• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.292-299
• /
• 2006

Batch experiments were performed to evaluate the effects of the electron donor dosage and the initial biomass on the reductive dechlorination of perchloroethene(PCE) with benzoate as an electron donor. When benzoate was added less than the theoretical requirement for dechlorination(electron donor/acceptor ratio=0.5 and 1), the dechlorination efficiency increased from 71% to 94.3% with the increase in benzoate dosage, but the fraction of electron equivalent utilized for dechlorination decreased from 92.7% to 79.6%. Methane production was observed when the hydrogen concentration was higher than the threshold value(10 nM) after PCE and trichloroethene (TCE) were reduced to cis-1,2-dichloroethene(cDCE). When benzoate was added more than the theoretical requirement, the residual hydrogen converted into methane after the completion of dechlorination. The increase in the seeding biomass shortened the lag time for dechlorination, but it did not affect the maximum dechlorination rate as it was mainly governed by the benzoate fermentation rate. When the seeding biomass concentration was high, active dechlorination during the early period increased dechlorination efficiency while decreasing methane production.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.512-517
• /
• 2010

This study was conducted to the evaluate nutritional value of corn taffy residue (CTR), a by-product from Korean traditional taffy, and to investigate the dietary effect of CTR on the yield and composition of milk from dairy cows. Relatively high concentrations of residual enzymes and sugars were found in CTR. Protein and fat concentrations were high, comparable to those of corn gluten meal. Inclusion of 1, 3, and 6% CTR in total mixed rations yielded more milk (p<0.05) than in the control group, and increased milk fat (p<0.05) in high-producing cows (approximately 30 kg). In low-producing cows, (approximately 20 kg), milk yield was increased by 1 and 6% CTR, and milk protein was enhanced by 3% CTR (p<0.05). Based on these results, utilization of CTR is recommended for production of high quality and economical animal products.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.593-599
• /
• 2013

In this paper, the GPS cycle-slip detection for carrier-phase based positioning of land vehicle is presented. For the carrier phase based positioning, cycle-slip detection is necessary to get the reliability of positioning result. There exists many cycle-slip detection algorithms, but we detect the cycle-slip by using the monitoring value which is defined as residual between the carrier phase measurement and estimated value from low-cost inertial sensor. To achieve goal of paper, low-cost cycle-slip detection system, permissible specification region of inertial sensor is derived. By using the result of permissible region, appropriate inertial sensor of cycle-slip detection can be decided, proper cost and proper specification. To verify the result of this paper, we conduct the rate table test. As a result, required cycle-slip detection performance is satisfied conservatively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.9
• /
• pp.1340-1348
• /
• 2019

Objective: The objectives were to compare variance components, genetic parameters, prediction accuracies, and genomic-polygenic estimated breeding value (EBV) rankings for milk yield (MY) and fat yield (FY) in the Thai multibreed dairy population using five single nucleotide polymorphism (SNP) sets from GeneSeek GGP80K chip. Methods: The dataset contained monthly MY and FY of 8,361 first-lactation cows from 810 farms. Variance components, genetic parameters, and EBV for five SNP sets from the GeneSeek GGP80K chip were obtained using a 2-trait single-step average-information restricted maximum likelihood procedure. The SNP sets were the complete SNP set (all available SNP; SNP100), top 75% set (SNP75), top 50% set (SNP50), top 25% set (SNP25), and top 5% set (SNP5). The 2-trait models included herd-year-season, heterozygosity and age at first calving as fixed effects, and animal additive genetic and residual as random effects. Results: The estimates of additive genetic variances for MY and FY from SNP subsets were mostly higher than those of the complete set. The SNP25 MY and FY heritability estimates (0.276 and 0.183) were higher than those from SNP75 (0.265 and 0.168), SNP50 (0.275 and 0.179), SNP5 (0.231 and 0.169), and SNP100 (0.251and 0.159). The SNP25 EBV accuracies for MY and FY (39.76% and 33.82%) were higher than for SNP75 (35.01% and 32.60%), SNP50 (39.64% and 33.38%), SNP5 (38.61% and 29.70%), and SNP100 (34.43% and 31.61%). All rank correlations between SNP100 and SNP subsets were above 0.98 for both traits, except for SNP100 and SNP5 (0.93 for MY; 0.92 for FY). Conclusion: The high SNP25 estimates of genetic variances, heritabilities, EBV accuracies, and rank correlations between SNP100 and SNP25 for MY and FY indicated that genotyping animals with SNP25 dedicated chip would be a suitable to maintain genotyping costs low while speeding up genetic progress for MY and FY in the Thai dairy population.

