• 한국위성정보통신학회논문지
• /
• 제7권3호
• /
• pp.22-25
• /
• 2012

논문에서는 마이크로스트립 안테나 제작에 상용화되어 있는 에폭시계 FR-4 기판과 압전물질인 $LiNbO_3$와 PVDF를 기판으로 사용하여 마이크로스트립 패치 안테나를 제작하였다. 제작된 마이크로스트립 안테나에 DC 전계를 인가하였을 때 압전기판인 $LiNbO_3$와 PVDF의 경우 실시간으로 주파수 이동을 구현하여 안테나 제작 후에도 물리적 변형을 가하지 않고 공진주파수와 대역폭을 이동 및 조정할 수 있는 단일형 마이크로스트립 패치 안테나를 제작하고 특성을 분석하였다. 압전 특성을 갖는 $LiNbO_3$, PVDF 압전기판과 에폭시계 FR-4 기판을 사용하여 마이크로스트립 패치 안테나를 제작한 후 DC 전계를 인가함으로써 공진주파수의 이동을 확인하였다. 실험을 통하여 PVDF 압전기판에 400V/mm까지 DC 전계를 인가하였을 경우 최대 각각 17 MHz의 변화 값을 보였고 $LiNbO_3$는 29 MHz의 변화를 보였지만 FR-4 기판에서는 아무런 변화가 없었다. 이러한 결과들로부터 압전기판을 사용한 마이크로스트립 안테나는 안테나 제작 후에도 물리적 변형을 가하지 않고 공진주파수와 대역폭을 이동 및 조정할 수 있는 특성을 이용하여 최근 이동통신 분야에 많이 쓰이고 있는 마이크로스트립 안테나에 응용 가능하리라 사료된다.

• 전기학회논문지P
• /
• 제67권2호
• /
• pp.82-89
• /
• 2018

This paper presents a novel prototype of dual mode control based phase shift ZVS PWM high frequency load resonant inverter with lossless snubber capacitors in addition to a single active auxiliary resonant snubber for electromagnetic induction heating(IH) foam metal based consumer fluid dual packs(DPA) heater. The operating principle in steady state and unique features of this voltage source soft switching high frequency inverter circuit topology are described in this paper. The lossless snubber and auxiliary active resonant snubber assisted constant frequency phase shift ZVS PWM high frequency load resonant inverter employing IGBT power modules actually is capable of achieving zero voltage soft commutation over a widely specified power regulation range from full power to low power. The steady state operating performances of this dual mode phase shift PWM series load resonant high frequency inverter are evaluated and discussed on the basis of simulation and experimental results for induction heated foam metal heater which is designed for compact and high efficient moving fluid heating appliance in the consumer pipeline systems.

• 조명전기설비학회논문지
• /
• 제14권1호
• /
• pp.109-117
• /
• 2000

본 논문은 고주파 유도가열용 전원에 사용되는 인버터에 WVF 기능을 부여한 풀-브릿지형 복공진 고주파 인버터회로를 제시하였다. 제안한 인버터는 직렬공진회로의 전류를 병렬공진회로의 주입전류로 사용하기 때문에 스위치의 전류 분담을 감소시킬 수 있으며, 또한 본 논문은 Phase-shift를 이용하여 스위칭 주파수와는 무관한 독립 출력 제어를 행하였다. 회로의 해석은 정규화 파라메타를 도입하여 범용성 있게 기술하였고, 인버터 특성을 스위칭 주파수, Phase-shift의 위상차각($\phi$) 변화와 제 파라메타에 따라 특성평가를 행하였다. 또한, 이론해석에서 얻은 특성값을 기초로 한 회로 설계 기법의 일 예도 제시하였다. 첨가해서, 실험을 통해 이론 해석의 타당성을 검증하였으며, 향후 유도가열 응용, OC-OC 컨버터 등의 전원 시스템에 웅용 가능성을 보여주고 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.198-201
• /
• 1997

The new system for identification of organic vapours and analysis method of mechanism between organic vapours and sensitive materials were attempted using the resonant resistance and resonant frequency of Quartz Crystal Analyzer (Q. C. A.). The resonant resistance shift means rheological changes in sensitive LB films occurred by the adsorption of organic vapours, while the resonant frequency shift represent the mass of organic vapour loaded in or on the sensitive LB films. It is thought that we can obtain more accurate response mechanism of organic vapour using the resonant frequency and resonant resistance diagram. The polymeric sensitive material were quantitively depositied using the LB method. In the experimental results, the adsorption behavior of organic vapour response can be decided by two type ; surface adsorption and penetration into sensitive material. Organic vapours had different positions in the Frequency-Resistance (F-R) diagram as to the kinds and concentrations of organic vapours. Thus F-R diagram can be applied to the development of one channel gas sensing system using the Quartz Crystal Analyzer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.317-319
• /
• 2000

We fabricated the QCM with Langmuir-Blodgett(LB) film deposited at the different subphase pH and investigated the resonant frequency response by the injection of organic gas response. In the $\pi$-A isotherms, the monolayer on the air/water interface had different limiting area per molecule and showed more condensed status as increasing the subphase pH. When palmitic acid LB film was deposited on the QCM, the resonant frequency shift was proportional to the deposited layer and had more resonant frequency shift in the case of the higher pH range as expected. In the resonant frequency for the injection of organic gas, it has been improved in the case of LB film fabricated at the lower subphase pH range and dependant upon the molecular weight of organic gas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1168-1170
• /
• 2000

