• Journal of Microbiology
• /
• v.35 no.3
• /
• pp.177-180
• /
• 1997

The purpose of this study was to evaluate the efficiency of Line Probe Assay (LiPA) in detecting the rpoB gene mutation of clinically isolated Mycobacterium tuberculosis (MTB) and to compare the level of resistance to the various rifamycins with their mutation sites. The mutation in the rpoB gene was found in 84 (97.6%) out of 86 rifampicin (RMP) resistant strains as determined by LiPA. No mutation was observed in 2 RMP resistant strains and in any of 38 RMP susceptible strains tested. Only one of 3 strains with .DELTA.5/R5, one of 2 strains with .DELTA.3, and one of 3 strains with .DELTA.2/R2 LiPA profile showed a slightly lower level of resistance to the rifapentine than the other strains. Although we could not find correlations between mutation sites in the rpoB gene and the level of susceptibility to the various rifamycins, the LiPA is recommended as a fast screening tool for detection of RMP resistant MTB.

• Korean Journal of Materials Research
• /
• v.29 no.5
• /
• pp.297-303
• /
• 2019

A triple-layered $PMMA/Ni_{64}Zr_{36}/PDMS$ hydrogen gas sensor using hydrogen permeable alloy and flexible polymer layers is fabricated through spin coating and DC-magnetron sputtering. PDMS(polydimethylsiloxane) is used as a flexible substrate and PMMA(polymethylmethacrylate) thin film is deposited onto the $Ni_{64}Zr_{36}$ alloy layer to give a high hydrogen-selectivity to the sensor. The measured hydrogen sensing ability and response time of the fabricated sensor at high hydrogen concentration of 99.9 % show a 20 % change in electrical resistance, which is superior to conventional Pd-based hydrogen sensors, which are difficult to use in high hydrogen concentration environments. At a hydrogen concentration of 5 %, the resistance of electricity is about 1.4 %, which is an electrical resistance similar to that of the $Pd_{77}Ag_{23}$ sensor. Despite using low cost $Ni_{64}Zr_{36}$ alloy as the main sensing element, performance similar to that of existing Pd sensors is obtained in a highly concentrated hydrogen atmosphere. By improving the sensitivity of the hydrogen detection through optimization including of the thickness of each layer and the composition of Ni-Zr alloy thin film, the proposed Ni-Zr-based hydrogen sensor can replace Pd-based hydrogen sensors.

• Journal of Korean Dental Science
• /
• v.16 no.1
• /
• pp.35-46
• /
• 2023

Purpose: Culture-based methods for microbiological diagnosis and antibiotic susceptibility tests have limitations in the management of orofacial infections. We aimed to profile pus microbiota and identify antibiotic resistance genes (ARGs) using a culture-independent approach. Materials and Methods: Genomic DNA samples extracted from the pus specimens of two patients with orofacial abscesses were subjected to shotgun sequencing on the NovaSeq system. Taxonomic profiling and prediction of ARGs were performed directly from the metagenomic raw reads. Result: Taxonomic profiling revealed obligate anaerobic polymicrobial communities associated with infections of odontogenic origins: the microbial community of Patient 1 consisted of one predominant species (Prevotella oris 74.6%) with 27 minor species, while the sample from Patient 2 contained 3 abundant species (Porphyromonas endodontalis 33.0%; P. oris 31.6%; and Prevotella koreensis 13.4%) with five minor species. A total of 150 and 136 putative ARGs were predicted in the metagenome of each pus sample. The coverage of most predicted ARGs was less than 10%, and only the CfxA2 gene identified in Patient 1 was covered 100%. ARG analysis of the seven assembled genome/metagenome datasets of P. oris revealed that strain C735 carried the CfxA2 gene. Conclusion: A metagenomics-based approach is useful to profile predominantly anaerobic polymicrobial communities but needs further verification for reliable ARG detection.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.3
• /
• pp.277-287
• /
• 2023

