• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1732-1738
• /
• 2003

The test specimen in environmental vibration test is connected to the fixture through several attachment points. The forces generated by the shaker must be transmitted equally to all attachment points. The forces transmitted to attachment points, however, are different because of the flexural vibration of the fixture. The variations of the transmitted force cause the under-test, especially at anti-resonance frequencies, in vibration test control. Anti-resonance frequencies at the attachment points of the fixture must be same in order to avoid the under-test in vibration test control. The structural modification of the fixture is needed so that anti-resonance frequencies at attachment points have the same value. In this paper, the method to calculate the anti-resonance frequencies and those sensitivities is presented. This sensitivity analysis is applied to the structural modification of the fixture excited at multi-points by the shaker. The antiresonance frequencies at the attachment points of the fixture can have the same value after structural modification, and the under-test in the vibration test control can be removed. Several computer simulations show that the proposed method can remove the under-tests, which are not removed in conventional vibration test control.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권2호
• /
• pp.313-323
• /
• 2013

Offshore floating structures have so-called moonpool in the centre area for the purpose of drilling, installation of subsea structures, recovery of Remotely-Operated Vehicle (ROV) and divers. However, this vertical opening has an effect on the operating performance of floating offshore structure in the vicinity of moonpool resonance frequency; piston mode and sloshing mode. Experimental study based on model test was carried out. Moonpool resonance of floating offshore structure on fixed condition and motion free condition were investigated. And, the effect of cofferdam which is representative inner structure inside moonpool was examined. Model test results showed that Molin's theoretical formula can predict moonpool resonance on fixed condition quite accurately. However, motion free condition has higher resonance frequency when it is compared with that of motion fixed. The installation of cofferdam moves resonance frequency to higher region and also generates secondary resonance at lower frequency. Furthermore, it was found that cofferdam was the cause of generating waves in the longitudinal direction when the vessel was in beam sea.

• Journal of Mechanical Science and Technology
• /
• 제14권7호
• /
• pp.744-751
• /
• 2000

To achieve lower flying height for high areal recording density, the laser zone texturing of the disk needs to be designed to reduce glide height. One problem of the laser bump design is that the regular laser bump pattern often produces glide resonance phenomenon, which leads to failure of the glide height test. However, it was found in this study that glide resonance is an intrinsic problem of the glide head used and resonance phenomenon depends on the type of the head slider, that is, the natural frequency of the slider body. Therefore, higher glide height or glide failure caused by glide resonance does not lead to head/media interface problem in the real drive operating conditions in which the data head is used. Pseudo-random bump pattern greatly reduces the glide resonance. Smaller bump pitch will also help to reduce the glide resonance. However, as bump spacing becomes smaller, glide height will be increased due to increased air pressure developed around the bumps. Lowering bump height is the most effect way to reduce glide avalanche.

• 한국추진공학회지
• /
• 제16권5호
• /
• pp.89-96
• /
• 2012

기존의 펄스에코법은 스틸 연소관 내부에서 고무면으로 초음파를 입사시키므로 검사 도중에 고무면이 오염될 수 있으며, 이로 인해 치명적인 미접착 결함을 유발시킬 수 있다. 상기 방법을 보완할 수 있는 시험 기법을 개발하기 위해 스틸/고무 접착 시험편을 제작하여 스틸면으로 초음파를 입사시켰다. 스틸/고무 접착 시험편으로부터 측정한 고무 공진 주파수는 이론적으로 예측한 공진 주파수와 일치하였다. 본 논문은 고무 공진 주파수를 이용하여 고무 두께를 측정할 수 있는 초음파 공진법에 대해 기술하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.562-569
• /
• 2012

기존의 펄스에코법은 스틸 연소관 내부에서 고무면으로 초음파를 입사시키므로 검사 도중에 고무면이 오염될 수 있으며, 이로 인해 치명적인 미접착 결함을 유발시킬 수 있다. 상기 방법을 보완할 수 있는 시험기법을 개발하기 위해 스틸/고무 접착 시험편을 제작하여 스틸면으로 초음파를 입사시켰다. 스틸/고무 접착 시험편으로부터 측정한 고무 공진 주파수는 이론적으로 예측한 공진 주파수와 일치하였다. 본 논문은 고무 공진 주파수를 이용하여 고무 두께를 측정할 수 있는 초음파 공진법에 대해 기술하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.601-606
• /
• 2004

