• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.3
• /
• pp.38-46
• /
• 2012

Atrial fibrillation is needed to be detected at paroxysmal stage and to be treated. But, paroxysmal atrial fibrillation ECG is hardly obtained with 12-lead electrocardiographs but Holter systems. Presently, the averaged beat subtraction(ABS) method is solely used to estimate atrial fibrillatory waves even with somewhat large residual error. As an alternative, in this study, we suggested an ESAF(event-synchronous adaptive filter) based algorithm, in which the AF ECG was treated as a primary input and event-synchronous impulse train(ESIT) as a reference. And, ESIT was generated so to be synchronized with the ventricular activity by detecting QRS complex. We tested proposed algorithm with simulated AF ECGs and real AF ECGs. As results, even with low computational cost, this ESAF based algorithm showed better performance than the ABS method and comparable performance to algorithm based on PCA(principal component analysis) or SVD(singular value decomposition). We also proposed an expanded version of ESAF for some AF ECGs with multi-morphologic ventricular activities and this also showed reasonable performance. Ultimately, with Holter systems including our proposed algorithm, atrial activity signal can be precisely estimated in real-time so that it will be possible to calculate atrial fibrillatory rate and to evaluate the effect of anti-arrhythmic drugs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.377-384
• /
• 2009

The purpose of this study is to investigate the residual fluoride concentration of fluoride tape in oral cavity which made by spraying NaF on carboxymethylcellulose base. After 1, 3, 5, 7 hours and 1, 2, 3 days of applicating APF gel(60seconds $taste^{(R)}$, 1.23% APF gel, Group I), Fluoride varnish($CavityShield^{TM}$, 5% NaF, Group II) and Fluoride tape(SCMC-T-5, 5% NaF, Trial product, Group III) in oral cavity of 27 healthy adults in their twenties, the result of fluoride concentration in unstimulated whole saliva which measured by using fluoride sensitive electrode made up to following conclusion. 1. Until 7 hours after application in every group, it showed significantly higher fluoride concentration in saliva than baseline value but at 1, 2, 3 days after application, there were no significant differences between measurements and baseline value(p>0.05). 2. Until 7 hours after application at every time, mean fluoride concentration in saliva was higher in the order of Group II, I and III. 3. 1 hour and 3 hours after application, Group II revealed significantly higher fluoride concentration than Group III(p<0.05), but there were no significant differences between Group Ⅰ and Group III in every time.

• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.202-207
• /
• 2016

The effects of $SO_2$ generating pads ($SO_2$ 0, 0.5, 1, and 2 g/kg) on the quality of dried persimmons slices were investigated. The $SO_2$ generating pads for storage did not affect to weight, moisture loss rate, and soluble solid contents of dried persimmons. The color change(E) after storage for 12 weeks was the highest (value = 3.5) in control ($SO_2$ 0 g/kg), whereas that was the lowest (value = 2.6) under $SO_2$ 2 g/kg condition. When we measured the browning degree after 12 weeks, they showed O.D. 0.15, 0.14, 0.10, and 0.05 in serial dilution treated pads with $SO_2$ 0, 0.5, 1, and 2 g/kg, respectively. The decaying rate was the highest (9.0%) in control after 12 weeks storage, whereas it did not show any spoilage in $SO_2$ 2 g/kg treated condition for whole storage period. The concentration of residual $SO_2$ in dried persimmons was detected within a safe range of 3.3~97.0 ppm. Therefore, the shelf-life of dried persimmons was lengthened in $SO_2$ generating pads (especially in $SO_2$ 2 g/kg) for inhibiting of browning and decaying.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.79-87
• /
• 1997

Anti-reflective and anti-static double layered films were prepared on the VDT panel by sol-gel spin-coating method. Their electrical, opticla, and mechanical properties were investigated. The outer SiO2 film with low re-fractive index was coated over the inner ATO(Antimony-doped Tin Oxide)-SiO2 film which was prepared by mixing ATO sol with SiO2 at molar ratio of 68:32 to satisfy the interference condition of double layers. The heat treatment was conducted at 45$0^{\circ}C$ for 30 min where residual organics were completely removed. The sheet resistance of ATO single layer showed the minimum value of 6$\times$107$\Omega$/$\square$ at 3 mol% addition of Sb and that of SiO2/ATO-SiO2 increased slightly with increasing SiO2 mol% up to 30 mol%, and then increased steeply to the value of 3$\times$108$\Omega$/$\square$ at 32 mol%. The reflectance of double layered films was about 0.64% at the wavelength of 550nm and the transmittance increased about 3.20%. The hardness of double layered films was almost the same as that of uncoated VDT panel, 471.4kg.f/mm2.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.227-235
• /
• 2018

