• Title/Summary/Keyword: resistance change

Search Result 2,429, Processing Time 0.028 seconds

Effects of Uwhangchungsimwon(牛黃淸心元) on Cerebral Blood Flow and Systemic Blood Pressure in Humans (우황청심원이 정상인의 뇌혈류 및 혈압에 미치는 영향)

  • Kim, Young-Suk
    • The Journal of Internal Korean Medicine
    • /
    • v.20 no.1
    • /
    • pp.222-231
    • /
    • 1999
  • Uwhangchungsimwon(UC) has been used in the treatment of a wide variety of conditions including stroke, hypertension, arteriosclerosis, autonomic imbalance, mental instablity, etc in Korean traditional hospitals, In particular it is often initialy chosen for emergency care of acute stroke. The aim of this study was to evaluate the effect of UC on cerebral hemodynamics. Using transcranial Doppler ultrasound, we studied changes of mean flow velocity and pulsatility index(PI) of middle cerebral arteries (MCAs) from 11 health young volunteers who were administrated with 1 pill UC and 11 health controls who were not. We obtained hypercapnia with breath-holding and evaluated cerebrovascular reactivity with breath-holding index(BHI). Systolic blood pressure, diastolic blood pressure, and heart rate were measured using ambulatory blood pressure monitoring(ABPM). In UC administration group, the evaluation was performed during basal condition. and repeated at 20, 40, and 60 min after administration. In controls, the evaluation was performed at corresponding time intervals. Mean flow velocity in middle cerebral artery, systolic blood pressure, diastolic blood pressure, and heart rate did not change during the observation period and were not different between these two groups. However, administration of UC was associated with decreases in PI by $3.6{\sim}12.4%$ in BHI by $17.9{\sim}24.8%$ compared with pre-administration period. Decreases in PI and BHI with UC were significantly different compared with control group (p<0.05). These results indicate that UC decreases PI and BHI in cerebral artery, which is due to a dilation of cerebral resistance vessels.

  • PDF

Effect of Farnesyltransferase Inhibitor R115777 on Mitochondria of Plasmodium falciparum

  • Ha, Young Ran;Hwang, Bae-Geun;Hong, Yeonchul;Yang, Hye-Won;Lee, Sang Joon
    • Parasites, Hosts and Diseases
    • /
    • v.53 no.4
    • /
    • pp.421-430
    • /
    • 2015
  • The parasite Plasmodium falciparum causes severe malaria and is the most dangerous to humans. However, it exhibits resistance to their drugs. Farnesyltransferase has been identified in pathogenic protozoa of the genera Plasmodium and the target of farnesyltransferase includes Ras family. Therefore, the inhibition of farnesyltransferase has been suggested as a new strategy for the treatment of malaria. However, the exact functional mechanism of this agent is still unknown. In addition, the effect of farnesyltransferase inhibitor (FTIs) on mitochondrial level of malaria parasites is not fully understood. In this study, therefore, the effect of a FTI R115777 on the function of mitochondria of P. falciparum was investigated experimentally. As a result, FTI R115777 was found to suppress the infection rate of malaria parasites under in vitro condition. It also reduces the copy number of mtDNA-encoded cytochrome c oxidase III. In addition, the mitochondrial membrane potential (${\Delta}{\Psi}m$) and the green fluorescence intensity of MitoTracker were decreased by FTI R115777. Chloroquine and atovaquone were measured by the mtDNA copy number as mitochondrial non-specific or specific inhibitor, respectively. Chloroquine did not affect the copy number of mtDNA-encoded cytochrome c oxidase III, while atovaquone induced to change the mtDNA copy number. These results suggest that FTI R115777 has strong influence on the mitochondrial function of P. falciparum. It may have therapeutic potential for malaria by targeting the mitochondria of parasites.

