• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.1-11
• /
• 2002

This study was conducted to investigate the effects of reaction pH conditions and hardener types on the reactivity, chemical structure and adhesion performance of UF resins. Three different reaction pH conditions, such as traditional alkaline-acid (7.5 → 4.5), weak acid (4.5), and strong acid (1.0), were used to synthesize UF resins which were cured by adding three different hardeners (ammonium chloride, ammonium citrate, and zinc nitrate) to measure adhesion strength. Fourier transform infrared (FT-IR) and carbon-13 nuclear magnetic resonance (¹³C-NMR) spectroscopies were employed to study chemical structure of the resin prepared under three different reaction pH conditions. Adhesion strength of the resins cured with three different hardeners was determined with lap shear specimens in tension. The gel time of UF resins decreased with an increasing in the amount of both ammonium chloride and ammonium citrate added in the resins. However, the gel time increased for zinc nitrate. Both FT-IR and ¹³C-NMR spectroscopies showed that the strong reaction pH condition produce uronic structures in UF resin, while both alkaline-acid and weak acid conditions produce quite similar chemical species in the resins. The maximum adhesion strength was occurred with the resin prepared under strong acid pH condition. However, this study indicated that the weak acid reaction condition provide a balance between increasing resin reactivity and improving adhesion strength of UF resin. The measurement of formaldehyde emission from the panels bonded with the UF resins prepared is planned for future work.

• Fibers and Polymers
• /
• 제2권1호
• /
• pp.135-139
• /
• 2001

Poly(hydroxamic acid) resin beads were prepared and complexed with various metal ions. We used IR spectroscopy to investigate the structure of metal complex. It proved that the products formed by introduction of metal ions gave stable and colored complex. It was found that the resin bead as synthesized would be a good column packing material for continuous extraction. Energy dispersive spectroscopy was use to study the distribution of metal ions in the resin matrix. It could be tentatively concluded that adsorption and diffusion of metal ions in the chelating resins mainly depended on the loading of the resin matrix which indicated interacting sites with metal ions.

• 환경위생공학
• /
• 제12권1호
• /
• pp.15-23
• /
• 1997

The anionic exchange resins with the Dowex-1 and Amberlite CG-400 form were transformed into resin of sulfate and acetate acid form, respectively. The uranyl complex ions with SO$_{4}$$^{2-}$ and CH$_{3}$COO$^{-}$ were adsorbed on the anion exchange resion mentioned above, and these complex ions were eluted as mixture eluents of 0.7M HNO$_{3}$ - 0.5M NH$_{4}$NO$_{3}$ by anion exchange chromatography. The optimum adsorption conditions of uranyl anion complex ions adsorbed on the upper of the resin colmun were 1.5-2.0 ml/min of flow rates at pH 2.0 and adsorptive power of uranyl complex ion of sulfuric acid type were nearly consistent with the Caussion normal distribution curve, whereas the elution state of UO$_{2}$(Ac)$_{2}$$^{4-}$ with acetic acid type was departed. The weighing form obtained from resin of sulfuric acid and aceric acid type was U$_{3}$O$_{8}$ whose recovery was 91.7%. The possibility of recovering uranium from the monazite sulfate solution using a strong base anion resin, Amberlite CG-400(sulfate form), was successfully recovered more than 90%.

• 분석과학
• /
• 제6권5호
• /
• pp.435-442
• /
• 1993

루빈산이 결합된 카르복시메틸화된 폴리아민-폴리우레아(RCCPPI) 수지가 클로로카르복시메틸화된 폴리아민-폴리우레아(CCPPI) 수지와 루빈산으로부터 1단계 반응에 의하여 합성되었다. 이 수지의 구조는 적외선 분광광도법, 원소분석 및 시차열분석법으로 확인되었다. 이 수지에 대한 중금속 흡착특성은 용액의 pH를 변화시키면서 뱃치법에 의하여 분포계수($K_d$)를 측정하고, 프론탈크로마토그래피법으로 관류점을 측정하여 조사하였다. 중금속 이온용액을 이 수지로 충진된 관에 통과시킴에 의하여 고농도의 나트륨, 칼슘 및 아세트산염 용액 중에 존재하는 미량 중금속 이온을 최적 pH에서 농축 및 회수 정량할 수 있었다. 농축 인자는 25 이상이었고 흡착된 중금속들은 0.025M EDTA 용액(pH 9.0)으로 회수 정량하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.672-681
• /
• 2015

As a part of abating the formaldehyde emission of amino resin-bonded wood-based composite panels, this study was conducted to investigate hydrolytic stability of urea-melamine-formaldehyde (UMF) resin depending on various hydrolysis conditions and hardener types. Commercial UMF resin was cured and ground into a powdered form, and then hydrolyzed with hydrochloric acid. After the acid hydrolysis, the concentration of liberated formaldehyde in the hydrolyzed solution and mass loss of the cured UMF resins were determined to compare their hydrolytic stability. The hydrolysis of cured UMF resin increased with an increase in the acid concentration, time, and temperature and with a decrease in the smaller particle size. An optimum hydrolysis condition for the cured UMF resins was determined as $50^{\circ}C$, 90 minutes, 1.0 M hydrochloric acid and $250{\mu}m$ particle size. Hydrolysis of the UMF resin cured with different hardener types showed different degrees of the hydrolytic stability of cured UMF resins with a descending order of aluminum sulfate, ammonium chloride, and ammonium sulfate. The hydrolytic stability also decreased as the addition level of ammonium chloride increased. These results indicated that hardener types and level also had an impact on the hydrolytic stability of cured UMF resins.

