• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.443-451
• /
• 2008

The purpose of this study was to evaluate the effect of additional etching procedure prior to Maxcem resin cement application in indirect restoration cementation using push-out bonding strength. One hundred and two extracted human molars were used to make indirect resin restorations of gold inlay and Synfony. These restorations were cemented using Maxcem and Variolink II. Additional etching procedures were done for one group with Maxcem. Three groups have 17 specimens in both restoration types. Push-out bond strength was measured using multi-purpose tester and calculated for bonding strength per sqaure-millimeter area. The mean bonding strength values were compared using SPSS 12.0K program for one-way ANOVA and Scheffe's Test with 95% significance. Under the condition of this study, the additional etching procedure prior to usage of Maxcem resulted in reduced bond strength for both of restoration types.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.2
• /
• pp.158-164
• /
• 2019

The purpose of this study was to compare the bond strength of resin-modified glass ionomer (RMGI) to dentin with saliva contamination at different stages and using different decontamination procedures. Extracted human permanent molars were embedded onto acrylic resin with the dentin surface exposed. Group I was a control group that was conditioned with polyacrylic acid (PAA). Groups II and III were contaminated with saliva before PAA conditioning and Groups IV, V, and VI were contaminated with saliva after PAA conditioning. After saliva contamination, Groups II and IV were dried, Groups III and V were rinsed and dried, and Group VI was additionally conditioned with PAA. After surface treatment, the dentin specimens were filled with RMGI. Group I showed significantly higher bond strength than the other groups. Group VI showed a significantly higher bond strength than the other saliva contaminated groups. However, there were no significant differences in the failure mode between the different groups. Saliva contamination impaired the bond strength of RMGI to dentin, regardless of when the saliva contamination occurred. Decontamination with washing and drying could not improve the shear bond strength of RMGIC. When saliva contamination occurred after PAA conditioning, additional PAA conditioning improved the shear bond strength.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.837-843
• /
• 1997

In oxidized polyethylene wax preparation, the effects of main parameters such as the property of used wax, oxidation time, oxidation temperature, air feed rates on the change of acid-numbers were investigated. The change in polymer property was also investigated. The results showed under given reaction conditions, the acid numbers with oxidation temperature increased upto $160^{\circ}C$, but at higher temperature, it decreased. The base resin which was lower molecular weight had higher acid number. The result showed molecular weight as a experimental parameter was more effective than density in oxidation experiment. In milder condition, free radical initiator was used for catalyst to get higher acid-numbers, which was successful in comparison to the non-catalyst system. Also the catalyst with longer half-life was efficient, in order of DCPO, HOPO and BPO.

• Analytical Science and Technology
• /
• v.14 no.1
• /
• pp.72-79
• /
• 2001

Oxidative decomposition of 2, 4, 6-trichlorophenol(TCP) was studied in aqueous solution. Iron and manganese protoporphyrin [or tetrakis(p-carboxyphenylporphyrin)] and their polymer supported derivatives were used as catalysts, and $KHSO_5$ and tert-butyldroperoxide(TBHP) as oxidants. Metalloporphyrin itself shows very poor catalytic activity in oxidative decomposition of TCP with oxidant. However, very high catalytic activity was observed when metalloporphyrin was chemically bound to newly synthesized polymers or XAD2 resin. Additionally, it revealed much higher catalytic activity in the presence of water-soluble polymers having a electron-donating axial ligand such as pyridine and immidazole. Maleic acid and chloromaleic acid were found in the resulting solution by ESI-MS. Especially, XAD2-supported metalloporphyrins can be reused as catalysts due to insolubility to solvent, and stability against oxidant.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.2
• /
• pp.383-391
• /
• 2008

The glycans linked to the insect cell-derived glycoproteins are known to differ from those expressed in mammalian cells, partly because of the low level or lack of glycosyltransferase activities. GnT II, GnT IV, GnT V, and ST3Gal IV, which play important roles in the synthesis of tetraantennarytype complex glycan structures in mammalian cells, were overexpressed in Trichoplusia ni cells by using a baculovirus expression vector. The glycosyltransferases, expressed as a fusion form with the IgG-binding domain, were secreted into the culture media and purified using IgG sepharose resin. The enzyme assay, performed using a pyridylaminated-sugar chain as an acceptor, indicated that the purified glycosyltransferases retained their enzyme activities. Human erythropoietin expressed in T. ni cells (rhEPO) was subjected to in vitro glycosylation by using recombinant glycosyltransferases and was converted into complex-type glycan with terminal sialic acid. The presence of Nacetylglucosamine, galactose, and sialic acid on the rhEPO moiety was detected by a lectin blot analysis, and the addition of galactose and sialic acid to rhEPO was confirmed by autoradiography using $UDP-^{14}C-Gal\;and\;CMP-^{14}C-Sia$ as donors. The in vitro glycosylated rhEPO was injected into mice, and the number of reticulocytes among the ed blood cells was counted using FACS. A significant increase in the number of reticulocytes was not observed in the mice injected with in vitro glycosylated rhEPO as compared with those injected with rhEPO.