Stimulation of Insulin Secretion by Silk Fibroin Hydrolysate in Streptozotocin-induced Diabetic Rats and db/db Mice (Streptozotocin 당뇨유발 쥐와 db/db 마우스에서의 피브로인 가수분해물에 의한 인슐린 분비 촉진)

  • Park, Kum-Ju;Hong, Seong-Eui;Do, Myoung-Sool;Hyun, Chang-Kee
    • Korean Journal of Pharmacognosy
    • /
    • v.33 no.1 s.128
    • /
    • pp.21-28
    • /
    • 2002
  • Antidiabetic effects of the acid hydrolysate of silk fibroin were investigated by oral administration to animal models for diabetes mellitus, Fibroin protein was extracted from cocoon and digested to peptides of low-molecular weight range (mainly below 3,000) and amino acids by acid hydrolysis, Feeding of the fibroin hydrolysate resulted in a significant recovering effect on reduction of body weight gain and a lowering effect on blood glucose gain in streptozotocin-induced diabetic Sprague Dawley rats (STZ rats) which were used as an insulin-dependent diabetic animal model. But the body weight and blood glucose level in C57BL/KsJ-db/db mice (db/db mice), an non-insulin-dependent diabetic animal model, were not changed significantly by the feeding, On the other hand, plasma leptin levels increased according to increased feeding amount of the hydrolysate in STZ rats and db/db mice in common, It was concluded from the results that the fibroin hydrolysate might stimulate the insulin secretion by recovering or activating pancreatic ${\beta}$ cells and result in the increased plasma leptin level. It was also deduced that the antidiabetic improvements in body weight and blood glucose gain in STZ were thought to be due to the increased insulin secretion, but in db/db mice of which the diabetic symptoms were caused by insulin resistance, the stimulated secretion of insulin was unlikely to be able to change body weight and blood glucose level significantly.

Preliminery study of waveform control in ERW process (전기저항용접의 파형제어에 관한 기초연구)

  • Cho, Min-Hyun;Kim, Dong-Chul;Kang, Mun-Jin;Eun, Seung-Soo
    • Proceedings of the KWS Conference
    • /
    • 2009.11a
    • /
    • pp.32-32
    • /
    • 2009
  • Electric Resistance Welding (ERW) process is the most efficient process to manufacture the linepipe. To develop the high performance ERW linepipe using the high strength and the high alloy steels, the modulation of input power waveform such as sinusoidal waveform is introduced because the conventional ERW technology is not sufficient enough to produce the high quality linepipe due to its strength and high alloy contents (high Ceq). In this article, the material used for the experiment was API X60 with 8.2mm thickness, and ERW simulator at POSCO was used to develop a waveform control system for the power modulation. The frequency of power modulation was varied from 50Hz to 150Hz with the fixed amplitude of ${\pm}2%$ power. The non-modulated power input and the modulated power input cases are conducted to demonstrate the variation of the narrow gap length and the arcing frequency due to power modulation. From results of the non-modulated power input case, the excessive power causes the longer narrow gap length and the low arcing frequency due to the large heat input and the strong electro magnetic force that increase the weld defect. On the contrary, the small narrow gap length and the high arcing frequency reduce the weld defect. After modulating the power input with 50Hz and 100Hz at the fixed power, the arcing frequency increases, but the narrow gap length does not change much. The high arcing frequency prevents the formation of weld defect because the sweeping frequently cleans the oxides on the narrow gap edges. As a result, the manufacturing window can be expanded by the power modulation that provides the stable ERW process for the quality improvement of the linepipe made from the high strength/high alloy steels.

  • PDF

Effects of Serrated Grain Boundary Structures on Boron Enrichment and Liquation Cracking Behavior in the Simulated Weld Heat-Affected Zone of a Ni-Based Superalloy (니켈기 초내열합금의 파형 결정립계 구조가 보론 편석과 재현 열영향부 액화균열거동에 미치는 영향)

