• Resources Recycling
• /
• v.7 no.4
• /
• pp.64-75
• /
• 1998

The purpose of this study is to produce high putity composite powder composed of Fe-oxide, Mn-oxide and Mn-ferrite having superior homogencity in composition and particle size distribution by co-roasting process. Binary component metal (Fe, Mn) chloride solutions were produced by dissolving mill scale and ferro-mangancse alloy in hydrochloric acid. These chloride solutions contained the impurities such as SiO$_{2}$, P, Al, Ca and Na, which were originated from the Fe/Mn source materials. The neutralization and polymeric coagulant method were adoped to refine the hydrochloric liquor. When pH is far below the isoelectric point (pH 2-3), the SiO$_{2}$ was the most effectively reduced element, while other impurities remained unchanged. By increasing pH above 3, most of the impurities could be reduced effectively due to the coprecipitation reaction. The polymeric coagulants such as poly vinyl alcohol, resin amine and ammonium molybdate were found to have no effect on the spray roaster designed by the authors. The produced oxide powders were confirmed to be mixtures of Fe-oxide, Mn-oxide and mn-ferrite. the powders were homogeneously mixed and the particle size increased sleeply with increasing co-roasting temperature.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.689-697
• /
• 1998

In this work, we studied the equilibrium, rate and rate determining step of uranium adsorption on RGP resins of MR type prepared by varying the degree of crosslinking and the amount of diluent. The equilibrium of uranium adsorption on RGP resins were well explained by Frendrich isotherm as well as Langmuir isotherm model. The amount of adsorption and adsorption rate increase with the adsorption temperature. The heat of the adsorption was 11 kcal/mol. The adsorption rates of uranium on RGP resins were decreased in the order of RGP-10(50)>RGP-1(50)>RGP-2(50)>RGP-5(50)>RGP-0(50) and RGP-2(75)>RGP-2(100)>RGP-2(50)>RGP-2(30)>RGP-2(0). The diffusion resistance of uranium into RGP resin increased as follows; molecular diffusion < pore diffusion < surface diffusion. On the other hand, the surface diffusion was more dominative than the pore diffusion in intraparticle region. Thus, this result indicates that the adsorption mechanism of uranium on RGP resins is intraparticle diffusion controlled.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.36-42
• /
• 2019

In this study, the pre-treatment of lyocell fabrics was performed using phosphoric acid (PA) as a phosphorus flame retardant and melamine resin (MR) as a cross-linking agent to fabricate carbon fabrics using lyocell fibers. The physical and chemical changes were investigated by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD) and weight analysis. We confirmed that the weight yield of the carbon fabrics compared to the untreated fabrics increased by 14.7%, and width and length yield of the fabrics increased by 15% and 15.5%, respectively. This may be due to the effect of promoting the dehydration reaction of cellulose, forming char on the fiber surface, which induces a crosslinking reaction in the cellulose molecule and stabilizes the structure upon pyrolysis.

• CELLMED
• /
• v.11 no.4
• /
• pp.19.1-19.8
• /
• 2021

Background: Dysmenorrhea is the most common menstrual complaint in young women with a prevalence as high as 90% and is responsible for substantial repeated short-term absenteeism from school and work in young women. The objective of this study was to compare the efficacy of Commiphora myrrha and honey with mefenamic acid in primary dysmenorrhea. Materials and Methods: This prospective standard controlled trial was conducted at Luqman Unani Medical College Hospital and Research Center Vijayapura, India where 40 diagnosed patients of primary dysmenorrhea were randomly assigned to receive test drug (powdered Commiphora myrrha gum resin10g with 30g honey in two divided doses) or active control drug (mefenamic acid 250mg TID) for first 3days of menstruationfor two consecutive cycles. The primary outcome measure was reduction in severity of pain assessed by numerical pain rating scale (NPRS), and secondary outcome measures were improvement in quality of life (QOL) assessed by SF-36 and reduction in perceived stress score (PSS). Results: During first cycle treatment no significant difference was found in NPRS score (p=0.085) between the groups however significant difference in NPRS score (p<0.001) was seen during 2^nd treatment cycle. Significant reduction (p=0.022) in the perceived stress score was noted and overall quality of life was markedly improved after treatment in both the groups. Conclusion: These data suggest that Commiphora myrrha gum resin with honey is an effective herb in reducing symptoms of primary dysmenorrhea. These results need to be confirmed by a properly designed trial with a larger sample size. Trial registration: Clinical Trial Registry India CTRI/2017/09/009596.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.5
• /
• pp.334-344
• /
• 2023

Dregs from the sugar palm (Arenga pinnata) starch industry are considered a waste product of the agricultural industry and have not yet been optimally utilized. Therefore, this study aimed to manufacture particleboards from dregs using different amounts of adhesive and particle size ratios. Sugar palm dregs, which had been separated into fibers and powder/fine particles, were used as raw material for making particleboards. The fiber had an average length of 6.84 ± 3.23 cm, while the fine particles were of a size that passed through size 10 mesh and remained in size 60 mesh. Three ratios of fiber to fine particles (100:0, 75:25, and 50:50 wt%) with three different amounts of sucrose-citric acid adhesive (10, 15, and 20 wt%) were used in this study. Increasing the amount of fine particles and the resin content can improve the physical properties and the internal bond strength of boards made from sugar palm dregs. The fine particles possibly filled the gap between the fibers in the particleboard, while the fibers exhibited a high bending strength. As a result, a high-performance particleboard can be attained by combining the composition ratio of fiber/fine particles and resin content. In this study, particleboards made from fiber/fine particles (75:25 wt%) and adhesive content of 15 wt% and 20 wt% had the mechanical properties that met the requirements of Japanese Industrial Standard (JIS) A 5908 type 18. Sugar palm dregs have the potential to be used as raw materials to create value-added particleboards.