Since the first discovery of antibiotics, introduction of new antibiotics has been coupled with the occurrence of antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs). Rapid dissemination of ARB and ARGs in the aquatic environments has become a global concern. ARB and ARGs have been already disseminated in the aquatic environments via various routes. Main hosts of most of ARGs were found to belong to Gammaproteobacteria class, including clinically important potential pathogens. Transmission of ARGs also occurs by horizontal gene transfer (HGT) mechanisms between bacterial strains in the aquatic environments, resulting in ubiquity of ARGs. Thus, a few of ARGs and MGEs (e.g., strA, sul1, int1) have been suggested as indicators for global comparability of contamination level in the aquatic environments. With ARB and ARGs contamination, the occurrence of critical pathogens has been globally issued due to their widespread in the aquatic environments. Thus, active surveillance systems have been launched worldwide. In this review, we described advancement of methodologies for ARGs detection, and occurrence of ARB and ARGs and their dissemination in the aquatic environments. Even though numerous studies have been conducted for ARB and ARGs, there is still no clear strategy to tackle antibiotic resistance (AR) in the aquatic environments. At least, for consistent surveillance, a strict framework should be established for further research in the aquatic environments.

• The Plant Pathology Journal
• /
• v.39 no.6
• /
• pp.614-624
• /
• 2023

Botrytis cinerea is a major fungal plant pathogen that causes gray mold disease in strawberries, leading to a decrease in strawberry yield. While benzimidazole is widely used as a fungicide for controlling this disease, the increasing prevalence of resistant populations to this fungicide undermines its effectiveness. To investigate benzimidazole resistant B. cinerea in South Korea, 78 strains were isolated from strawberries grown in 78 different farms in 2022, and their EC₅₀ values for benzimidazole were examined. As a result, 64 strains exhibited resistance to benzimidazole, and experimental tests using detached strawberry leaves and the plants in a greenhouse confirmed the reduced efficacy of benzimidazole to control these strains. The benzimidazole resistant strains identified in this study possessed two types of mutations, E198A or E198V, in the TUB2 gene. To detect these mutations, TaqMan probes were designed, enabling rapid identification of benzimidazole resistant B. cinerea in strawberry and tomato farms. This study utilizes TaqMan real-time polymerase chain reaction analysis to swiftly identify benzimidazole resistant B. cinerea, thereby offering the possibility of effective disease management by identifying optimum locations and time of application.

• Applied Biological Chemistry
• /
• v.45 no.4
• /
• pp.185-189
• /
• 2002

Along with the worldwide rapid increase of the cultivation area and commercial production of genetically modified (GM) crops, the amount of GM grains imported to Korea has also been increasing. Roundup-Ready soybean (RRS) was introduced with 5-enolpyruvyl shikimate-3-photphate synthase (EPSPS) gene derived from Agrobacterium CP4 to confer the resistance to herbicide, glyphosate. In this study, we tried to develop PCR-based analytical method to detection the presence of RRS among non-GM soybeans. In order to detect RRS specifically, oligonucleotide primers were specifically designed based on the nucleotide sequence of EPSPS transgene. Qualitative PCR method was established and its specificity and accuracy were confirmed by analysing the nucleotide sequence of PCR DNA fragments. Bioassay was also conducted by spraying glyphosate at seedling stage. Survived individuals showed obvious resistance to Roundup Ready, however all of non-GM seedlings died in two weeks after spray. Conclusively, the highly selective detection systems for RRS were successfully established by both PCR using specific primers to EPSPS transgene and bioassay using the herbicide resistance of RRS. In addition to, the imported soybean showed to be mixed to several varieties regarding to 100-seed weight and hilum color.