  • Hong, Hyun-Uk;Choi, June-Woo;Bae, Sang-Hyun;Yoon, Joong-Geun;Kim, In-Soo;Choi, Baig-Gyu;Kim, Dong-Jin;Jo, Chang-Yong
    • Journal of Welding and Joining
    • /
    • v.31 no.3
    • /
    • pp.31-38
    • /
    • 2013
  • The transition of serrated grain boundary and its effect on liquation behavior in the simulated weld heat-affected zone (HAZ) have been investigated in a wrought Ni-based superalloy Alloy 263. Recently, the present authors have found that grain boundary serration occurs in the absence of adjacent coarse ${\gamma}^{\prime}$ particles or $M_{23}C_6$ carbides when a specimen is direct-aged with a combination of slow cooling from solution treatment temperature to aging temperature. The present study was initiated to determine the interdependence of the serration and HAZ property with a consideration of this serration as a potential for the use of a hot-cracking resistant microstructure. A crystallographic study indicated that the serration led to a change in grain boundary character as special boundary with a lower interfacial energy as those terminated by low-index {111} boundary planes. It was found that the serrated grain boundaries are highly resistant to boron enrichment, and suppress effectively grain coarsening in HAZ. Furthermore, the serrated grain boundaries showed a higher resistance to susceptibility of liquation cracking. These results was discussed in terms of a significant decrease in interfacial energy of grain boundary by the serration.

Evaluation of the Effect of Fracture Resistance Curve Change Owing to the Presence or Absence of Side Groove in C(T) Specimen on Finite Element Failure Model Parameter Determination (C(T) 시편 측면 홈 유무에 따른 파괴저항곡선 변화가 유한요소 손상모델 변수 결정에 미치는 영향 평가)

  • Kim, Hune-Tae;Ryu, Ho-Wan;Kim, Yun-Jae;Kim, Jong-Sung;Choi, Myung-Rak;Kim, Jin-Weon
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.40 no.6
    • /
    • pp.539-546
    • /
    • 2016
  • In this paper, the effect of J-R curve changes on the determination of parameters in a failure model owing to the presence or absence of a side groove in a C(T) specimen is investigated. A stress-modified fracture strain model is implemented for FE damage simulations. C(T) specimens were taken from SA508 grade 1a low-alloy steel piping material, and some of them were processed with a side groove. Fracture toughness tests were performed at room temperature and at $316^{\circ}C$. The parameters of the failure model were determined by damage simulations using the J-R curves obtained from the tests. Finally, the results show that the determination of failure model parameters is not affected by variations in J-R curves owing to the presence or absence of a side groove.

Studies on the Durable Softners (II) -Applications of Alkyl Imidazoline Derivatives as the Durable Softners- (내구성유연제에 관한 연구 (II) -알킬이미다졸린 유도체의 내구성유연제로서의 응용-)

  • Kim, Young-Geun;Park, Hong-Soo;Song, Kab Jun
    • Applied Chemistry for Engineering
    • /
    • v.1 no.2
    • /
    • pp.168-175
    • /
    • 1990
  • Softners-BHICS, BBICS, and BTICS were prepared from 1, 2-disubstituted imidazoline compounds, such as 1-behenoylaminoethyl-1-glycidyl-2-heneicosylimidazolinium chloride(BHIC), 1-behenoylbis(aminoethyl)-1-glycidyl-2-heneicosylimidazolinium chloride (BBIC), and 1-behenoyltris(aminoethyl)-1-glycidyl-2-heneicosylimidazolinium chloride(BTIC), and treated to acrylic fiber. The measurements of softness, lubricating and antistatic properties showed that they have not only good softness and lubricating property but also a little antistatic property. Furthermore, the initial bending resistance for BBICS and BTICS was 5 grade, and remained 3~4 grade after 5 times washing. As results of these tests, they showed good softner effects having durability. The prepared softners were proved to be durable softner through a series of experimental results for washable properties of feeling by varying treating temperature and pH change.

  • PDF

The Effects of Skeletal Muscle Mass and Muscle Fatigue on the Proprioceptive Position Sense of the Knee Joint (뼈대근육량과 근피로가 무릎관절 고유수용성 위치감각에 미치는 영향)