• Journal of Gastric Cancer
• /
• v.21 no.4
• /
• pp.379-391
• /
• 2021

Purpose: Promoter DNA methylation of various genes has been associated with metachronous gastric cancer (MGC). The cancer-specific methylation gene, cysteine dioxygenase type 1 (CDO1), has been implicated in the occurrence of residual gastric cancer. We evaluated whether DNA methylation of CDO1 could be a predictive biomarker of MGC using specimens of MGC developing on scars after endoscopic submucosal dissection (ESD). Materials and Methods: CDO1 methylation values (TaqMeth values) were compared between 33 patients with early gastric cancer (EGC) with no confirmed metachronous lesions at >3 years after ESD (non-MGC: nMGC group) and 11 patients with MGC developing on scars after ESD (MGCSE groups: EGC at the first ESD [MGCSE-1 group], EGC at the second ESD for treating MGC developing on scars after ESD [MGCSE-2 group]). Each EGC specimen was measured at five locations (at tumor [T] and the 4-point tumor-adjacent noncancerous mucosa [TAM]). Results: In the nMGC group, the TaqMeth values for T were significantly higher than that for TAM (P=0.0006). In the MGCSE groups, TAM (MGCSE-1) exhibited significantly higher TaqMeth values than TAM (nMGC) (P<0.0001) and TAM (MGCSE-2) (P=0.0041), suggesting that TAM (MGCSE-1) exhibited CDO1 hypermethylation similar to T (P=0.3638). The area under the curve for discriminating the highest TaqMeth value of TAM (MGCSE-1) from that of TAM (nMGC) was 0.81, and using the cut-off value of 43.4, CDO1 hypermethylation effectively enriched the MGCSE groups (P<0.0001). Conclusions: CDO1 hypermethylation has been implicated in the occurrence of MGC, suggesting its potential as a promising MGC predictor.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.1
• /
• pp.5-19
• /
• 2010

Geo-layer information is important to determine pile length and estimate residual settlement in the construction site. An overall spatial distribution of geo-layers in the entire construction site can be predicted using drill-log information. In this study, the geo-layer distribution at Song-do area was estimated by kriging and inverse distance weighting methods, and a cross validation was adopted to verify the reliability of estimation results. The analysis results indicate that the best fitted theoretical variogram model to the experimental variogram does not always provide the most reliable estimation in the kriging method. The proper $\alpha$ value of inverse distance weighting method must be determined by types of geo-layer, because the $\alpha$ value is affected by types of geo-layer. Results of the kriging method show more reliable results than those of inverse distance weighting method, and the structure of geo-layer distribution could be evaluated by variogram in the kriging method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.71-77
• /
• 2023

With the continuous industrial development, not only natural resource depletion, waste generation, but also various weather conditions are becoming more frequent. Efforts are continuing to recycle industrial by-products to overcome the climate crisis and save resources. Slag is a representative by-product generated in the steel industry, and it is characterized by improving rutting resistance and moisture sensitivity by increasing strength and reducing deformation when used as a material for asphalt concrete. On the other hand, slag has expansion properties so it is used as a relatively low-value-added material such as embankment and refilling materials. In order to expand the application of slag, an experiment was conducted to evaluate the crack resistance of slag asphalt concrete pavement. As a result of the indirect tensile strength test, it was found that the asphalt mixture using slag aggregate showed a value 1.13 times higher than that of the general HMA with the same particle size, and the toughness was 1.17 units, improving crack resistance. In addition, it was found that the failure number of the 4-point beam fatigue experiment and the slag asphalt mixture was 20,409, which was more than doubled compared to the general HMA. Furthermore, Overlay Test showed a tensile load residual rate of 4 times or more, improving crack resistance to repeated fatigue. Accordingly, the use of slag aggregate will likely have various advantages in improving the performance of asphalt concrete pavement.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.30 no.2
• /
• pp.69-78
• /
• 2019

