• Communications for Statistical Applications and Methods
• /
• v.3 no.2
• /
• pp.275-282
• /
• 1996

A life distribution F with survival function $\overline{F}$=1-F, finite mean $\mu$ and mean residual life m(t) is said to be NBUE(NWUE) if m(t)$\leq$($\geq$) .$\mu$ for t$\geq$0. This NBUE property can equivalently be characterized by the fact that $\varphi$(u)$\geq$($\leq$)u for 0$\leq$u$\leq$1, where $\varphi$(u) is the scaled total-time-on test transform of F. A generalization of the NBUE properties is that there is a value of p such that $\varphi$(u)\geq.u$ for 0$\leq$u$\leq$p and $\varphi$(u)\leq$$\leq$u$\leq$1, or vice versa. This means that we have a trend change in the NBUE property. In this paper we point out an error of Klefsjo's paper (1988). He erroneously takes advantage of trend change point of failure rate to calculate the empirical test size and power in lognormal distribution. We solves the trend change point of mean residual lifetime and recalculate the empirical test size and power of Klefsjo (1988) in mocensoring case.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.179-184
• /
• 2019

In this paper, we propose a design method of Active Noise Control (ANC) that reduces perceived level of the residual noise. A FELMS (Filtered-E Least Mean Squares) algorithm is used for the ANC system and the NC (noise criteria) is applied as an evaluation criterion of the residual noise. With this structure, we present the allowable spectral shape of the noise shaping filter that minimizes the NC index within the effective operating frequency band of the ANC, and showed that the filter satisfying in the criterion has a lower NC value than the psychoacoustic-based filter used in the previous studies.

• Journal of Korean Dental Science
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2021

Purpose: The alveolar ridge preservation (ARP) is widely conducted for implant placement. However, experimental results using deproteinized porcine bone mineral (DPBM) have been scarce. This retrospective study evaluated factors affecting the primary stability of implants in an area where ARP was performed using DPBM. Materials and Methods: Thirty-eight patients were divided into two groups based on the primary stability, with torque value of 30 Ncm as borderline. To determine the factors that affect the primary stability of implants, we collected data from patients' medical records including age, sex, reentry time, socket location, remaining bone wall at the time of extraction, and type of collagen membrane, as well as from radiographs and histomorphometric analysis. Result: The results showed statistically significant difference for the remaining extraction socket wall (P=0.014), residual graft (P=0.029), and fibrovascular tissue (P=0.02) between the two groups. There was an insignificant tendency toward the time of reentry surgery (P=0.052) and location (P=0.077). All implants placed in sites using DPBM functioned well up to 3 years. Conclusion: Within the limitations of the present study, extraction socket wall, residual graft, and fibrovascular tissue can affect the primary stability at the time of implant placement on grafted sites using DPBM and collagen membranes. In addition, reentry time and locations can be considered. In future studies, comparative experiments in quantified models will be required to supporting the findings.

• Advances in nano research
• /
• v.12 no.4
• /
• pp.375-386
• /
• 2022

Synthesis of acrylate-based dispersion resins involves many parameters including temperature, ingredients concentrations, and rate of adding ingredients. Proper controlling of these parameters results in a uniform nano-size chain of polymer on one side and elimination of hazardous residual monomer on the other side. In this study, we aim to screen the process parameters via Internet of Things (IoT) to ensure that, first, the nano-size polymeric chains are in an acceptable range to acquire high adhesion property and second, the remaining hazardous substance concentration is under the minimum value for safety of public and personnel health. In this regard, a set of experiments is conducted to observe the influences of the process parameters on the size and dispersity of polymer chain and residual monomer concentration. The obtained dataset is further used to train an Adaptive Neural network Fuzzy Inference System (ANFIS) to achieve a model that predicts these two output parameters based on the input parameters. Finally, the ANFIS will return values to the automation system for further decisions on parameter adjustment or halting the process to preserve the health of the personnel and final product consumers as well.

• Journal of Surface Science and Engineering
• /
• v.34 no.5
• /
• pp.421-428
• /
• 2001

New WC-CrN superlattice film was deposited on Si substrate (500$\mu\textrm{m}$) using cathodic arc ion plating system. The microstructure and mechanical properties of the film depend on the superlattice period (λ). In the X-ray diffraction analysis (XRD), preferred orientation of microstructure was changed according to various superlattice periods(λ). During the Transmission Electron Microscope analysis (TEM), microstructure and superlattice period (λ) of the WC - CrN superlattice film was confirmed. Hardness and adhesion of the deposited film was evaluated by nanoindentation test and scratch test, respectively. As a result of nanoindentation test, the hardness of WC - CrN superlattice film was gained about 40GPa at superlattice period (λ) with 7nm. Also residual stress with various superlattice period (λ) was measured on Si wafer (100$\mu\textrm{m}$) by conventional beam-bending technique. The residual stress of the film was reduced to a value of 0.2 GPa by introducing Ti - WC buffer layers periodically with a thickness ratio ($t_{buffer}$/$t_{buffer+superlattice}$ ). To the end, for the evaluation of oxidation resistance at the elevated temperature, CrN single layer and WC - CrN superlattice films with various superlattice periods on SKD61 substrate was measured and compared with the oxidation resistance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.4
• /
• pp.515-521
• /
• 2020

Recently, data traffic has exploded due to development of various industries, which causes problems about losing of efficiency and overloaded existing networks. To solve these problems, network slicing, which uses a virtualization technology and provides a network optimized for various services, has received a lot of attention. In this paper, we propose a resource allocation method using credit value. In the method using the clustering technology, an operation for selecting a cluster is performed whenever an allocation request for various services occurs. On the other hand, in the proposed method, the credit value is set by using the residual capacity and balancing so that the slice request can be processed without performing the operation required for cluster selection. To prove proposed method, we perform processing time and balancing simulation. As a result, the processing time and the error factor of the proposed method are reduced by about 13.72% and about 7.96% compared with the clustering method.

