• Journal of Korean Society for Quality Management
• /
• v.37 no.3
• /
• pp.123-139
• /
• 2009

This study examines the relative efficiency of 34 local public medical centers in Korea. In order to concretely grasp the causes of inefficiency and suggest improvement solutions, the desirable set point was established based on the actual value which needs to be improved. As a result of analysis, we determined that output must be increased while input is held constant in order to improve effectiveness through the actual value and set point. Efficiency cannot be achieved if input is augmented solely to increase output. Also, to increase output, the medical centers need to improve their quality without increasing any input for customer visits and hospitalizations. Further, in order to strategically promote effectiveness and efficiency of local public medical centers, these medical centers must focus on input resource and patient interchange through the mutual cooperation with local private hospitals and university medical centers.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.983-986
• /
• 2002

본 논문은 인터넷과 통신매체의 확산과 더불어 최근에는 기업간, 기업과 정부간에 주로 정형적인 문서교환에 활용되던 초기의 EDI(Electronic Data Interchange)가 멀티미디어 정보교환이 가능한 인터넷의 보급, 확산과 함께 소비자를 대상으로 하는 전자상거래(EC : Electronic Commerce)로 급속히 확산되고 있으며, 이를 지원하기 위해 기업의 정보화 기반을 구현하는 ERP(Enterprise Resource Planning)도 요구되고 있다. 그러나, 전자상거래는 네트워크를 통하여 형성되므로 사용자들은 서로 만나지 않고 거래하게 된다. 이는 전자상거래의 장점이기도 하지만, 반대로 상호간의 신분에 대한 인증이 쉽지 않다는 단점이 된다. 본 논문에서는 이러한 위험을 방지하기 위한 보안기술 및 암호기술에 대해 연구하였다.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1043-1054
• /
• 2002

This paper intends to suggest a XML-based secure E-Procurement system using Unified Modeling Language(UML), as an application system for domestic automobile industry. Applying UML methodology, which is Component-based Development (CBD), we analyzed the workflow on procurement operation of automobile industry and implemented a prototype of efficient E-Procurement system for automobile industry, by developing XML/EDI and XML signature. Also, on this paper, object-oriented CBD is employed to minimize the risk of life cycle and reuse software as mentioned to limitation of information engineering methodology. It enables the interoperability with ERP (Enterprise Resource Planning) as corporate legacy system. This system proposes a solution to apply analysis and design of workflow, component development, interoperability with corporate information system, and XML signature for integrity and authentication of electronic documents in other system so far.

• 한국IT서비스학회:학술대회논문집
• /
• 2002.06a
• /
• pp.96-107
• /
• 2002

21세기를 맞이하는 기업은 세계화와 국제화, 정보의 다양화 및 분산화, 제품수명주기의 단축과 수익률의 감소, 고품질의 제품, 지식산업의 등장, 고객 욕구의 증대 등 다양한 내 ${\cdot}$ 외적 환경변화에 대응해야 하고 경쟁우위를 확보하기 위해 끊임없이 기업의 변화능력을 확보해야 한다. 기업은 제품을 생산하여 판매하는 기업의 시스템 전체가 경쟁력을 갖추어 총체적 우위를 확보하고 고객의 기호와 감성에 호소하는 제품을 만들 수 있도록 다양한 정보를 제공하는 시스템을 필요로 하게 되었다. 즉, 시간과 서비스에 뒤진 고객지원체계는 기업의 성장에 절대적인 마이너스 요인이므로 고객 정보의 효율적 관리, 고객 요구에 대한 신속한 대응, 정기적 고객만족도 조사 등 고객이 원하는 것을 재빠르게 얻어낼 수 있는 고객 친밀형 정보시스템의 확립이 요구되는 것이다. 이를 해결해 줄 수 있는 새로운 경영정보시스템이 바로 WebERP인 것이다. WebERP는 기업의 원활한 자재, 구매활동을 위해 제안된 MRP에서 시작되었으며, 생산관리의 개념을 포함하고 있는 MRPII로 확대되었다가 다시 인사나 회계, 재무 등 조직이나 기업의 전업무영역을 수용하는 종합경영정보시스템으로 발전된 것이다. 현재는 전자상거래와 관련하여 WebERP의 필요성이 부각되었고, 모기업과 협력사간의 구매발주 및 납품관리를 확대시켜 소모성자재(MRO: Maintenance, Repair & Operation) 및 기타 공동구매서비스와 유사업종간의 그룹을 형성하여 ASP(Application Service Provider)의 공동 환경을 이용한 WebERP 환경을 이용한 WebERP활용이 현시점으로 적실히 필요한 것이다. 이는 중소기업들의 공동 협업체제를 도모하여 외세를 대비하는 응집력을 확고히 함으로써 집단체제의 e마켓플레이스 확립과 더불어 국제경쟁을 대비한 방안으로서 집단 공동의 웹환경 인프라가 필요한 것이다. 이러한 배경에서 ASP환경을 이용한 WebERP활용방안과 시스템 구축전략을 경남지역의 기계산업정보화사업단이 추진하는 일반기계, 전기기계, 금속기계, 수송기계, 정밀기계의 5개 업종을 4,877개 기업 대상으로 추진하고 있으며, 그 중 WebERP의 모델로서 2003년도까지 50개 기업을 선정하고, 이는 5개 업종 골고루 선정하여 적용과 표준화 모델로 전개해 나가는 것을 정리한 것이다.

