• 대한소아치과학회지
• /
• 제37권4호
• /
• pp.412-421
• /
• 2010

초기 우식 병소에 대한 비침습적 접근 방법인 resin infiltration은 병소 표층의 완전한 부식을 통해 병소 본체 내로의 레진침투를 시도한다. 다양한 접착 레진을 사용한 레진 침투 효과는 레진 자체의 물성 뿐 아니라 표면 처리방법과 관련하여 그 깊이에 한계를 보여, 최근 흐름성이 높은 infiltrant resin과 염산을 사용한 최적의 표면 처리 방법이 소개되었다. 이러한 접근은 비침습적인 방법임에도 불구하고 표층 제거에 따른 논란이 여전히 존재하므로, 본 연구는 표층 제거를 통한 레진의 침투깊이 강화가 우식저지 능력을 향상시키는데 기여할 수 있는지의 타당성을 평가하기 위해 시도되었다. 인접면에 초기 우식 병소를 보이는 탈락된 유구치에서 우식의 깊이가 법랑질 내층에 국한된 시편을 선택하였다. 시료의 표면 절반에 35% 인산으로 30초간 처리하고 ethanol 처리 및 infiltration을 시행한 1군과 시행하지 않은 2군, 35%인산으로 60초간 처리하고 동일한 처치를 시행한 3군과 시행하지 않은 4군, 15% 염산으로 120초간 처리하고 동일한 처치를 시행한 5군과 시행하지 않은 6군으로 분류하였다. 2주간 인공 우식을 유발하고 micro-CT를 촬영하여 처리 전후 병소의 방사선 밀도 변화를 관찰하고, 주사형 전자현미경으로 그 표면을 관찰하여 다음과 같은 결론을 얻었다. 1. 표층의 처치와 무관하게, 레진 처리를 시행한 모든 실험군에서 대조군에 비하여 인공우식 유발 후의 방사선 밀도 감소가 적었다(p<0.05). 2. 표층이 완전히 제거되어 레진 침투 깊이가 향상된 5군에서 방사선 밀도 변화가 가장 적었다. 1, 3, 5 군 간에 유의한 차이를 보였다(p<0.05). 3. 주사형 전자현미경 관찰 결과 5군보다 1, 3군에서 더 불규칙하고 광범위한 표층 파괴상이 관찰되었다.

• 대한소아치과학회지
• /
• 제24권2호
• /
• pp.460-474
• /
• 1997

The purpose of this study was to evaluate and compare the effectiveness of various low-viscosity resin systems used as rebonding agents to prevent microleakage at the margins of class I composite resin restorations. Seventy sound human premolars were selected for experiment. Class I cavities were prepared and each cavity was conditioned with a 37% phosphoric acid for 15 sec, rinsed with water for 15 sec, and dried with compressed air. Bonding agent(Scotchbond Multipurpose, 3M Co.) was applied and a hybrid composite resin (Z-100, 3M Co.) was placed using an incremental technic. The excess cured composite resin was carefully removed with Sof-Lex discs(3M Co.) to expose the original margins of the cavity. The following seven groups were established : group 1 was not rebonded and used as control group ; group 2 was rebonded with a Scotchbond Multipurpose(3M Co.) and finished ; group 3 was rebonded with a Fortify(BISCO) and finished ; group 4 was rebonded with a Concise white sealant(3M Co.) and finished ; group 5 was rebonded with a Concise white sealant(3M Co.) and not finished ; group 6 was rebonded with a P&F sealant(BISCO) and finished; group 7 was rebonded with a P&F sealant(BISCO) and not finished. The specimens were then subjected to 500 thermocycles between 5 & 65 with a 10 see dwell time and immersed in 2% methylene blue dye solution for 24 hours and sectioned with low-speed diamond cutter into two part under water condition. The extent of microleakage at rebonded margins was evaluated microscopically and scored for dye penetration according to the following scale : 0=no dye penetration ; 1=dye penetration to half-way along axial wall between enamel surface and DEJ ; 2=dye penetration beyond halfway along axial wall between enamel surface and DEJ ; 3=dye penetration to the full depth of DEJ or beyond DEJ. Selected samples were prepared for SEM observation to determine the depth of penetration of the rebonding agent into the marginal interface. The obtained results were as follows: 1. In the group 2 and 3, which is rebonded with a Scotchbond Multipupose and Fortify, dye penetration score were decreased significantly than that of group 1 (P<0.05), but group 4 and 6 were not statistically different from group 1(P>0.05). 2. There were significant differences between group 4, 6 and group 5, 7 when compared by dye penetration score (P<0.05). 3. In the SEM observation, Scotchbond Multipurpose and Fortify were penetrated within $30-40{\mu}m$ depth of the outermost surface. However, both sealants were failed to penetrate into the debonded interface.