A half bridge time sharing type high frequency resonant inverter to give VVVF function in the inverter used as power source of induction heating at high frequency is presented in this paper, this paper also realize the output control of independence irrespective of the switching frequency using Phase-Shift. The analysis of the proposed circuit is generally described by using the normalized parameters. Also, the principle of basic operation and the its characteristics are estimated by the parameters, such as switching frequency, the variation of phase angle(${\varphi}$) of Phase-Shift. It is certain that the proposed circuit will be used and expanded in the high frequency power supplies like induction heating systems.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.167-171
• /
• 2003

Acoustic characteristics of baffled combustion chamber to elucidate suppressing effect of baffle on combustion instability are numerically investigated by linear acoustic analysis. A hub-blade baffle of 5 blades is selected as a candidate one and five variants of baffles with various configuration are designed. Resonant-frequency shift and damping factor are analyzed quantitatively as damping parameters. When the hub is located radially at the pressure node, the decrease of resonant frequency and increase of damping factor in 1R mode are dominant. But sub-1T mode is formed within hub, therefore, there would be a possibility of initiating 1T mode in unbaffled region, which would occur another problem. For smaller hub size, four kinds of axial baffle length is selected. As the axial baffle length increases, resonant frequency shift and increase of damping factor of transverse acoustic modes is obtained. Especially, two close acoustic modes such as 1L and 1T could be overlapped for a certain axial length, resulting in extreme increase of damping factor. The present study based on linear acoustic analysis is expected to be a useful confirming tool to predict acoustic field and design a passive control devices such as baffle and acoustic cavity.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.111-117
• /
• 2003

In the design of the split type free displacer Stilting cryocooler the motion of the displacer is very important to decide the cooling capacity, which depends upon the working gas pressure, the swept volume in the compression space and the expansion space, operating frequency, the phase shift between piston and displacer, etc. In this study, Stirling cryocooler actuated by the electric farce of the dual linear motor is designed and manufactured. Cool down characteristics of the cold end with laser displacement sensor in the expander of the Stilting cryocooler is evaluated. The charging pressure was 15kg$_{f}$/$\textrm{cm}^2$ and operating frequency was 50Hz. Input power and the lowest temperature were about 32W and 67K, respectively. And, displacement of the piston is measured by LVDTs (Linear Variable Differential Transformers), displacement of thedisplacer is measured by laser optic method, and phase shift between piston and displacer is discussed. As the peak-to-peak pressure of the compressor was increased, peak-to-peak displacement of the displacer was increased. The peak-to-peak displacement of the displacer increases in the range of 0 - 64.5Hz(resonant frequency of the displacer), but decreases steeply when the operating frequency is bigger than the resonant frequency. Finally when the phase shift between displacements of the Piston and displacer is 45。, operating frequency is optimum and is decided by resonant frequency of the expander, mass and cross section area of the displacer and constant by friction and flow resistance.e.

• Journal of Power Electronics
• /
• 제8권4호
• /
• pp.332-344
• /
• 2008

High frequency AC (HFAC) power distribution systems delivering power through a high frequency AC link with sinusoidal voltage have the advantages of simple structure and high efficiency. In a multiple module system, where multiple resonant inverters are paralleled to the high frequency AC bus through connection inductors, it is necessary for the output voltage phase angles of the inverters be controlled so that the circulating current among the inverters be minimized. However, the phase angle of the resonant inverters output voltage can not be controlled with conventional phase shift modulation or pulse width modulation. The phase angle is a function of both the phase of the gating signals and the impedance of the resonant tank. In this paper, we proposed a pulse phase modulation (PPM) concept for the resonant inverters, so that the phase angle of the output voltage can be regulated. The PPM can be used to minimize the circulating current between the resonant inverters. The mechanisms of the phase angle control and the PPM were explained. The small signal model of a PPM controlled half-bridge resonant inverter was analyzed. The concept was verified in a half bridge resonant inverter with a series-parallel resonant tank. An HFAC power distribution system with two resonant inverters connected in parallel to a 500kHz, 28V AC bus was presented to demonstrate the applicability of the concept in a high frequency power distribution system.

• Smart Structures and Systems
• /
• 제25권3호
• /
• pp.279-284
• /
• 2020

Electrical current is usually used to change the damping force of Magnetorheological Dampers (MRDs). However, changing the electrical current could shift the stiffness of the system, the phenomenon that was not considered carefully. This study aims to evaluate this shift. A typical MRD was designed, optimized, and fabricated to do some accurate and detailed experimental tests to examine the stiffness variation. The damper is equipped with a circulating system to prevent the deposition of particles when it is at rest. Besides that, a vibration setup was developed for the experimental study. It is capable of generating vibration with either constant frequency or frequency sweep and measure the amplitude of vibration. The damper was tested by the vibrating setup, and it was concluded that with a change in electrical current from 0 to 1.4 A, resonant frequency would change from 13.8 Hz to 16 Hz. Considering the unchanging mass of 85.1 kg, the change in resonant frequency translates as a shift in stiffness, which changes from 640 kN/m to 860 kN/m.