• Composites Research
• /
• v.34 no.5
• /
• pp.317-322
• /
• 2021

When a complex load such as torsion, low-speed impact, or fatigue load is applied, the properties in the thickness direction are weakened through microcracks inside the material due to the nature of the laminated composite material, and delamination occurs. To prevent the interlaminar delamination, various three-dimensional reinforcement methods such as Z-pinning and stitching, and structural health monitoring techniques that detect the microcrack of structures in real time have been continuously studied. In this paper, the single-lap joints with I-fiber stitching process were manufactured by a co-curing method and their strengths and failure detection capability were evaluated. AE and electric resistance method were used for detection of crack and failure signal and electric circuit for signal analysis was manufactured, and failure signal was analyzed during the tensile test of a single-lap joint. From the experiment, the strength of the single lap joint reinforced by I-fiber stitching process was improved by about 44.6% compared to the co-cured single lap joint without reinforcement. In addition, as the single-lap joint reinforced by I-fiber stitching process can detect failure in both the electrical resistance method and the AE method, it has been proven to be an effective structure for failure monitoring as well as strength improvement.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.207-213
• /
• 2019

The fuel-cut coast-down driving mode is activated when the acceleration pedal is released with transmission gear engaged, and it's a default function for electronic-controlled engine of vehicles. The fuel economy becomes better because fuel injection stops during fuel-cut driving mode. A fuel-cut detection method is suggested in the study and it's based on the speed, acceleration and road gradient data from GPS sensor. It detects fuel-cut driving mode by comparing calculated acceleration and realtime acceleration value. The one is estimated with driving resistance in the condition of fuel-cut driving and the other is from GPS sensor. The detection accuracy is about 80% when the method is verified with road driving data. The result is estimated with 9,600 data set of vehicle speed, acceleration, fuel consumption and road gradient from test driving on the road of 12km during 16 minutes, and the road slope is rather high. It's easy to detect fuel-cut without injector signal obtained by connecting wire. The detection error is from the fact that the variation range of speed, acceleration and road gradient data, used for road resistance force, is larger than the value of fuel consumption data.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.5
• /
• pp.377-383
• /
• 2014

An addressable conducting network (ACN) makes it possible to monitor the condition of a structure using the electrical resistance between electrodes on the surface of a carbon fiber reinforced plastics (CFRP) structure. To improve the damage detection reliability of the ACN, the contact resistances between the electrodes and CFRP laminates needs to be minimized. In this study, silver nanoparticle electrodes were fabricated via printed electronics techniques on a CFRP composite. The contact resistance between the silver electrodes and CFRP were measured with respect to various fabrication conditions such as the sintering temperature of the silver nano-ink and the surface roughness of the CFRP laminates. The interfaces between the silver electrode and carbon fibers were observed using a scanning electron microscope (SEM). Based on this study, it was found that the lowest contact resistance of $0.3664{\Omega}$ could be achieved when the sintering temperature of the silver nano-ink and surface roughness were $120^{\circ}C$ and 0.230 a, respectively.

• Korean Journal of Veterinary Service
• /
• v.40 no.2
• /
• pp.101-105
• /
• 2017

The purpose of this study was to investigate prevalence and antimicrobial resistance patterns of Campylobacter spp. from duck feces in northern area of the Gyeongnam province, Korea. Samples of 121 duck feces were taken from April to December 2014 for this survey. Samples were examined by bacteria isolation and reverse transcriptase-polymerase chain reaction assay for detection of Campylobacter spp. Campylobacter were isolated in 37 samples (30.6%). Among these samples, C. jejuni and C. coli were isolated in 35 samples and 2 samples, respectively. Minimum inhibitory concentration (MIC) test is performed to investigate antimicrobial resistance patterns of Campylobacter spp. C. jejuni were resistant to ciprofloxacin (85.7%), nalidixic acid(82.9%), tetracycline (77.1%), gentamicin (57.1%), azithromycin (40.0%), clindamycin (34.3%), erythromycin (22.9%), and florfenicol (8.6%). These data support a database of pollution and antimicrobial resistance of Campylobacter spp. from duck feces and provide a basic information of reducing the secondary damage of antibiotic misuse.