• 대한화학회지
• /
• 제3권1호
• /
• pp.18-22
• /
• 1954

The cation exchange resins are synthesized from p-phenolsulfonic acid, formalin, and sodium hydroxide catalyser, and the ion exchange properties of them are studied with respect to their reactant ratios. Maximum exchange capacity was 2.06 me/G, much smaller than the theoretical value of 3.42 me/G to be expected for that of the structure: Under the present experimental conditions, much -SO3H radical should have been split away.

• Bulletin of the Korean Chemical Society
• /
• 제12권4호
• /
• pp.376-379
• /
• 1991

Pyrazolone group containing resin was tested as an acyl carrier in solid phase peptide synthesis. Several kinds of dipeptide derivatives were prepared by aminolysis reactions of Boc-amino acid-pyrazolone resin active ester with various carboxyl protected amino acid derivatives. It was found that the rates of aminolysis reactions were largely dependent on the bulkiness of the amino acid side chains, the carboxyl protecting groups, and the swelling property of the resin. All the dipeptide derivatives were obtained in high yield in 20-30 minutes, and the pyrazolone resin could be reused repeatedly in peptide synthesis without any change of its reactivity.

• 약학회지
• /
• 제28권1호
• /
• pp.21-23
• /
• 1984

High performance amino acid analyzing method has been developed for the routine analysis of taurine in preparations. Ion-exchange resin #2619 Hitachi Custom Ion-Exchange Resin, $2.6(I.D.){\times}150$(length)mm was used as column, buffer I, pH 3.3 as mobile phase. The retention time of taurine was 7 minutes. Calibration curve by peak height for standard taurine was linear from 2.5ppm to 25ppm. The reproducibility showed relative standard deviation $\pm$1.9% when analyzed 10 times for standard solution. The samples could be continuously analyzed without regenerating the resin between samples. Five samples were applied to column every 12 min. and then the resin was regenerated for 30 min. during one analyzing cycle time, 90 min. The automatic amino acid analyzer has made it possible to assay multiple samples in a relatively short period of time using the analytical magnetic program card. The high sensitivity and specificity of the analytical column of the automatic amino acid analyzer permits the routine analysis of taurine in preparations.

• 한국잠사곤충학회지
• /
• 제27권2호
• /
• pp.28-39
• /
• 1985

견직물의 실용성능(방추도, 세탁성)을 개선할 목적으로 실크하브다이(silk habutae)에 실리콘수지를 유화 가공법으로 처리하였다. 실리콘가공 하브다이의 방추도, 발수도, 유연도, 강신도, 수분율 등은 직물검사 방법에 따라서 검사하였고 가공 후 견피브로인의 구조적인 변화를 구명하기 위하여 주사전자현미경, 아미노산분석, X-선 회절강도, FT-IR 흡수분석에 의하여 검토한 결과 아래와 같은 결과를 얻었다. 1) 견하브다이 직물의 방추도는 soaping 처리오 큐어링 조건에 의하여 현저히 개선되었다. 2) 실리콘 수지 가공에 의하여 견하브다이의 발수도와 유연도가 향상되었고, 가공 후 silk fibroin을 주사전자현미경으로 관찰한 결과 견섬유 특유의 불규칙한 섬유표면은 평활하게 관찰되었다. 3) 실리콘 수지와 silk fibroin의 반응에 따라서 피브로인 조성 아미노산 중 극성기를 가지고 있는 아미노산의 감소비율이 현저하였다. 4) 실리콘 수지가공 silk habutae는 soaping에 의하여 X-선 회절강도가 높아지는 경향이었다. 5) 가공 후 견하브다이의 FT-IR 흡수곡선에 실록산등의 peak가 검출된 것으로 미루어 fibroin의 개질이 가능하다고 생각된다.

• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.23-36
• /
• 1994

Most investigators recommended that porcelain surface should be roughened with abrasives and/or be etched with acid in repairing the fractured porcelain with composite resin. This study was designed to evaluate the effect of porcelain surface treatments on the bond strength between porcelain and composite resin by measuring the shear bond strength and observing the porcelain surface with SEM. 48 porcelain disc were fabricated with Vintage porcelain and embedded in epoxy resin with the test surface exposed. The specimens were divided four groups at random and the test surfaces of the four groups were prepared as follows : Group 1 : Porcelain surface was roughened with a fine diamond and treated with 32% phosphoric acid gel for 10 seconds. Group 2 : Porcelain surface was roughened with a fine diamond and etched with 8% hydrofluoric acid gel for 5 minutes. Group 3 : Porcelain surface was roughened with a coarse diamond and treated with 32% phosphoric acid gel for 10 seconds. Group 4 : Porcelain surface was roughened with a coarse diamond and etched with 8% hydrofluoric acid gel for 5 minutes. All specimens were washed for 30 seconds. A representative specimen of each group was selected and the porcelain surface was observed with SEM at 1000 magnification. Remaining specimens were silanated, bonded with composite resin, thermocycled, and shear-tested on specially designed zig connected to Instron machine. The results were as follows : 1. The shear bond strength of the group etched with hydrofluoric acid was significantly higher than that of group treated with phosphoric acid(p<0.01). 2. The shear bond strength of the group roughened with a fine diamond was not significantly different from that of the group roughened with a coarse diamond(p>0.01). 3. SEM examination of prepared porcelain surfaces revealed that the surface etched with hydrofluoric acid showed numerous microporosities, undercut, and rougher surface than the surface treated with phosphoric acid. 4. All specimens etched with hydrofluoric acid showed cohesive failure within porcelain, but specimens treated with phosphoric acid mainly showed adhesive failure between porcelain and composite resin.