• Korean Journal of Pharmacognosy
• /
• v.21 no.2
• /
• pp.130-136
• /
• 1990

Four known cardiotonic steroids were isolated from roots of Adonis amurensis Regel et Radde and identified as digitoxigenin, cymarin, K-strophanthin and convallatoxin by chromatography on Amberlite XAD-2 resin and silica gel, high performance liquid chromatography and gel chromatography on Sephadex LH-20. In order to clarify the structure-activity relationship, thirteen related compounds of digitoxigenin were tested for the inhibitory activities for $Na^+,\;K^+$-adenosine triphosphatase from guinea pig heart. The inhibitory activities of related compounds of digitoxigenin were dependent upon the dicarboxylic acid and amino acid components. The compound having both the arginine and suberic acid moiety showed the higher inhibitory activity. The sulfate and glucuronide of digitoxigenin exhibited much less potency than the parent genin.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.645-648
• /
• 2017

A catalyst for promoting the commercialization of N-phenylamleimide (PMI), a compound used to strengthen the heat resistance of ABS resins and also completely imported, was developed. N-phenylmaleamic acid (PMA) was first quantitatively obtained through the reaction of maleic anhydride and aniline. A catalyst was then investigated for obtaining PMI. Zinc acetate/$Et_3N$, composite catalyst, showed better performance than a single acid catalyst. By using the developed composite catalyst, PMI could be synthesized with the yield and purity of 90% and 99.3%, respectively without any further purification processes.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.3
• /
• pp.241-247
• /
• 2001

Aqueous urethane dispersion resin begins to assume commercial importance due to increasing environmental awareness of VOC in coating industry. Moreover there have been strong industrial needs for the development of reactive-type polyurethane flame retardant coatings. In this study, chlorinated polyester polyols were synthesized by two step polycondensation reaction using mono chloroacetic acid, adipic acid, trimethylol propane, and 1,4-butanediol. In the next step polyurethane dispersion was prepared using these chlorinated polyester polyols and isophorone diisocyanate with dimethylol propionic acid(DMPA) and trimethylamine. The structure of chlorinated polyol was characterized by GPC, FT-IR and NMR. Particle size and its distribution were examined in terms of various dispersion parameters including molecular weight and composition of polyol, amount of DMPA, and NCO/OH ratio, etc. The effect of chlorinated polyols on flammability was also evaluated.

• Membrane and Water Treatment
• /
• v.6 no.6
• /
• pp.439-449
• /
• 2015

Carbolic Acid which is called phenol is one of the important starting and/or intermediate materials in various industrial processes. However, its excessive release into environment poses a threat to living organisms, as it is a highly carcinogens and hazardous pollutant even at the very low concentration. Thus removal of phenol from polluted environments is very crucial for sustainable remediation process. We developed a low cost adsorption method for separating phenol from a model aqueous solution. The phenol adsorption was studied using two adsorbents i.e., Amber lite XAD-16 and Amber lite XAD-7 HP with a constant amount of resin 0.1 g at varying aqueous phenol concentrations ($50-200mgL^{-1}$) at room temperature. We compared the efficacy of two phenol adsorbents for removing higher phenol concentrations from the media. We investigated equilibrium and kinetics studies of phenol adsorption employing Freundlich, Temkin and Langmuir isotherms. Amberlite XAD-16 performed better than Amberlite XAD-7 HP in terms of phenol removal efficiency that amounted to 95.52%. Pseudo second order model was highly fitted for both of the adsorption systems. The coefficient of determination ($R^2$) with Langmuir isotherm was found to be 0.98 for Amberlite XAD-7 HP. However, Freundlich isotherm showed $R^2$ value of 0.95 for Amberlite XAD-16, indicating that both isotherms could be described for the isotherms on XAD-7 HP and Amberlite XAD-16, respectively.

• Restorative Dentistry and Endodontics
• /
• v.5 no.1
• /
• pp.13-18
• /
• 1979

The purpose of this study was to measure the roughness on the acid -etching surface. The etching agents of three-kinds composite resins were used to etch the tooth surface. Newly extracted I5-anterior teeth were invested with self-curing acrylic resin, and the labial surface was exposed. The exposed labial side was polished with abrasive papers and finally polished on polishing machine with zinc oxide powder. After the teeth were polished, the specimens were washed by water and dried by air. Surface roughness tester, Taylor-Habson's Taly Surf-10, (Fig-1) was used to measure roughness of this unetched tooth surface. And that, the specimens were divided into three groups. The first group was etched with Restodent etchant, the second group was etched with Nuva-system etchant, and Hi-pol etching agent was used in the third group. And the surface roughness tester was used to measure roughness of the etching teeth surface. The results obtained were as follows. 1. The roughness of acid-etched enamel were increased $2{\mu}m$ to $6{\mu}m$. 2. Hi-pol etchant produced the smoothest surface($2.3{\mu}m$). 3. Restodent etchant($3.8{\mu}m$) and Nuva-system etchant($3.7{\mu}m$) produced rougher surface than Hi-pol.