• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.108-109
• /
• 2012

This talk will begin with the demonstration of facile synthesis of silicon nanostructures using the magnesiothermic reduction on silica nanostructures prepared via self-assembly, which will be followed by the characterization results of their performance for energy storage. This talk will also report the fabrication and characterization of highly porous, stretchable, and conductive polymer nanocomposites embedded with carbon nanotubes (CNTs) for application in flexible lithium-ion batteries. It will be presented that the porous CNT-embedded PDMS nanocomposites are capable of good electrochemical performance with mechanical flexibility, suggesting these nanocomposites could be outstanding anode candidates for use in flexible lithium-ion batteries. Directed self-assembly (DSA) of block copolymers (BCPs) can generate uniform and periodic patterns within guiding templates, and has been one of the promising nanofabrication methodologies for resolving the resolution limit of optical lithography. BCP self-assembly processing is scalable and of low cost, and is well-suited for integration with existing semiconductor manufacturing techniques. This talk will introduce recent research results (of my research group) on the self-assembly of Si-containing block copolymers for the achievement of sub-10 nm resolution, fast pattern generation, transfer-printing capability onto nonplanar substrates, and device applications for nonvolatile memories. An extraordinarily facile nanofabrication approach that enables sub-10 nm resolutions through the synergic combination of nanotransfer printing (nTP) and DSA of block copolymers is also introduced. This simple printing method can be applied on oxides, metals, polymers, and non-planar substrates without pretreatments. This talk will also report the direct formation of ordered memristor nanostructures on metal and graphene electrodes by the self-assembly of Si-containing BCPs. This approach offers a practical pathway to fabricate high-density resistive memory devices without using high-cost lithography and pattern-transfer processes. Finally, this talk will present a novel approach that can relieve the power consumption issue of phase-change memories by incorporating a thin $SiO_x$ layer formed by BCP self-assembly, which locally blocks the contact between a heater electrode and a phase-change material and reduces the phase-change volume. The writing current decreases by 5 times (corresponding to a power reduction of 1/20) as the occupying area fraction of $SiO_x$ nanostructures varies.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.133-138
• /
• 2008

To analyze incident waves traveling from the deep ocean is very important in that it is based on resolving problems occurred in coastal areas. In general, numerical models and analytical solutions are used to analyze wave transformation. Although a numerical model can be applied to various bottoms and wave conditions, it may have some cumbersome numerical errors. On the other hand, an analytical solution has an advantage of obtaining the solution quickly and accurately without numerical errors. The analytical solution can, however, be utilized only for specific conditions. In this study, the analytical solution of the mild-slope equation has been developed. It can be applied to various conditions combing a numerical technique and an analytical approach while minimizing the numerical errors. As a result of comparing the obtained solutions in this study with those of the previously developed numerical model, A good agreement was observed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.359-366
• /
• 2018

Social infrastructure facilities that have been under construction since the country's high-growth period are undergoing rapid aging, and safety assessments of large structures such as bridge tunnels, which can be directly linked to large-scale casualties in the event of an accident, are necessary. Wireless smart sensor networks that improve SHM(Structural Health Monitoring) based on existing wire sensors are difficult to construct economical and efficient system due to short signal reach. The LPWAN, Low Power Wide Area Network, is becoming popular with the Internet of Things and it is possible to construct economical and efficient SHM by applying it to structural health monitoring. This study examines the applicability of LoRa LPWAN to structural health monitoring and proposes a channel usage pre-planning based LoRa network operation method that can efficiently utilize bandwidth while resolving conflicts between channels caused by using license - exempt communication band.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.534-548
• /
• 2021

In this paper, the feasibility of generating solar power near an abandoned quarry is examined with the objectives of resolving the essential problems that quarries encounter, such as rockfalls and space usage issues. On an abandoned quarry site in Sadang, Seoul, Republic of Korea, two different PV installation methods were analyzed. The first is attaching PV directly on the quarry slope. Since there are no corresponding safety standards and precedents for installing solar panels directly on slopes, the power generation potential was calculated by using topographic data and reasonable assumptions. The surface area of cut slope section was extracted from the Digital Elevation Model(DEM) via ArcGIS and Python programming to calculate the tilt and power capacity of installable panels. The other approach is installing PV as a rockfall barrier, and the power generation potential was analyzed with the assumption that the panel is installed in the direction of facing solar irradiation. For the derivation of power generation, the renewable energy generation analysis program SAM(System Advisor Model) was used for both methods. According to the result, quarries that have terminated resource extraction and remain devastated have the potential to be transformed into renewable energy generation sites.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.1
• /
• pp.50-56
• /
• 2007

Impact of thermal discharge of nuclear power plant on marine environment is naturally reflected in biogeochemical changes of seawater. Until now, many investigation activities and reports of impact analysis of marine environment were occasionally inadequate to provide sufficient justification in resolving controversial conflict of interests related with thermal discharge of nuclear power plant. From the scrutinized examination of recent 17 reports published in Korea between 2002 and 2004, the most apparent issue was inadequacy of sampling design and absence of significance of many measured parameters. In many cases, lack of statistical interpretation of raw data incurred subjective or ambiguous assessment results, which failed in deducing mutual concurrence between the parties of interest. In overall all, the main reasons for impairing integrity of previous reports seem to be inconsistency of environmental investigation procedures between research institutions, inadequate sampling design at the discretion of institutions and lack of objectivity of impact assessment based on statistical interpretation. Therefore, the primary goal of this study is to (1) discuss the blown issues on previous routine practice of seawater quality assessment procedures, and to (2) provide improved investigation procedures and rational standard criteria strictly based on statistical analysis for the better seawater quality assessment, which could be supported by scientific community, public agency, investigation institution and the other parties of interest.