• 대한화학회지
• /
• 제28권6호
• /
• pp.403-411
• /
• 1984

중금속이온의 흡착, 분리 및 회수를 위하여 8-Hydroxyquinoline의 할로겐유도체인 DXHQ (5,7-dihalo-8-hydroxyquinoline)들을 Amberlite XAD-7 및 XAD-4에 침윤시킨 DXHQ - XAD 침윤수지들을 만들고, 침윤수지들의 특성을 비교하였다. XAD-7 수지에 대한 DXHQ (X : Cl, Br, I)의 침윤량은 DCHQ < DBHQ < DIHQ의 순위로 증가하였고, XAD-4에 대한 DIHQ의 최적 흡착 pH 범위는 3.0~7.0였다. DXHQ - XAD 침윤수지들은 모두 pH3.0 ~7.0범위에서 안정하였고, 염산용액에서의 DIHQ - XAD의 안정성은 XAD-7의 경우보다 XAD-4가 컸다. 각 침윤수지에 의한 금속이온들의 최적 흡착 pH 범위, 흡착몰비 및 흡착능이 결정되었다. 침윤수지에서의 금속이온의 안정성은 M-DCHQ-XAD-7 < M-DBHQ-XAD-7 < M-DIHQ-XAD-7 순위로 증가하였으며, 흡착된 금속이온들은 0.5~3M HCl로 정량적 회수가 되었다. 침윤수지들의 반복 사용 실험은 5회 정도 가능하였으며, 이때 침윤된 DXHQ는 약 반이 남아 있음을 알았다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.179-186
• /
• 2011

In an effort to understand the hydrolytic degradation process of cured urea-formaldehyde (UF) resins responsible for the formaldehyde emission of wood-based composite panels, this study analyzed the influence of acid hydrolysis on the morphology of cured UF resins with different formaldehyde/urea (F/U) mole ratios such as 1.6, 1.4, 1.2 and 1.0. Field emission-scanning electron microscopy (FE-SEM) was employed to observe both exterior and fracture surfaces on thin films of cured UF resins before and after the etching with hydrochloric acid as a simulation of the hydrolytic degradation process. FE-SEM images showed that the exterior surface of cured UF resin with the F/U mole ratio of 1.0 had spherical structures after the acid hydrolysis while the other cured UF resins were not the case. However, the fracture surface observation showed that all the samples possessed spherical structures in the cured state of UF resins although their occurrence and size decreased as the F/U mole ratio increased. For the first time, we found the spherical structures in cured UF resins of higher F/U mole ratio of 1.4. After the acid hydrolysis, the spherical structures became a much predominant at the fracture surface. These results indicated that the spherical structures in cured UF resinswere much more resistant to the hydrolytic degradation by the acid than amorphous region.