• Korean Journal of Health Education and Promotion
• /
• v.13 no.2
• /
• pp.130-166
• /
• 1996

As compared with body height and body weight by ages and sexes, by means of the data reported under other researchers from 1967 to 1994 for 33 years, this study obtained the estimate value of body height and body weight by ages and sexes for the same period, and figured out prediction value of body height and body weight in the ages of between 6 and 14 from 1995 to 2000. These surveys and measurements took for one year from October 1st 1994 to September 30th. As shown in the 〈Table 1〉, in order to calculate the establishment, estimate value and prediction value of the chronological regression model of body height and body weight, by well-grounded 17 representative research papers, this research statistically tested propriety of liner regression model by the residual analysis in advance of being reconciled to simple liner regression model by the autonomous variable-year and the subordinate variable-body weight and measured prediction value, theoretical value from 1962 to 1994 by means of 2nd or 3rd polynomial regression model, with this redult did prediction value from 1995 to 2000. 1. Chronological Change of Body Height and Body Weight The analysis result from regression model of the chronological body height and body weight for the aged 6 - 16 in both sexes ranging from 1962 to 1994, corned from the 〈Table 2-20〉. On the one hand, the measurement value of respective researchers had a bit changes by ages with age growing, but the other hand, theoretical value, prediction value showed the regular increase by the stages and all values indicated a straight line on growth and development with age growing. That is, in case of the aged 6, males had 109.93cm in 1962 and females 108.93cm, but we found the increase that males had 1I8.0cm, females 1I3.9cm. In theoretical value, prediction value, males showed the increase from 109.88cm to 1I7.89cm and females from 109.27cm to 1I5.64cm respectively. There was the same inclination toward all ages. 2. Comparision to Measurement Value and Prediction Value of Body Height and Body Weight in 1994 As shown in the 〈Table 21〉, in case of body height, measurement value and prediction value of body height and body weight by ages and sexes almost showed the similiar inclination and poor grade, in case of body weight, prediction value in males had a bit low value by all ages, and prediction value in females had a high value in adolescence, to the contrary, a low value in adult. 3. Prediction Value of Body Height and Body Weight from 1995 to 2000 This research showed that body height and body weight remarkably increased in adolescence but slowly in adult. This study represented that Korean physique was on the increase and must be measured continually hereafter.

• Geomechanics and Engineering
• /
• v.22 no.3
• /
• pp.237-244
• /
• 2020

To achieve a wide suction range, the low suction was imposed on compacted silt specimens by the axis translation technique and the high suction was imposed by the vapor equilibrium technique with saturated salt solutions. Firstly, the results of soil water retention tests on compacted silt show that the soil water retention curves in terms of gravimetric water content versus suction relation are independent of the dry density or void ratio in a high suction range. Therefore, triaxial tests on compacted silt with constant water content at high suctions can be considered as that with constant suction. Secondly, the results of triaxial shear tests on unsaturated compacted silt with the initial void ratio of about 0.75 show a strain-hardening behavior with a slightly shear contraction and then strain-softening behavior with an obviously dilation. As the imposed suction increases, the shear strength increases up to a peak value and then decreases when the suction is beyond a special value corresponding to the peak shear strength. The residual strength increases to fair value and those at high suctions are almost independent of imposed suctions. In addition, the contribution of suction to the strength of compacted silt would not diminish even in a high suction range.

• Molecular & Cellular Toxicology
• /
• v.1 no.3
• /
• pp.157-163
• /
• 2005

Because of their widespread occurrence and substantial biological activity, halogenated aromatic hydrocarbons are one of the important classes of contaminants in the environment. We have performed comparative molecular field analysis (CoMFA) on structurally diverse ligands of Ah (dioxin) receptor to explore the physico-chemical requirements for binding. All CoMFA models have given $q^{2}$ value of more than 0.5 and $r^{2}$ value of more than 0.83. The predictive ability of the models was validated by an external test set, which gave satisfactory predictive $r^{2}$ values. Best predictions were obtained with CoMFA model of combined modified training set ($q^{2}=0.631,\;r^{2}=0.900$), giving predictive residual value = 0.002 log unit for the test compound. We have suggested a model comprises of four structurally different compounds, which offers a good predictability for various ligands. Our QSAR model is consistent with all previously established QSAR models with less structurally diverse ligands. The implications of the CoMFA/QSAR model presented herein are explored with respect to quantitative hazard identification of potential toxicants.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.19-24
• /
• 1992

Formula feed for fattening cattle ground through 2 mm screen was incubated in the rumen of sheep and goats to evaluate effects of ratio of concentrate to hay and kinds of hay in a ration on determining the degradability (dg) value of protein using in sacco technique. Following results were obtained: 1) Residual dry matter (DM) and crude protein (CP) of formula feed decreased as the time of incubation increased. Regression analyses showed that rates of degradation of DM and CP in the rumen were not the same when they were determined under feeding of rations with different percentages of concentrate. 2) Rate of passage of digesta from the rumen differed between feeding of Italian ryegrass hay ration and that of alfalfa hay ration, but was not influenced by the percentage of concentrate in a ration. 3) The dg value was different when it was estimated with results obtained from determinations under feeding of Italian ryegrass hay ration or that of alfalfa hay ration. The percentage of concentrate in a ration had no influence on the dg value of protein in formula feed.