• IE interfaces
• /
• v.23 no.2
• /
• pp.147-155
• /
• 2010

Reliability allocation is defined as a problem of determination of the reliability for subsystems and components to achieve target system reliability. The determination of both optimal component reliability and the number of component redundancy allowing mixed components to maximize the system reliability under resource constraints is called reliability-redundancy allocation problem(RAP). The main objective of this study is to suggest a mathematical programming model and a hybrid parallel genetic algorithm(HPGA) for reliability-redundancy allocation problem that decides both optimal component reliability and the number of component redundancy to maximize the system reliability under cost and weight constraints. The global optimal solutions of each example are obtained by using CPLEX 11.1. The component structure, reliability, cost, and weight were computed by using HPGA and compared the results of existing metaheuristic such as Genetic Algoritm(GA), Tabu Search(TS), Ant Colony Optimization(ACO), Immune Algorithm(IA) and also evaluated performance of HPGA. The result of suggested algorithm gives the same or better solutions when compared with existing algorithms, because the suggested algorithm could paratactically evolved by operating several sub-populations and improve solution through swap, 2-opt, and interchange processes. In order to calculate the improvement of reliability for existing studies and suggested algorithm, a maximum possible improvement(MPI) was applied in this study.

• Asia pacific journal of information systems
• /
• v.2 no.2
• /
• pp.31-54
• /
• 1992

Generating an action plan and obtaining commitment to achieve it is desired in organizations, but not always achieved. Whatever the reason, there is a room for an improved approach to decision making, so that people can arrive at a common understanding of a problem and commitment to action. Those are the purposes of a Decision Conferencing(DC). A DC, one example of single workstation-based GDSSs, is a two-day session attended by a group of people who attempt to resolve important issues of concern to their organization with the help of group facilitation techniques and decision analytic computer modelling. The interchange of differing perspectives on the issues is encouraged by the facilitator who attends to group processes but does not contribute to the content of discussions. Decision analysis provides a variety of structures for modelling the differing perspectives. Information and value judgements are incorporated in these models, whose results usually reveal new, higher-level perspectives on the issues. Information technology is needed to combine the part of the model and to facilitate on-the-spot replay of results. The experimental case study in this paper shows that how a DC can help a Korea's trading company to develop new, corporate level resource allocation strategies which are based on improved consensus among competing participants.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.4
• /
• pp.49-58
• /
• 2004

This study is aimed to define and classify GREEN TOURISM (GT) resources as the basis for rural sustainable development, and to analyze the current conditions of GT and applicable resources in Korea. For these purposes, a field survey about 24 rural villages in Japan and Korea is applied, accompanied by a questionnaire survey of 30 specialists, as well as a literature review. The results of this study are summarized as follows. The concept of GT has 3 important points: interchange between rural and urban residents, staying in villages, and residents' participation. GT resource are divided into 4 types: Agricultural, Ecological, Historical and Living resources in a space and activity program. In addition, the GT resources in Japan are more quantitatively abundant than in Korea, but Korean agricultural and ecological resources were more abundant relatively. According to the several methods above, 18 space and 14 activity programs were classified. Lastly, this study analyzed the applicable 32 Korean resources using the specialists' questionnaire survey. Among the space resources, ecological landscape, farm produce, farm-land, water, and historical landscape have higher applicability, but the applicability of sports, event, commemoration, and divine space are lower. Among the activity programs, farm produce, animal, plant, food&beverage, and living appliance have higher applicability.

