• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.53-63
• /
• 1979

The knowlege of thermal properties of rough rice has become of greate importance to the analysis of heat and mass transfer phenomenon in rice drying and storage process. Some information is available on the thermal properties of rough rice in foreign countries but is not available for these properties in Korea. A fundamental study was made to determine the thermal conductivity and thermal diffusivity of rough rice with line source method and to select current and resistance suitable for these properties from investigating the effect of current and resistance of heating wire on the temperature rise. The result of this study may be summarized as follows ; 1. Even through the power per unit length of heating wires is about the same, the tendency of temperature rise showed a little difference among them , and the suitable range of it for thermal properties was found to be 3.56-5.37w/m. 2. the most desirable resistance and current of heating wire was 18.40 ohm/m, 0.44 amperes among three kinds of heating wires and currents, respectively. because it took 13 minutes or so for the heating wire to reach equilibrium temperature. 3. The thermal conductivity of rough rice was 0.120-0.130 w/m$ ^\circ C$. and thermal diffusivity of it was $5.8210 $\times10^{-8} -9.7529 $\times10^{-8} m^2 /s.$ 4.The thermal conductivity showed a little difference in variation with resistance of heating wire but the variation of current of heating wire at the same resistance did not affect the thermal conductivity , and the thermal diffusivity was not affected by the variation of resistance and current.

• 공업화학
• /
• 제27권2호
• /
• pp.210-216
• /
• 2016

본 연구에서는 무전해 니켈 도금 시간을 달리하여 제조한 자동차 시트용 탄소섬유 발열체의 발열 및 전기적 특성에 관하여 고찰하였다. 무전해 니켈 도금된 탄소섬유의 비저항 및 비열은 4-point probe method 및 differential scanning calorimetry (DSC)를 이용하여 분석하였으며, 표면 형상 및 표면 온도는 scanning electron microscope (SEM) 및 열화상 카메라를 이용하여 관찰하였다. 실험 결과, 도금시간의 증가에 따라 니켈 도금 두께 및 표면 온도는 증가하였으며, 반면에 비열 및 비저항은 도금시간이 증가함에 따라 감소하였다. 결과적으로 무전해 니켈 도금은 자동차 시트용 탄소섬유 발열체의 저항 발열 및 전기적 특성을 크게 향상시키는 것으로 판단된다.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.405-411
• /
• 2015

Carbon composites for flexible fiber heating element were examined to improve the electrical conductivity in this study. Carbon composites using carbon black, denka black, super-c, super-p with/without CNF or dispersant such as BCS03 and Sikament-nn were prepared. Carbon composite slurry was coated on plane film and yarns(cotton, polyester) and the performances of prepared heating materials were investigated by checking electrical surface resistance, adhesion strength. The plane heating element using carbon black under natural drying condition($25^{\circ}C$) had better physical properties such as surface resistance(185.3 Ohm/sq) and adhesion strength(above 90%) than those of other carbon composite heating elements. From these results, polyester heating element coated by carbon black showed better electrical line resistance(33.2 kOhm/cm) than cotton heating element. Then, it was found that polyester heating element coated by carbon black with CNF(3 wt%) and BCS03(1 wt%) appeared best properties(0.604 kOhm/cm).

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.114-116
• /
• 2003

The multi function sprayed coating is used for direct-heating, wear resistance and high bonding strength. The merits of surface direct-heating coatings are short warming time, low power consumption and better wear resistance that can be used in many organization parts. In this study, the surface direct-heating and wear resistance can be improved by spraying the proper materials on the surface $Al_2$O$_3$40%TiO$_2$ powder and Ni-20%Cr powder that had the properties of conduction and high wear resistivity are used in order to improve wear resistance, electrical properties and bonding strength.

• 한국정보전자통신기술학회논문지
• /
• 제12권3호
• /
• pp.218-223
• /
• 2019

높은 CVD 그래핀저항으로 인한 낮은 발열효과를 해결하기 위해 다층으로 그래핀을 적층하여, 저저항의 광학특성이 우수한 투명 면상 발열시스템을 구현하였다. 제작한 CVD 그래핀의 발열필름으로 $300{\times}400{\times}5mm$ 발열체를 제작하고, 효율적인 전력을 구동하기 위해 PWM 제어를 통한 회로를 구성하여 시스템을 구현하였다. 발열체로 사용한 4층의 CVD 그래핀 필름의 평균 면 저항 측정값은 $85.5{\Omega}/sq$이다. 따라서 저 저항의 CVD 그래핀의 구현 방법으로 열전사의 적층의 방법은 타당하다. 발열시험 결과, CVD 그래핀을 이용한 저저항 투명 면상 발열 시스템의 평균 발열상승은 $10^{\circ}C/min$ 이고, 86.44%의 CVD 그래핀 필름의 광투과율을 갖음을 보여준다. 따라서 제시한 발열 시스템은 대형창 유리 및 자동차 발열유리로서 적용가능하다.