• 대한치과교정학회지
• /
• 제42권1호
• /
• pp.32-38
• /
• 2012

Objective: The aim of this study was to compare the effects of different enamel conditioning techniques for bracket bonding. Methods: Ninety-one human premolars were randomly divided in six groups of 15 specimens each. The enamel surfaces of the teeth were etched with 35% orthophosphoric acid in Group 1, with a self-etching primer in Group 2, sandblasted in Group 3, sandblasted and etched with 35% orthophosphoric acid in Group 4, conditioned by Er:YAG laser in Group 5 and conditioned by Er:YAG laser and etched with 35% phosphoric acid gel respectively in Group 6. After enamel conditioning procedures, brackets were bonded and shear bonding test was performed. After debonding, adhesive remnant index scores were calculated for all groups. One tooth from each group were inspected by scanning electron microscope for evaluating the enamel surface characteristics. Results: The laser and acid etched group showed the highest mean shear bond strength (SBS) value ($13.61{\pm}1.14$ MPa) while sandblasted group yielded the lowest value ($3.12{\pm}0.61$ MPa). Conclusions: Although the SBS values were higher, the teeth in laser conditioned groups were highly damaged. Therefore, acid etching and self-etching techniques were found to be safer for orthodontic bracket bonding. Sandblasting method was found to generate inadequate bonding strength.

• Restorative Dentistry and Endodontics
• /
• 제39권2호
• /
• pp.95-103
• /
• 2014

Objectives: This study evaluated the effect of three antioxidizing agents on pullout bond strengths of dentin treated with sodium hypochlorite. Materials and Methods: Root canals of 75 single-rooted human teeth were prepared. Fifteen teeth were irrigated with normal saline for a negative control group, and the remaining 60 teeth (groups 2 - 5) with 2.5% NaOCl. The teeth in group 2 served as a positive control. Prior to post cementation, the root canals in groups 3 - 5 were irrigated with three antioxidizing agents including 10% rosmarinic acid (RA, Baridge essence), 10% hesperidin (HPN, Sigma), and 10% sodium ascorbate hydrogel (SA, AppliChem). Seventy-five spreaders (#55, taper .02, Produits Dentaires S.A) were coated with silica and silanized with the Rocatec system and ceramic bond. All the prepared spreaders were cemented with a self-adhesive resin cement (Bifix SE, Voco Gmbh) in the prepared canals. After storage in distilled water (24 h/$37^{\circ}C$), the spreaders were pulled out in a universal testing machine at a crosshead speed of 1.0 mm/min. Pull-out strength values were analyzed by one-way ANOVA and Tukey's HSD test (${\alpha}$ = 0.05). Results: There were significant differences between study groups (p = 0.016). The highest pullout strength was related to the SA group. The lowest strength was obtained in the positive control group. Conclusions: Irrigation with NaOCl during canal preparation decreased bond strength of resin cement to root dentin. Amongst the antioxidants tested, SA had superior results in reversing the diminishing effect of NaOCl irrigation on the bond strength to root dentin.

• 공업화학
• /
• 제7권5호
• /
• pp.843-848
• /
• 1996

현탁중합에 의하여 다공성 스티렌-디비닐벤젠 공중합 수지입자를 제조하였으며, 그 수지입자는 가교제인 디비닐벤젠과 세공형성제인 톨루엔 농도가 각각 30wt% 이상일 때만 다공성을 나타내었다. 다공성 수지입자의 비표면적은 디비닐벤젠과 톨루엔의 농도에 따라 증가하였으며, 진한 황산으로 황산화시켰을 때 비표면적은 감소하였다. 에틸아세테이트와 1-프로판올의 에스테르화 반응에서 황산화된 수지촉매의 활성은 가교도에 따라 증가하였다. 수용액 중 sodium dodecylbenzene sulfonate의 흡착에서 다공성 수지입자의 표면적에 따라 흡착량이 증가하였다.