• Asia pacific journal of information systems
• /
• v.10 no.4
• /
• pp.1-20
• /
• 2000

Electronic Data Interchange(EDI) has the potential to improve business operations by expediting the exchange of business documents. It will also provide substantive operational and strategic benefits to the trading firms. However, the successful implementation of EDI systems requires the mutual trust and cooperation between the trading firms. The extent of EDI diffusion and performance depends on inter-organizational, intra-organizational, as well as innovation factors. Researches based on the sociopolitical process framework in the use of IT, organizational theory, resource dependence theory, and innovation diffusion theory have identified 3 inter-organizational variables(transaction climate, dependence, external IS expert support) and 4 intra-organizational variables(strategic IS planning, infrastructure, top management support, education/training,), and 3 innovation variables(compatibility, relative advantage, cost) that affect EDI diffusion. In this study, a multi-dimensional measure on EDI diffusion has been developed to capture the external and internal integration. Then, the influence of these 10 variables on the extent to which the EDI adopting firms pursue diffusion has been examined. Whether more diffusion leads to superior performance has also been studied. International trade managers from 107 firms in the trade industry participated in a field survey. The results based on a structural equation model(SEM), developed using AMOS, provide quite a strong support for the hypothesized relations. Both education/training and IT infrastructure influenced external and internal diffusion of EDI systems. Internal diffusion of EDI enables the adopting firms to improve operational and strategic performance, whereas external diffusion contributes only to operational performance.

• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.237-242
• /
• 2011

The 2011 Japanese Society of Turfgrass Science was divided in oral presentation, sectional meeting and small symposium, and the total 55 subject was announced. The oral presentation was reported physiological ecology of turf, disease and weed; field management; pesticidal activity and spectrum of new turf pesticides. Above all, there was presentation that investigated control method of necrotic ring spot of new turf disease and Cyperus brevifolius, annual bluegrass and mouse-ear chickweed. In addition, the control effect of new registration fungicide (Furametpyr) and herbicides (S-metolachlor, Flucetosulfuron and Foramsulfuron) were announced. There was various information interchange through 4 kinds of subjects of a golf course, ground turf, a urban park greens and ground cover plants greening by the sectional meeting, and the genetic resource of turfgrass discussed by small symposium. Specially, park greens sectional meeting was announced about the radioactive material contaminated on mechanism and effectively removal method of the radioactivity contaminant from public park, school ground and domestic lawn.

• Health Policy and Management
• /
• v.15 no.4
• /
• pp.46-64
• /
• 2005

This study was conducted to verify the current criteria and classification system used to determine specialized general hospitals status. In this study, we proposed a new classification system which Is simpler and more convenient than the current one. In the new classification system clinical procedure was chosen as the unit of analysis in order to reflect all the resource consumption and the complexities and degree of medical technologies in determining specialized general hospitals. We developed a statistical model and applied this model to 117 general hospitals which claim their national insurance through electronic data interchange(EDI). Analysis based on 984 clinical procedures and medical facilities' characteristic variable discriminated specialized general hospital in present without misclassification. It means that we can determine specialized general hospital's permission In new way without using the current complicated criteria. This study discriminated specialized general hospital by the new proposed model based on clinical procedures provided by each hospital. For clustering the same types of medical facilities using 984 clinical procedures, we executed multidimensional scale analysis and divided 117 hospitals into 4 groups by two axises : a variety of procedure and the Proportion of high technology Procedure. Therefore, we divided 117 hospitals into 4 groups and one of them was considered as specialized general hospital. In discriminating analysis, we abstracted proportion of 16 clinical procedures which effect on discriminating the specialized general hospital in statistical system also we identify discriminating function which include these variables. As a result, we identify 2 discriminating functions, one is for current discriminating system and the other two is for new discriminating system of specialized general hospital.