• Corrosion Science and Technology
• /
• v.11 no.4
• /
• pp.151-156
• /
• 2012

The cavity formed by the ultrasonic generation in the fluid with the application of water cavitation peening collides into the metal surface. At this time, the surface modification effect such as the work hardening presents by the compressive residual stress formed due to the localized plastic deformation. In this investigation, the water cavitation peening technology in the distilled water with the lapse of time was applied to 5052-O aluminum alloy for aluminum ship of a high value. So, the optimum water cavitation peening time on the effect for surface hardening and anti-corrosion property was investigated. Consequently, the water cavitatin peening time on excellent hardness and corrosion resistance characteristic presented 3.5 min. and 5.0 min, respectively. The surface hardness in the optimum water cavitation peening time was improved approximately 45% compared to the non-WCPed condition. In addition, corrosion current density was decreased.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.373-380
• /
• 1993

A five mirror system with a reduction magnification(M=+1/5) is designed for DUV optical lithography. Initially, numerical solutions of all zero 3rd order aberrations and zero 5th order spherical aberration are obtained for the spherical mirror system. Next, by the optimization method, the aspherization is carried out to the two spherical mirrors to obtain a system that has as less residual aberrations, higher NA and improved MTF as possible. We have finally obtained the system of which NA is 0.45 and the resolution is about 500 cycles/mm at the 50% MTF value criterion and the depth of focus of $1.0{\mu}m$ for the nearly incoherent illumination$({\sigma}=1.0)$ and the wavelength of 0.248 m(KrF excimer laser line).

• Nuclear Engineering and Technology
• /
• v.33 no.6
• /
• pp.638-651
• /
• 2001

The present study is to assess the applicability of the best-estimate thermal-hydraulic code, MARS 1.4, for the analysis of thermal-hydraulic behavior in PWRs during natural circulation conditions. The code simulates a natural circulation test, BETHSY test 4. la, which was conducted on the integral test facility of BETHSY. The test represented the cooling states of the primary cooling system under single-phase natural circulation, two-phase natural circulation and the reflux condensation mode with conditions corresponding to the residual power, 2% of the rated core power value and 6.8 MPa at the secondary system. Based on MARS 1.4 calculations, the major thermal-hydraulic behaviors during natural circulation are evaluated and the differences between the experimental data and calculated results are identified. The calculated results show generally good behavior with regard to the experimental results; the region of single-phase natural circulation is 100-92% of the initial mass inventory, two-phase natural circulation is 84-63 %, and the reflux condensation mode occurred below 58 %. U-tubes empty and the core uncovery are obtained at 39 % and 34 % of the initial mass inventory, respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.53-57
• /
• 2007

In this paper, the intelligent estimation algorithm is developed for residual quantity estimate of lithium secondary cell and we suggest the control algorithm to get battery SOC through thermal modeling of electric cell. Lithium secondary cell gives cycle life, charge characteristic, discharge characteristic, temperature characteristic, self-discharge characteristic and the capacity recovery rate etc. Therefore, we make an accurate estimate of the capacity of battery according to thermal modeling to know the capacity of electric cell that is decreased by various special quality of lithium secondary cell. And we show effectiveness through comparison of value as result that use simulation and fuzzy logic.

• Korean Journal of Veterinary Research
• /
• v.7 no.2
• /
• pp.13-18
• /
• 1967

1. Within experimental chromatin, the total protein: DNA ratio did not vary in the same organs of control and irradiated rats. However, the amount of RNA and total protein associated with the DNA varied considerably among the different types of chromatin. In particular, the content of chromatin was the control tissue. RNA and total protein ratio of chromatins from brtain, liver, testis and spleen declined with experimental I organs. 2. There was the same quantitative relationship between the amount of RNA and the amount of histone-protein associated with DNA in chromatin. 3. RNA: DNA ratio of chromatin showed 1.5-2 times increas in the irradiated organs except brain. However, RNA: DNA ratio was decreased in chromatin by irradiation. 4. Histone-protein:residual protein ratio was greatly varied among the organs. However, the effect was not found by irradiation. 5. Priming activity of chromatin showed a higher value in testis and the activity was greater in organs with higher metabolic activity: 6. Inhibition of Actinomycin D is observable in chromatin from testis, liver, spleen and brain declined without relationship between irradiated and non-irradiated conditions. Ammonium sulfate showed increased priming activity by the electrostatic dissociation of DNA and histone in chromatin on the stimulation depending on property of chromatins. 7. It is suggested that the results support a proposal that testis and spleen of highly sensitive to irradiation should an increase in the priming activity whereas brain and liver of lower sensitivity decreased in the activity.

