가장 효율성이 높으며, 변량인자들이 따르는 분포의 첨도가 클수록 그 효율성은 증가한다.

• Steel and Composite Structures
• /
• 제17권5호
• /
• pp.573-599
• /
• 2014

A new type of connection for steel-concrete composite bridges was developed by the Steel Structures Laboratory of Ecole Poytechinque $F{\acute{e}}d{\acute{e}}rale$ de Lausanne. Resistance to longitudinal shear is based on the development of shear stresses in the confined interfaces which form the connection. Confinement is provided by the reinforced concrete slab which encloses the connection and restrains the uplift (lateral separation) of the interfaces by developing normal stresses. The experimental investigation of the interfaces, under static and cyclic loading, enabled the development of the laws describing the structural behaviour of each interface. Those laws were presented by the authors in previous papers. The current paper focuses on the continuity of the research. It presents the experimental investigation on the new connection by means of push-out tests on specimens submitted to static and cyclic shear loading. Investigation revealed that the damage in the connection, due to cyclic loading, is expressed by the accumulation of a residual slip. A safe fatigue failure criterion is proposed for the connection which enabled the verification of the connection for the fatigue limit state with respect to the limit of fatigue. A numerical model is developed which takes into account the laws describing the interface behaviour and the analytical expressions for the confinement effect, the latter obtained by performing finite element analysis. This numerical model predicts the shear resistance of the connection and enables to assess its fatigue limit which is necessary for the fatigue design proposed.

• Bulletin of the Korean Chemical Society
• /
• 제8권4호
• /
• pp.242-246
• /
• 1987

The hydrogen abstraction reactions of $SiH_4, SiH_2Cl_2 \;and\; SiHCl_3$ by ground state chlorine atoms generated photochemically from chlorine molecules have been studied at temperatures between 15 and $100^{\circ}C.$ The absolute rates for the reactions have been obtained by a competition technique using ethane as a competitor. The rate expressions ($in cm^3/mol/s$) are found to conform to an Arrhenius rate law: $k_{SiH_4} = (7.98 {\pm} 0.42) {\times} 10^{13}$ exp $[-(1250 {\pm}20)/T].$ $k_{SiH_2Cl_2} = (2.25 {\pm} 0.12) {\times} 10^{15}$ exp[-(1010 ${\pm}$ 10)/T]. $k_{SiHCl_3} = (9.04 {\pm} 0.28) {\times} 10^{14}\; exp[-(1200 {\pm} 10)/T].$ The activation energies obtained from this study represent the same trend as with the carbon analogues, while this trend was not found with respect to the bond dissociation energies among silicon compound homologues. These anomalous behaviors were interpreted in terms of electronic effects and of the structural differences between these compounds.

• International journal of advanced smart convergence
• /
• 제10권2호
• /
• pp.86-96
• /
• 2021

This cross-sectional survey research carried out with the inquisitive agenda on satisfaction of the translation outcomes as performed by human translation and (machine translation) post-editing. The survey group consisted of 166 Korean translators primarily working with the English, Chinese, and Japanese languages. They were asked to rate the satisfactory level with accuracy, fluency, idiomatic expression, and terminology in the Richter's scale of four. The result reveals that human translation is more satisfactory than post-editing with respect to accuracy, but it is uneasy to assert that accuracy is unsatisfactory in post-editing. On the other hand, the Korean translators are less satisfied with fluency, idiomatic expression, and terminology than accuracy. It can be assumed that although human translation is more satisfactory than post-editing, the accuracy of post-editing seems to be more acknowledged than fluency, idiomatic expression, and terminology, which lead the translators to take the accuracy of raw machine-translation products and to go on to improve the fluency, idiomatic expression, and terminology. Nevertheless, Korean translators believe Korean idiomatic expressions cannot be satisfactorily produced in post-editing, while fluency and terminology can be improved in post-editing.

• Structural Engineering and Mechanics
• /
• 제85권2호
• /
• pp.247-263
• /
• 2023

The paper deals with the study of the mechanical time-harmonic forced vibration of the hydro-piezoelectric system consisting of the piezoelectric plate and compressible viscous fluid with finite depth. The exact equations of motion of the theory of linear electro-elasticity for piezoelectric materials are employed for describing the plate motion, however, the fluid flow is described by employing the linearized Navier-Stokes equations for a compressible (barotropic) viscous fluid. The plane-strain state in the plate and the plane flow of the fluid are considered and the corresponding mathematical problems are solved by employing the Fourier transform with respect to the space coordinate which is on the coordinate axis directed along the platelying direction. The expressions of the corresponding Fourier transform are determined analytically, however, the inverse transforms are found numerically. Numerical results on the interface pressure and the electrical potential are obtained for various PZT materials and these results are discussed. According to these results, in particular, it is established that the electromechanical coupling effect can significantly decrease the interface pressure.

• Structural Engineering and Mechanics
• /
• 제85권5호
• /
• pp.607-620
• /
• 2023

The classical optimal control (COC) method has been widely used for linear quadratic regulator (LQR) problems of structural control. However, the equation of motion of the structure is incorporated into the optimization model as the constraint condition for the LQR problem, which needs to be solved through the Riccati equation under certain assumptions. In this study, an explicit optimal control (EOC) method is proposed based on the explicit time-domain method (ETDM). By use of the explicit formulation of structural responses, the LQR problem with the constraint of equation of motion can be transformed into an unconstrained optimization problem, and therefore the control law can be derived directly without solving the Riccati equation. To further optimize the weighting parameters adopted in the control law using the gradient-based optimization algorithm, the sensitivities of structural responses and control forces with respect to the weighting parameters are derived analytically based on the explicit expressions of dynamic responses of the controlled structure. Two numerical examples are investigated to demonstrate the feasibility of the EOC method and the optimization scheme for weighting parameters involved in the control law.