• Microbiology and Biotechnology Letters
• /
• v.20 no.3
• /
• pp.335-343
• /
• 1992

A Streptomyces strain No. 182-27, which produced amino acid antimetabolite, was isolated from soil. During the course of screening for new amino acid antimetabolites from the culture broths of Actinomycetes, we found that the strain produced a substance active against Gram-positive bacteria and its activity was reversed by L-Ieucine on the synthetic minimal agar medium in the culture broth. The morphological and cultural characteristics serve to identify the producing organism strain 182-27 as the Streptomyces, although the species of this strain should be resolved in further studies. Fermentation was carried out in the synthetic medium at $28^{\circ}C$ for 78 hours. The fermentation yield reached about 2 mg per liter of the broth. Purification was done by ion exchange resin, active carbon, silica gel column chromatography and obtained 20 mg of pure active substance from the 20 $\ell$ culture broth. The 182-27 substance was obtained as white powder, mp 18SoC. From the physicochemical characteristics of the substance, it was amino acid like substance but unknown about its chemical structure. It is active against some Gram-positive bacteria and reversed by L-Ieucine.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.6
• /
• pp.278-285
• /
• 2006

Coating mixtures of the resin B-H for the application to the desulfurization system of power plant were coated on carbon steels and cured at the temperature of $65^{\circ}C{\sim}80^{\circ}C$. After being contacted with 70wt% $H_2SO_4$ solution of $100^{\circ}C\;and\;120^{\circ}C$ for several hours, their composition, Vicker's hardness and microstructures by SEM were examined. Corrosion resistance of the coating mixtures to $H_2SO_4$ solution was related to the content of $SO_3$ in the coated specimens after corrosion test. The lower curing temperature and the shorter curing time the coated specimens went through, the higher corrosion resistance to acid they showed, but the more cracks were developed at higher temperature. It was realized that the corrosion resistance to sulfaric acid solution was increased on the condition of curing temperature above $65^{\circ}C$ and curing time above 12 hours at least.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.245-252
• /
• 2003

There have been many kinds of hair styling sprays with various setting effects. Consumers have used strong setting effect hair sprays to get a long lasting hold. In recent years, however, more and more consumers have come to prefer a "soft ＆ natural" touch feeling, keeping the same long lasting hold. Nonetheless, the existing approaches to this feature could not respond to the consumers′ needs, since products lose the hold strength if the soft feeling is pursued, and vice versa. We have researched and developed a new products to attain a compatible feature with both long lasting hold and natural feeling. Then, we have developed a new multifunctional hair styling material "Poly Amino Acid Derivative (PAAD)." We have focused on the PAAD′s feature that highly diffuses onto a hair and makes thin and even layer on a hair, and have made trials and errors to improve holding strength. "P AAD" excellently makes hair memorize its curl shape which is as the same effect as existing ordinary acrylic resin. Further more, it leaves a soft and natural touch feeling on the hair. We have accomplished a new Poly Amino Acid Derivative with ambivalent features, "soft ＆ natural finish" and "long lasting hold ", and now we report about it.

• The Korea Journal of Herbology
• /
• v.38 no.2
• /
• pp.27-34
• /
• 2023

Objectives : Currently, the benign prostatic hyperplasia (BPH) is one of the most common urogenital disorder in old men. We were performed to determine the effects of abietic acid (AC), component of pine resin, in benign prostatic hyperplastic Sprague-Dawley rat (SD rat) induced by testosterone injection (IP). Methods : We monitored body weights in SD rat at start and end date of experiment. After end of experiment, the prostate weights were measured in SD rats. Glutamic oxaloacetic transaminase (GOT) and glutamic pyruvic transaminase (GPT) levels was performed in serum. And we determined the 5-alpha reductase Ⅱ activity, testosterone levels, and dihydrotestosterone levels in prostate tissue and serum using ELISA kit. Results : As results, the prostate wights were increased in BPH group compared to normal group and were decreased in fina, AC30, and AC 50 groups, respectively. Serum GOT levels were decreased in AC50 group compared to BPH group. And Serum GPT levels of AC30 and AC50 groups were lower than BPH group. In addition, the 5-alpha reductase Ⅱ activity, testosterone levels, and dihydrotestosterone levels were decreased the fina, AC10, AC30, and AC 50 groups contrast to the BPH group. Furthermore, 5-alpha reductase Ⅱ activity, testosterone levels, and dihydrotestosterone levels were decreased dose dependent in AC groups compared to BPH group. Conclusion : These results suggest that AC could be used as a potential material for the treatment of BPH by decreasing the androgen levels in benign prostatic hyperplasia model rats.

• Restorative Dentistry and Endodontics
• /
• v.47 no.2
• /
• pp.21.1-21.11
• /
• 2022

Objectives: This study aimed to investigate the bonding effects of cleaning protocols on dentin impregnated with endodontic sealer residues using ethanol (E) or xylol (X). The effects of dentin acid etching immediately (I) or 7 days (P) after cleaning were also evaluated. For bonding to dentin, universal adhesive (Scotchbond Universal; 3M ESPE) was used. The persistence of sealer residues, hybrid layer formation and microshear bond strength were the performed analysis. Materials and Methods: One hundred and twenty bovine dentin specimens were allocated into 4 groups (n = 10): G1 (E+I); G2 (X+I); G3 (E+P); and G4 (X+P). The persistence of sealer residues was evaluated by SEM. Confocal laser scanning microscopy images were taken to measure the formed hybrid layer using the Image J program. For microshear bond strength, 4 resin composite cylinders were placed over the dentin after the cleaning protocols. ANOVA followed by Tukey test and Kruskal-Wallis followed by Dunn test were used for parametric and non-parametric data, respectively (α = 5%). Results: G2 and G4 groups showed a lower persistence of residues (p < 0.05) and thicker hybrid layer than the other groups (p < 0.05). No bond strength differences among all groups were observed (p > 0.05). Conclusions: Dentin cleaning using xylol, regardless of the time-point of acid etching, provided lower persistence of residues over the surface and thicker hybrid layer. However, the bond strength of the universal adhesive system in etch-and-rinse strategy was not influenced by the cleaning protocols or time-point of acid etching.