• 한국기계가공학회지
• /
• 제21권3호
• /
• pp.1-11
• /
• 2022

In this study, an electric resistance dual-spot welding process using a copper electrode inserted in a heating electrode is suggested for the spot welding of AZ31 magnesium sheets. This spot-welding process involves two heating methods for welding at the interfacial zone between the magnesium sheets, one of which is the heating method by thermal conduction from the heating electrode heated by the welding current induced to the steel electrode, and the other heating method uses the electric resistance between the contacted surfaces of the two sheets by the welding current induced to the copper electrode. This welding process includes the welding variables, such as the current induced in the heating electrode and the copper electrode, and the outer diameters of the heating electrode. This is because the heat conducted from the heating electrode can be maintained at a higher temperature in the welding zone, which has a slow cooling effect on the nugget of the melted metal after the welding step. The pressure exerted during the pressing of the magnesium sheets by the heating electrode can be increased around the nugget zone at the spot-welding zone. Thus, it not only reduces the warping effect of the elastoplastic deformation of sheets, but also the corona bond can make it less prone to cracking at the welded zone, thereby reducing the number of nuggets expelled out of the corona bond. In conclusion, it was known that an electric resistance dual spot welding process using the copper electrode inserted in the heating electrode can improve the welding properties in the electric resistance spot welding process of AZ31 magnesium sheets.

• 한국결정성장학회지
• /
• 제12권6호
• /
• pp.288-291
• /
• 2002

We developed a new RF indirect-heating LPE furnace. The thermal gradient of our newly developed furnace is less than that of direct heating, and is as gentle as that of the resistance-heating LPE furnace. With this new furnace, the heating and/or cooling is faster than that of the resistance-heating furnace. Impurity-doped YIG film was grown from a $PbO-B_{2}O_{3}$, based flux on a (111) GGG substrate. To study the effect of the impurities on the MSSW threshold power and the saturation response time, we used two microstrip lines to excite and propagate the MSSW at 1.9 GHz. The MSSW threshold power and saturation response time was found to be related to the $\Delta$H.

• 한국결정성장학회지
• /
• 제30권6호
• /
• pp.258-263
• /
• 2020

고분자로부터 제조되는 탄화규소 섬유는 고온 내산화성, 인장강도, 그리고 경량성 때문에 세라믹 복합체의 강화재료로 주로 적용되고 있다. 본 연구에서 탄화규소 연속섬유는 유연한 로프 형태의 고온 발열체(> 650℃)로 제조하기 위해 사용되었다. 특히, 탄화규소 섬유 발열체는 고효율의 저항 발열을 위해 단면적과 길이에 대한 저항 변화를 2-point probe 방법으로 측정하고, 비정질 탄화규소 섬유에 존재하는 산소 불순물과 결정립의 크기 제어를 통해 로프형 섬유 발열체의 저항 값을 최적화하였다. 그 결과, 약 100~200 Ω의 저항 범위를 가지는 탄화규소 섬유 발열체는 탄소 섬유 발열체보다 1.5배의 우수한 소비전력 효율을 가졌다.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.101-107
• /
• 2008

This study investigated fundamental characters of the concrete according to various fiber types and contents and their properties of spatting resistance and residual compressive strength after fire test corresponding to ISO and RABT heating corves. The results were summarized as following. The Flowability was gradually declined as the increase of fiber contents, and it was the most favorable with nylon(NY) fibers. The decrease of air contents due to increasing fiber contents was in order by polypropylene(PP), polyvinyl alcohol(PVA) and NY fibers. The compressive strengths were over 40 MPa at 7 days and 50 MPa at 28 days. It was in order by PVA, PP and NY fibers. For the spatting properties, all specimens were prevented at ISO heating curve. In the other hand, the partial spatting at the surface occurred on the plain without fibers, but it was prevented over 0.10 % of PVA and 0.05 % of PP and NY fibers at the RABT heating curve.

• 한국세라믹학회지
• /
• 제29권1호
• /
• pp.35-40
• /
• 1992

Porous glass in the ZrO2-SiO2 system containing up to 30 mol% zirconia were prepared from the mixed solutions of Zr(O.nC3H7)4 and partially prehydrolyzed TEOS by the sol-gel method. Pore characteristics, physical properties and alkali resistance were investigated. The gels converted into the porous glass by heating at $700^{\circ}C$, it was found that the glass like skeleton was already made up in lower temperature regions. The specific surface area of the porous glass was 227 $m^2$/g, average mean pore size was about 19$\AA$ and porosity was 19.2%, pore characteristics and physical properties depended on heating temperature. Alkali resistance of the porous glass increased as the zirconia content increased, because of the appearance of Zr-enriched layer at glass surface.