The objective of this study was to investigate the quality properties of sausages added with the atmospheric pressure plasma treated extract of Perilla frutescens Britton var. acuta Kudo (red perilla). The lyophilized powder of red perilla extract treated by atmospheric-pressure plasma contained 7.5 g kg^-1 nitrite. Sausage samples were manufactured with the addition of sodium nitrite (Control), celery powder (Celery), or plasma-treated extract of red perilla (PTP) to obtain nitrite concentration of 70 mg kg^-1. The residual nitrite content was the lowest in PTP during storage for 21 days at 4℃ (p<0.05). The total aerobic bacteria counts were higher in PTP than in Control and Celery during storage at 4℃ (p<0.05). Malondialdehyde content of sausages was significantly lower in PTP than in Control and Celery during storage (p<0.05). PTP showed the lowest L^* value and the highest b^* value among the tested sausage samples during storage (p<0.05). PTP received the low scores in all the sensory properties of sausages because of its inherent color and flavor. The results suggested that the plasma-treated extract of red perilla was an unsuitable natural nitrite source for cured meat products because of its adverse effect on sensory quality. However, natural nitrite source with increased nitrite content can be produced by the treatment of the natural plant extract with atmospheric-pressure plasma.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.47 no.3
• /
• pp.86-94
• /
• 2024

In this study, an attempt was made to approximate the main characteristic values of Bi_0.5(Na_0.78K_0.22)_0.5TiO₃ (= BNKT) depending on the content of Fe₂O₃ additives, aiming to approach the values of lead(Pb) piezoelectric ceramic materials (PZT). Specifically, when the piezoelectric coefficient (d₃₃) value of lead(Pb) piezoelectric ceramic material (PZT polycrystalline ceramic powder) is 300[pC/N] or higher, it is applied for hard purposes such as ultrasonic welding machines and cleaning machines, and when it exceeds 330[pC/N], it is applied for soft purposes like piezoelectric sensors. In this study, research and development were conducted for devices with a piezoelectric coefficient (d₃₃) of 300[pC/N] or more for actuators. For this purpose, K⁺ exceeding 0.02 to 0.12 mol% was added to (Na_0.78K_0.22)_0.5Bi_0.5TiO₃ to analyze structural changes due to K⁺ excess, and (Na_0.78K_0.22)_0.5Bi_0.5TiO₃ + 8mol% K₂CO₃ Ti⁴⁺ was substituted with Fe³⁺ to manufacture lead-free piezoelectric materials. As a result, ceramics with Fe³⁺ substitution at x = 0.0075 yielded an average value of d₃₃ = 315[pC/N]. Furthermore, for ceramics with Fe³⁺ substitution at x = 0.0075, the average values of maximum polarization (P_max), residual polarization (P_rem), and coercive field (E_c) were found to be 39.63 μC/cm², 30.45 μC/cm², and 2.50 kV/mm, respectively. The reliable characteristic values obtained from the research results can be applied to linear actuator components (such as the zoom function of mobile cameras, LDM for skin care, etc.) and ultrasonic vibration components.

• Journal of Korean Society of Forest Science
• /
• v.107 no.1
• /
• pp.71-80
• /
• 2018

The effect of $SO_2$ treated pads (Sodium metabisulphate 0, 0.5, 1.0, 2.0 g/kg) on the quality of dried persimmons and dried persimmons slices were investigated. The $SO_2$ treated pads did not affect to weight, moisture loss rate, and soluble solid contents of dried persimmons and dried persimmons slices. The color change (${\Delta}E$) of dried persimmons and dried persimmons slices after storage for 8 weeks were the highest (value=6.0, 6.2) in control, whereas that was the lowest (value=4.8, 4.7) under $SO_2$ pad 2.0 g/kg condition, respectively. When we measured the browning degree of dried persimmons, they showed O.D. 0.65, 0.57, 0.29, and 0.18 in serial dilution treated pads with $SO_2$ pad 0, 0.5, 1.0, and 2.0 g/kg. The browning degree data from aforementioned dried persimmons after 8 weeks was similar to that from dried persimmons slices. The decay rate of dried persimmons and dried persimmons slices after storage for 8 weeks were the highest (value=33.3%, 36.7%) in control, whereas that was the lowest (value=3.3%, 6.7%) under $SO_2$ pad 2.0 g/kg condition, respectively. The concentration of residual $SO_2$ in dried persimmons and dried persimmons slices were detected within a safe range of 15.3~30.0 ppm. Therefore, the shelf-life of dried persimmons and dried persimmons slices were lengthened in $SO_2$ treated pads (especially in $SO_2$ pad 2.0 g/kg) for inhibiting of browning and decay.