• ETRI Journal
• /
• v.26 no.3
• /
• pp.229-240
• /
• 2004

This paper reports on our development of a dual-mode transceiver for a CMOS high-rate Bluetooth system-onchip solution. The transceiver includes most of the radio building blocks such as an active complex filter, a Gaussian frequency shift keying (GFSK) demodulator, a variable gain amplifier (VGA), a dc offset cancellation circuit, a quadrature local oscillator (LO) generator, and an RF front-end. It is designed for both the normal-rate Bluetooth with an instantaneous bit rate of 1 Mb/s and the high-rate Bluetooth of up to 12 Mb/s. The receiver employs a dualconversion combined with a baseband dual-path architecture for resolving many problems such as flicker noise, dc offset, and power consumption of the dual-mode system. The transceiver requires none of the external image-rejection and intermediate frequency (IF) channel filters by using an LO of 1.6 GHz and the fifth order onchip filters. The chip is fabricated on a $6.5-mm^{2}$ die using a standard $0.25-{\mu}m$ CMOS technology. Experimental results show an in-band image-rejection ratio of 40 dB, an IIP3 of -5 dBm, and a sensitivity of -77 dBm for the Bluetooth mode when the losses from the external components are compensated. It consumes 42 mA in receive ${\pi}/4-diffrential$ quadrature phase-shift keying $({\pi}/4-DQPSK)$ mode of 8 Mb/s, 35 mA in receive GFSK mode of 1 Mb/s, and 32 mA in transmit mode from a 2.5-V supply. These results indicate that the architecture and circuits are adaptable to the implementation of a low-cost, multi-mode, high-speed wireless personal area network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.1957-1964
• /
• 1994

In this thesis, a Synthetic Aperture Rarar Processor that is possible real-time handling is implemented using CW(Continuose Wave) laser as a light source, CCD(charge Coupled Device) as a time integrator, and AOD(Acousto-Optic Device) as the space integrator. One of the advantages of the proposed system is that it does not require driving circuits of the light source. To implement the system, the linear frequency modulation(chirp) technique has been used for radar signal. The received data for the unit target was processed using 7.80 board and accompanying electronic circuits. In order to reduce the smear effect of the focused chirp signal which occurs Bragg diffrection angle of the AOD has been utilized to make sharp pulses of the laser source, and the pulse made synchronized with the chirp signal. Experiment and analysis results of the data and images detected from CCD of the proposed SAR system demonstrated that detection effect is degrated as the unit target distance increases, and the resolving power is improved as the bandwidth of the chirp signal increases. Also, as the pulse width of the light source decreases, the smear effect has been reduced. The experimental results assured that the proposed system in this papre can be used as a real time SAR processor.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.810-814
• /
• 2003

For the phylogenetic analysis of procaryotes, 16S rRNA gene has been used. In spite of it's common use, so high conservative of 16S rRNA gene limited resolving power, hence other molecule was applied in this study and the result was compared with that of 16S rRNA. COG (Clusters of Orthologous of protein) algorithm revealed that three COGs were only detected in 42 procaryotes ; transcription elongation factor (COG0195), bacterial DNA primase (COG0358) and uridylate kinase (COG0528). Uridylate kinase gene was selected owing to the similarity and one single copy number in each genome. Phylogenetic tree of 16S rRNA gene and uridylate kinase showed similarities and differences. Uridylate kinase may help the problem of very high conservative of 16S rRNA gene in rhylogenetic analysis and it would help to access more accurate discrimination and phylogenetic analysis of bacteria.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.84.1-84.1
• /
• 2013

We present a python-based data reduction pipeline for the Immersion GRating INfrared Spectrograph (IGRINS). IGRINS covers the complete H- and K-bands in a single exposure with a spectral resolving power of greater than 40,000. IGRINS is designed to be compatible with telescopes of diameters ranging from 2.7-m (the Harlan J. Smith telescope at McDonald Observatory) to 8-10m. Commissioning and initial operation will be on the 2.7-m telescope from late 2013. The pipeline package is a part of the IGRINS software and designed to be compatible with other package that maneuvers the spectrograph during the observation. This package provides high-quality spectra with minimal human intervention and the processes of order extraction, distortion correction, and wavelength calibration can be automatically carried out using the predefined functions (e.g. echellogram mapping and 2D transform). Since the IGRINS is a prototype of the Giant Magellan Telescope Near-Infrared Spectrometer (GMTNIRS), this pipeline will be extended to the GMTNIRS software.

• Information Systems Review
• /
• v.8 no.1
• /
• pp.241-263
• /
• 2006

Since 1995 many enterprises have introduced ERP to strengthen competitive power. However, enterprises that have introduced ERP for the first time have experienced various types of problems integrating them; to this day, there are only a few enterprises that have implemented ERP successfully. The main reason for the failures of successful ERP implementing is that enterprises frequently ignore and/or don't know how to systematically evaluate the construction process of ERP and busy finishing a phase without resolving problems before going on to the next phase. This research focused on the implementation process of ERP project to evaluate the process of ERP at each phase. As a result, we propose an evaluation model of ERP project as a tool to find critical problems at each phase and improve on how to resolve the problems found at each phase. This evaluation model makes it possible to introduce ERP successfully by presenting the basis of assessment which will be used by enterprises to minimize the trial and error of construction process of ERP.