  • Park, Sookyoung;Park, Kanghui
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.8 no.2
    • /
    • pp.139-147
    • /
    • 2020
  • Purpose : Proprioceptive position sense plays a key role in providing joint stability, and multiple factors are related to proprioceptive position sense. Thus, this study aimed to determine the effects of body composition, particularly skeletal muscle mass on proprioceptive position sense following muscle fatigue. Methods : Healthy female subjects agreed to have their body composition analyzed. Only subjects who had 18.5-22.9 kg/㎡ of BMI (body mass index) were included in this study, and the participants were divided into two groups by skeletal muscle mass level. The experimental group had a level of skeletal muscle lower than the standard level (n=9), while the control group showed a standard or high level of skeletal muscle mass (n=11). To determine the change in proprioceptive position sense of the knee joint, the absolute angle error (AAE) was evaluated following muscle fatigue on low extremity. The muscle fatigue was induced by isokinetic resistance exercise program of Biodex system. AAE was measured by the Biodex system and compared the result before and after muscle fatigue. Results : The experimental group showed a significant AAE difference between before (3.16±2.48 °) and after (5.40±2.61 °) muscle fatigue. In addition, there was a AAE difference between the experimental (5.40±2.61 °) and control groups (3.53±1.67 °) after fatigue; however, there was no significance. Those results indicated that low level of skeletal muscle mass might influence the proprioceptive position sense of the knee joint after muscle fatigue. Conclusion : Thus, maintaining the proper level of skeletal muscle mass is pivotal to reduce the risk of injury following muscle fatigue in ADL or sport activities.

Study on the Cathodic Protection Characteristics of Hot Water Boiler by Mg-Alloy Galvanic Anode(1) (Mg 합금 유전양극에 의한 온수Boiler의 음극방식특성에 관한 연구(1))

  • 임우조;윤병두
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.37 no.2
    • /
    • pp.147-152
    • /
    • 2001
  • Corrosion damage of boiler, factory equipment and so forth occur quickly due to using of the polluted water, resulting in increasing leak accident. Especially, working life of hot water boiler using the polluted water becomes more short, and energy loss increases. The cathodic protection method is the most economical and reliable one to prevent corrosion damage of steel structures. Mg-base alloys galvanic anode protection of cathodic protection methode is suitable for the application of hot water boiler using water with high specific resistance such as tap water. This paper is studied on the cathodic protection characteristics of hot water boiler. In tap water solution, the measurement of cathodic protection potential according to the time elapsed is carried out, and behavior of cathodic polarization with current change is investigated. The main results obtained are as follows. In hot water boiler shell, the open circuit potential of base metal become less noble than that of weld Bone, and the current density of base metal becomes low than that of weld zone. The further distance from Mg-alloy galvanic anode, the higher cathodic protection potential of hot water boiler appears. And protective potential becomes high according to pass cathodic protection time and after 6∼10 days become stable.

  • PDF

Modulation of Cellular Immune Response by Inosiplex (Inosiplex에 의한 세포성 면역반응의 변화)

  • Lee, Hern-Ku;Lee, Jeong-Ho;Kim, Hak-Kun;Ha, Tai-You
    • The Journal of the Korean Society for Microbiology
    • /
    • v.21 no.2
    • /
    • pp.251-259
    • /
    • 1986
  • This study was performed to assess the effect of inosiplex(ISP) on the resistance of mice Candida albicans infection, the migration of chicken leukocytes, the production of leukocyte migration inhibitory factor(LIF), and the cell-mediated immunity(CMI) to lepomin in multibacillary lepromatous leprosy patients. The treatment with ISP before or on the time of infection with C. albicans had no or deliterious effect, and treatment with ISP after infection had no effect on the recovery of C. albicans from the kidneys of mice. The migratory ability of chicken leukocytes and the production of LIF from splenocytes of mice were not affected by ISP treatment. However, ISP decreased the migration of chicken leukocytes in vitro, and this decrease was dose-dependent. The therapy of lepromatous leprosy patients with ISP for 10 or 30 days clearly showed the increase of the significant positive rate of Mitsuda skin test to lepromin. The immune recovery as a result of the therapy was found to be the best in the group of patients treated for 30 days. This results suggest that (1) the effect of ISP in renal candidiasis can vary depending on the time of treatment relative to infection, (2) ISP can primarily change the migratory ability of chicken leukocytes but does not affect the production of LIF in mice, and (3) the classical therapy combined with ISP can reinforce or restore the defences of lepromatous leprosy patients against Mycobacterium leprae.

  • PDF