In this study, we developed a relational formula for observing high - resolution rainfall using vehicle rain sensor. The vehicle rain sensor consists of eight channels. Each channel generates a sensor signal by detecting the amount of rainfall on the windshield of the vehicle when rainfall occurs. The higher the rainfall, the lower the sensor signal is. Using these characteristics of the sensor signal generated by the rain sensor, we developed a relational expression. In order to generate specific rainfall, an artificial rainfall generator was constructed and the change of the sensor signal according to the variation of the rainfall amount in the artificial rainfall generator was analyzed. Among them, the optimal sensor channel which reflects various rainfall amounts through the sensitivity analysis was selected. The sensor signal was generated in 5 minutes using the selected channel and the representative values of the generated 5 - minute sensor signals were set as the average, 25th, 50th, and 75th quartiles. The calculated rainfall values were applied to the actual rainfall data using the constructed relational equation and the calculated rainfall amount was compared with the rainfall values observed at the rainfall station. Although the reliability of the relational expression was somewhat lower than that of the data of the verification result data, it was judged that the experimental data of the residual range was insufficient. The rainfall value was calculated by applying the developed relation to the actual rainfall, and compared with the rainfall value generated by the ground rainfall observation instrument observed at the same time to verify the reliability. As a result, the rain sensor showed a fine rainfall of less than 0.5 mm And the average observation error was 0.36mm.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.65-72
• /
• 2003

Adsorption and desorption characteristics of methyl iodide at high temperature conditions up to 25$0^{\circ}C$ by TEDA-impregnated activated carbon and silver-ion exchanged zeolite(AgX-10), which are used for radioiodine retention in nuclear facility, were experimentally evaluated. In the range of temperature from 3$0^{\circ}C$ to 25$0^{\circ}C$, the adsorption capacity of base activated carbon decreased sharply with increasing temperature but that of TEDA-impregnated activated carbon showed higher value even at high temperature ranges. Especially, the residual amount of methyl iodide after desorption on TEDA-AC represented 30% lower value than that on AgX-10. However, it can be used as an adsorbent for the removal of methyl iodide up to 15$0^{\circ}C$ if it is preventing explosion by Ignition. The breakthrough curves of methyl iodide in the fixed bed packed with AgX-10 uP to 40$0^{\circ}C$ were compared upon the effects of bed temperatures, bed depth and input concentration of methyl iodide. Removal mechanism of methyl iodide on AgX-10 was proposed, based on the analysis of by-product gas generated from adsorption reaction.

• Journal of Korean Society of Transportation
• /
• v.31 no.2
• /
• pp.60-68
• /
• 2013

This study developed plural gravity models and their application method in order to increase the accuracy of trip distribution estimation. The developed method initially involves utilizing the coefficient of determination ($R^2$) to set the target level. Afterwards, the gravity model is created, and if the gravity model's coefficient of determination is satisfactory in regards to the target level, the model creation is complete and future trip distribution estimation is calculated. If the coefficient of determination is not on par with the target level, the zone pair with the largest standardized residual is removed from the model until the target level is obtained. In respect to the model, the removed zone pairs are divided into positive(+) and negative(-) sides. In each of these sides, gravity models are made until the target level is reached. If there are no more zone pairs to remove, the model making process concludes, and future trip distribution estimation is calculated. The newly developed plural gravity model and application method was adopted for 42 zone pairs as a case study. The existing method of utilizing only one gravity model exhibited a coefficient of determination value ($R^2$) of 51.3%, however, the newly developed method produced three gravity models, and exhibited a coefficient of determination value ($R^2$) of over 90%. Also, the accuracy of the future trip distribution estimation was found to be higher than the existing method.