• Journal of the Korean Ceramic Society
• /
• v.44 no.6 s.301
• /
• pp.313-318
• /
• 2007

ITO (Indium-tin oxide) thin films have been prepared by a sol-gel spinning coating method and fired and annealed in the temperature range of $450-600^{\circ}C$. The XRD patterns of the films indicated the main peak of (222) plane and showed higher crystallinity with increasing an annealing temperature. The surface of the ITO thin films were treated with 0.1 N HCl 20% solution at room temperature. The effects of surface treatment on electrical properties and surface morphologies of the ITO films were investigated with the results of sheet resistance and FE-SEM, AFM images. The samples, subsequently treated with acidic solution for 40 sec showed the sheet resistance of $0.982\;k{\Omega}/square$. The surface treatment using acidic solution diminished the RMS (root mean square) value and the residual carbon content of the ITO films. It seemed that the acid-cleaning of the ITO thin films lead to the decrease of surface roughness and sheet resistance.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.6
• /
• pp.861-868
• /
• 2010

This study explored an extended three-dimensional Fitts' law that is more suited for the pointing task than the conventional Fitts' law. The experiments were conducted under the manipulation of the distance to the target, size of the target, and direction of the target's location that can be described by two angles, $\theta1$ and $\theta2$. Considering the starting point as the center of coordinates, $\theta1$ is the angle between the positive z-axis and the target location and $\theta2$ is the angle between the positive y-axis and the projected target location on the x-y plane. From the experimental results, we confirmed that all four variables significantly affect the movement time. As we extended the index of difficulty of the conventional Fitts' model by incorporating $\theta1$ and $\theta2$, we established an extended Fitts' model that showed better accordance with the empirical data than the conventional Fitts' model and 3D Fitts' law of Murata and Iwase, in terms of the $r^2$ and the standard error of the residual between the measured movement time and the predicted value.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.604-609
• /
• 2009

The antioxidative activities of the water solution of crude extract from edible mushroom enokitake Flammulina velutipes were compared with those of ascorbic acid and ascorbic acid 6-palmitate in oil-in-water (O/W) emulsions of cod liver oil. Oxidation of the emulsions was carried out at 40 and $50^{\circ}C$ in the dark. The antioxidant activities were measured by in vitro assay against oxygen uptake, 2-thiobarbituric acid value, hydroperoxide formation of the oils. Also, residual docosahexaenoic acid content was measured as indices of lipid oxidation. The cod liver oil in O/W emulsions with added enokitake crude extract (ECE) was significantly more stable against lipid oxidation than the control emulsions without the extract in terms of any oxidation indices used. Moreover, ECE provided remarkable antioxidative properties to eicosapentaenoic acid ethyl ester in emulsion system. These observations demonstrate that F. velutipes can be used as a natural antioxidant, which effectively prevents oxidation of polyunsaturated oils in emulsion system.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.99-100
• /
• 1993

Calorimetric (D.S.C) studies were carried out on the nylon 4,6 single crystals grown from 1,4-butanediol solution at various crystallisation temperatures, based on the assessment of the lamellar thickness by small angle x-ray scattering. Samples were annealed mainly ot get rid of residual solvents inside the crystals. The effect of annealing on the crystal perfection is inferred from the measured thermal properties of the crystals. Accordig to the scanning rates less than 80 K/min., D. S C. melting peaks indicate that changes in the internal morphology of nylon 4,6 crystals preapred at different crystallisation temeratures yield a thermodynamic melting temperature. Tm, of 319 $^{\circ}C$, for the infinitely extended crystal thickness (1/ι). The obtained heat of fusion value for the inginite crystal thickness, Ho, was 270 J/g from the plot of measured feat of fusion ($\Delta$Hm) vs. reciprocal crystal thickness (1/ι). based on these values, the fold surface energy, $\delta$e. of 65.4 erg/$\textrm{cm}^2$ was obtained from Hoffman-Waeeks equation. The thermodynamic melting temperature and heat of fusion of the infinite crystal thickness for the solution grow nylon 4,6 single crystals are found to be higher than of the reported corresponding solution grown nylon 6,6 single crystals. pbtained crystallinity from D. S. C measurements ranges from 40 to 50 %, which is close to the reported yalue for the nylon 6,6 single ctystals but lower than we expected.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.12
• /
• pp.607-613
• /
• 2001

Molybdenum thin films were deposited on the soda lime glass(SLG) substrates by direct-current planar magnetron sputtering, with a sputtering power density of $4.44W/cm^2$. The working pressure was varied from 0.5 mtorr to 20 mtorr to gain a better understanding of the effect of sputtering pressure on the morphology and microstructure of the Mo film. Thin films of $CU(InGa)Se_2$ (CIGS) were deposited on the Mo-coated glass by three stage co-evaporation process. The highest efficiency device was obtained at the maximum value of the tensive stress. The morphology of Mo-coated films were examined by using scanning electron microscopy The film's microstructure, such as the preferred orientation, the full width at half-maximum(FWHM), and the residual intrinsic stress were examined by X-ray diffraction.