Vibration spectrums of the test loop according to flow conditions were analyzed in order to identify the sources of vibration at peak frequencies. While a flow condition of the sweep test was changed by varying pump rotational speed from 450 rpm to 1500 rpm by the step 150 rpm, midspan acceleration of the test section in width-direction and dynamic pressure perturbation in the test section were measured. Other sources of vibration due to the flow structure interactions, such as acoustic resonance, blade pulsing frequency and bellows wrinkles, were investigated. Pressure perturbation in the section and acoustic resonance due to branch pipe give major effects to the vibration of the test section in high frequency range of 1.5 kHz to 2.8 kHz.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.230-237
• /
• 2012

확대부 내열재의 스틸과 FRP 사이에 존재하는 미접착 결함과 미충전 결함을 검출하기 위해 초음파 공진법을 적용하였다. 초음파 공진법은 초음파 신호가 증폭되기 때문에 펄스에코법으로 검출하기 어려운 미접착 결함 및 에폭시 미충전 결함을 쉽게 검출할 수 있다. 공진 주파수는 삼중 매질의 음압 반사계수를 이용하여 예측하였고, 시험편의 초음파 신호에 대해 고속푸리에변환을 실시하여 측정하였다. 예측한 공진 주파수는 측정한 공진 주파수와 일치하므로 초음파 공진을 입증하였다.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.585-594
• /
• 2013

공진형 파동에너지 추출시스템은 권혁민 등(2010)에 의해 최초로 제안되었다. 본 시스템은 계류장치와 직렬발전기 그리고 발전기를 가진하는 부이로 구성되어 있으며 직렬발전기의 운동자는 부이의 수직운동에 의해 내부 진동하는 시스템이다. 하지만, 우리나라와 같이 파랑에너지가 비교적 적은 지역에서는 가진체인 부이의 수직운동 크기를 증폭시킬 필요가 있다. 본 연구는 발전기를 탑재한 부이가 공진할 수 있도록 제원을 조절하고 이의 증폭효과를 실험적으로 확인하였다. 모형부이는 공진주기 1.96 sec에 해당하는 흘수를 확보하도록 제원을 조절하였다. 부이공진 실험은 최대수심 6.0 m, 폭 8 m, 길이 110 m인 대형수조에서 규칙파 및 불규칙파에 대하여 수행되었다. 실험파는 평상파의 파형경사에 해당하는 약 0.01에 상응하도록 파를 선택하였다. 부이의 수직변위 관측시계열 자료는 규칙파의 진폭증폭율과 불규칙파의 스펙트럼 면적비에 대하여 분석하였다. 분석결과, 규칙파실험은 모형 전력생산부이의 공진주기 1.96 sec에서 최대 진폭증폭율 5.66을 얻었으며 불규칙파의 경우는 첨두주기가 1.96 sec보다 약간 짧은 1.85 sec에서 최대 스펙트럼면적비 20.73을 얻었다. 본 실험성과로부터 부이의 공진설계가 전력생산의 증대에 유효하며 우리나라와 같이 비교적 파랑에너지가 적은 지역에서 상업적 전력생산을 위하여 필수불가결함을 알았다.

• 한국정밀공학회지
• /
• 제24권7호
• /
• pp.69-74
• /
• 2007

The paper proposes a new sonic resonance test for a elastic modulus measurement which is based on time-average electronic speckle pattern interferometry(TA-ESPI) and Euler-Bernoulli equation. Previous measurement technique of elastic constant has the limitation of application for thin film or polymer material because contact to specimen affects the result. TA-ESPI has been developed as a non-contact optical measurement technique which can visualize resonance vibration mode shapes with whole-field. The maximum vibration amplitude at each vibration mode shape is a clue to find the resonance frequencies. The dynamic elastic constant of test material can be easily estimated from Euler-Bernoulli equation using the measured resonance frequencies. The proposed technique is able to give high accurate elastic modulus of materials through a simple experiment set up and analysis.

• 한국분무공학회지
• /
• 제29권1호
• /
• pp.23-31
• /
• 2024

This study conducted a 3D thermo-acoustic analysis based on the helmholtz solver to analyze the major resonance modes causing combustion instability in a single-can combustor. The experimental investigations were carried out on a test rig designed by the Korea Institute of Machinery & Materials (KIMM) under various conditions of hydrogen co-firing and fuel staging. Through these experiments, two primary unstable frequencies were identified. To determine the resonance modes of these frequencies, a 3D thermo-acoustic analysis was conducted using temperature information from the test rig. The results confirmed that the unstable frequencies observed in the experiments were all longitudinal modes. Additionally, the mode shapes identified in the analysis facilitated a simplification of the exit geometry for the low-order network model, confirming that this did not significantly affect the fundamental resonance modes.