• Applied Biological Chemistry
• /
• v.39 no.2
• /
• pp.140-146
• /
• 1996

Imidacloprid and a series of the related compounds were synthesized, and influence of 3-N substituents(R) on the insecticidal activities against Brown plant hopper(Nilaparvata lugens) and Green peach aphid(Myzus persicae) were examined quantitatively from the structure-activities relationships(Shh) techniques. The results indicated that the molecular hydrophobicity$({\pi})$ and inductive substituent constant$({\sigma}^{\ast})$ of substituents(R) at 3-nitrogen position on the imidazolidine ring were important factors. Variations in the potency were parabolically related to the both constants. In case of Brown plant hopper, optimum value of ${\pi}$ constant was 0.52, whereas the value of ${\sigma}^{\ast}$ constant against Green peach aphid was 1.17, respectively. Among them, the strong electron withdrawing groups$({\sigma}^{\ast}>0)$ such as methyl and benzenesulfonyl group(7 & 8) showed lower insecticidal activity and non-substituted, 1(imidacloprid) showed the best insecticidal activity. It seems that the intramolecular associated(H-bond) form between 2-N-nitro group and 3-imid group may contribute to the higher insecticidal activity to the both sucking insects. And in aqueous solution, 1 showed higher residual activity below pH 6.0, and the half-life$(T_{1/2})$ was about 6 month at pH 7.0 $(ca.\;k_{obs.}:5{\times}10^{-8}sec.^{-1})$ and $45^{\circ}C$.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.3
• /
• pp.210-216
• /
• 2007

The cadmium (Cd) and zinc (Zn) contamination of soils and cultivated crop plants by zinc smelting activities was studied. In the study area of the vicinity of ${\triangle}{\triangle}$ zinc smelting factory in Korea, soils and corn plants were sampled at corn harvesting stage and analyzed Cd and Zn concentration as well as Cd and Zn fraction and chemical properties in soils. At 600 m radius of studied area, Cd and Zn were highly accumulated in the surface soils (0 - 20 cm) showed greater than the Korean warning criteria (Cd 1.5, Zn 300 mg $kg^{-1}$) with corresponding values 1.7 and 407 mg $kg^{-1}$, respectively. The leaf part gave higher Cd concentration with the corresponding value of 9.5 mg $kg^{-1}$ as compared to the stem and grains pare (1.6 and 0.18 mg $kg^{-1}$), respectively. Higher Zn concentration was also obtained from the leaf part of the corn plant which gave the value of 1,733 mg $kg^{-1}$. The stem and grain part gave corresponding values of 547 and 61 mg $kg^{-1}$. The order of the mean Cd concentration in fractions is F3 (oxidizable fraction) > F2 (reducible fraction) > F4 (residual fraction) > F1 (exchangeable + acidic fraction). A highly positive correlation is observed between F2 and concentration of Cd and Zn in both plant pare, leaf and grain. Highly positive correlations are shown in the pH exchangeable Ca and Mg, and CEC when correlated with Cd and Zn bound to F4 fractions. To reduce Cd and Zn uptake by corn plant in an arable land heavily contaminated with Cd and Zn as affected by smelting factory, an efficient and effective soil management to increase soil pH and CEC is thus recommended.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.974-981
• /
• 1997

A combined treatment of high hydrostatic pressure and carbonation was used to inactivate pectinesterase (PE) and sterilize microorganisms in Valencia orange juice without major changes in its nutritive components. Quality characteristics of Valencia orange juice, such as microorganisms, PE activity, vitamin C content and color, were evaluated after it was treated with pressure, carbonation-and-pressure, and heat. Quality changes during storage at $4^{\circ}C$ and $30^{\circ}C$ after the treatments were also investigated. Pressurized orange juice (pressurized at 600 MPa for 10 min at $20^{\circ}C$) showed 7.0% residual PE activity, while the carbonated-and-pressurized orange juice (207 $kPa-CO_2$ gas pressure, pressurized at 600 MPa for 10 min at $20^{\circ}C$) showed 0%. Pressurization at 400 MPa or higher decreased the population of microorganisms in the orange juice to less than 10 CFU/mL. Carbonated-and-pressurized orange juice showed slight decrease in vitamin C content when stored at both $4^{\circ}C\;and\;30^{\circ}C$. While heat-treated ($90^{\circ}C$ for 60 sec) orange juice showed 75% decrease in vitamin C content when stored at $30^{\circ}C$. L value (lightness) and b value (yellowness) of carbonated-and-pressurized orange juice were higher than those of heat-treated orange juice when they were stored at $4^{\circ}C$ for 30 days.