• 상하수도학회지
• /
• 제8권3호
• /
• pp.9-18
• /
• 1994

활성슬러지 공정을 이용하여 Kraft 펄프공장에서 배출되는 유출수에 잔류하는 만성독성의 제거가능성을 평가하기 위하여 pilot plant를 운전하였다. 독성 이외에도 폐수내의 BOD, SS, resin과 fatty acids, 색도, 그리고 AOX와 같은 오염물질의 제거효과도 측정되었다. Pilot plant는 정상상태에서 약 10주 동안 운전되었으며 운전기간 동안의 평균 F/M 비율은 0.28, 그리고 sludge age는 8.4일로 계산되었다. 평균 MLSS 농도는 4,309mg/l이었으며 이중 휘발성 물질은 57%이었다. 운전기간 동안, BOD 제거계수(k)는 $30^{\circ}C$에서 8.2/일 이었으며 BOD 제거율은 full-scale 운전시보다 3~6% 정도 낮은 84%로 나타났다. 활성슬러지 유출수의 만성독성 시험은 Dinnel 방법과 BML 방법이 활용되었으며, 시험결과 pilot plant 활성슬러지 시스템에서도 효율적인 운전을 통하여 90% 이상의 독성제거가 가능함을 알 수 있었다. Pilot plant의 진 공정을 통해서 색도와 AOX의 제거는 매우 미미하였으나 resin과 fatty acids는 뛰어난 제거율을 나타내었다.

• Restorative Dentistry and Endodontics
• /
• 제8권1호
• /
• pp.69-76
• /
• 1982

The purpose of this study was to evaluate the color penetration of cavity margin with composite resin restorations in some Korean foods substance-soy sauce and hot bean paste. Fifty specimans which were extracted caries free third molar of young adults recently. All of the prepared 100 cavities were filled with two kinds of composite resin (Hipol$^{(R)}$and Restodent$^{(R)}$). The experimental specimans were divided into five groups by the following procedures. Group I : Filling of composite resin and polishing. Group II : Filling, polishing, etching of cavity and sealing. Group III : Etching, sealing, filling and polishing. Group IV : Etching, sealing, filling, polishing, and repeated of etching of cavity margin and sealing. Group V : Etching, sealing, filling, polishing, and sealing again without etching. Before examination, the restorated teeth were subjected to thermal cycling ($4^{\circ}C$ and $60^{\circ}C$). All the specimens were immersed in soy and 30% hot bean paste solution under $37^{\circ}C$ incubator during six weeks. Then, the specimens were sectioned bucco-lingually through the center of two restorations with diamond disk and examined under a. metallographic microscope. (Union 6617 U.S.A.) Thereafter, the degree of color penetration was calculated and analyzed. The obtained results were as follows: 1. The color penetration was the lowest in the procedure of Group III which was acid etching, sealing, composite resing filling, and polishing. 2. The color penetration occured in soy and hot bean paste, but the degree of penetration was not so significant statistically between them. 3. The degree of color penetration was not so significant statistically between Hipol$^{(R)}$ and Restondent$^{(R)}$.

• 구강회복응용과학지
• /
• 제22권3호
• /
• pp.211-220
• /
• 2006

Need of porcelain-repair system is largely demanding as dental porcelain restorations are increased in clinical dentistry. This study investigated shear bond strength of commercial porcelain-repair systems on dental porcelain and their reliability. Experimental groups were as follows; Group A Super Bond C&B, Group B Porcelain repair kit, Group C Ceramic repair, and Group D Spectrum system as a control. Porcelain disks were fired and embedded in epoxy resin. Porcelain surface were ground using 220 grit SiC disk, then cleaned in ultrasonic bath. Then porcelain specimens were treated with each repair system. A clear polystyrene cylinder 3.5 mm in internal diameter was filled with composite resin. Then the resin cylinder was polymerized with a visible light curing unit. Thirty one specimens at each group were prepared and stored at $37^{\circ}C$ distilled water for 48 h. Specimens were tested in an Instron testing machine according to ISO TR 11405. Mean shear bond strength and standard deviation of each group was $15.7{\pm}4.1MPa$ (Group A), $12.8{\pm}4.9MPa$ (Group B), $7.2{\pm}3.0MPa$ (Group C) and $9.6{\pm}2.2MPa$ (Group D). ANOVA and Tukey HSD post-hoc test showed that there were significant differences between groups (p<0.05). Data of bond strength were analyzed with two-parameter Weibull distribution. Confidence interval of Weibull modulus (m-parameter) at 95% of Group A (3.5-6.3) and Group D (3.6-6.0) were significantly higher than Group B (2.2-3.7) and Group C (2.0-3.4). There was little correlation between mean shear bond strength and Weibull modulus. Results indicated that acid-etching of porcelain surface increased porcelain-resin shear bonding strength.