• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.5
• /
• pp.20-25
• /
• 2009

Residual extractives had a noticeable impact on the brightness of unbleached hardwood kraft pulps (trembling aspen). The brightness-impacting extractives were effectively removed by oxygen delignification. In addition, oxygen delignification was more effective in removing chromophores in hardwood unbleached kraft pulps than in those of softwood (loblolly pine). The residual extractives in unbleached hardwood kraft pulps also affected the pulp color, primarily redness and the L value. These redness-related extractives in unbleached hardwood kraft pulps were also effectively removed by oxygen delignification. There were no significant color differences between untreated and solvent-extracted oxygen-delignified aspen kraft pulps. The residual extractives in unbleached and oxygen-delignified softwood (loblolly pine) kraft pulps did not have a significant impact on either brightness or pulp color.

• Architectural research
• /
• v.10 no.2
• /
• pp.37-42
• /
• 2008

This study is to get the proper evaluation of the residual property of reinforced concrete beam exposed to fire. This study focused on the strength resistance and analytical evaluation of RC members exposed high temperature. And this study is the basis analytical research to conduct the other studies. To analysis by the finite element method, the Total-RC program was used to analysis it and the Total-Temp program was also used to analysis the temperature distributions at the section. All of results were compared with the pre-existing experimental data of simple supported beam. Using it, the parameters influencing the structural capacity of the high temperature-damaged RC members and residual strength estimation are investigated. The temperature distribution and the structural capacity at the section are calculated in this step. An application of this method is compared with the heating test result and residual property test for simple supported beam which is subjected to ISO 834 test fire. The results of this study are as follows; 1) The loads-displacement relationship of RC beam, considering initial thermal stress of cross section and heat transfer analysis are estimated comparing analytical value with pre-existing experimental results. 2) by the heating time (0, 1, 2 hours), the results of analysis with parameters show that the load capacity exposing at fire is affected.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.305-313
• /
• 2009

This paper provides a method for evaluating a residual life of water mains using a proportional hazard model(PHM). The survival time of individual pipe is defined as the elapsed time since installation until a break rate of individual pipe exceeds the Threshold Break Rate. A break rate of an individual pipe is estimated by using the General Pipe Break Model(GPBM). In order to use the GPBM effectively, improvement of the GPBM is presented in this paper by utilizing additional break data that is the cumulative number of pipe break of 0 for the time of installation and adjusting a value of weighting factor(WF). The residual lives and hazard ratios of the case study pipes of which the cumulative number of pipe breaks is more than one is estimated by using the estimated survival function. It is found that the average residual lives of the steel and cast iron pipes are about 25.1 and 21 years, respectively. The hazard rate of the cast iron pipes is found to be higher than the steel pipes until 20 years since installation. However, the hazard rate of the cast iron pipes become lower than the hazard rates of the steel pipes after 20 years since installation.

• Fisheries and Aquatic Sciences
• /
• v.8 no.1
• /
• pp.10-16
• /
• 2005

Conditions for sufficient and rapid distribution of a cryoprotectant (sorbitol solution) into intact fish muscle (Oncorhynchus mykiss) were studied as changing in the residual Ca2+ ATPase activity during freeze/thaw cycling. Chunks of the fish muscle were immersed in 4 concentrations of sorbitol solutions ($20\%$, $30\%$, $45\%$, and $60\%$) by a shaker mechanism at 5$^${circ}C. Whole immersion samples (W) showed a higher value of the residual Ca2+ ATPase activity than those in the untreated controls (C), except in the treated controls (TC), while less effect of immersion concentration could be found. Comparing the extent of penetration of sorbitol into the surface layer to inner layer of immersed fish chunks, outer portion samples achieved excellent cryoprotection with $100\%$ of the residual ATPase activity values or more. For the inner portion samples, $30\%$ and $45\%$ sorbitol solution treatments indicated a higher ATPase activity than $60\%$ treatment. At high concentrations, mass transfer rates during osmotic dehydration might berapid and it causes faster surface drying by dewatering at surface solute layer. Periodically immersed and relaxed samples, W (5-3-1), led to good cryoprotection effect: W (5-3-1) indicated high residual Ca2+ ATPase activity values and the residual ATPase activity values excess $100\%$ in immersion of $30\%$ and $45\%$ sorbitol solutions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.6
• /
• pp.463-499
• /
• 2011

Control of ground water is one of the most important factors for long-term operation of tunnel because most tunnels are located under the ground water level. In case of a drainage tunnel, there is no pore water pressure on the lining when the drainage system is properly working. After long-term operation, however, residual pore water pressure can be developed on the lining due to the deterioration of the drainage system. In this study, the water pressure distribution under obstruction condition of drainage material and conduit on the tunnel is numerically investigated using the ICFEP program and compared with the current value being applied to the residual water pressure for rational application plan of residual water pressure on the tunnel linings.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.248-261
• /
• 1999

The fatigue life of mechanical components and structures has been influenced by mechanical, material and environmental conditions. It is important to search out the load type and size for accurate cause of fracture at the damaged surface of material. The fractographic method by x-ray diffraction can utilize residual stress $\sigma$_r and half-value breadth B and find out the types and the mechanical conditions of fracture. This study showed the relationship between fracture mechanical parameters $\Delta$K, $K_{max}$ and X-ray residual stress $\sigma$_r for normalized SS41 steel with homogeneous crystal structure and M.E.F. dual phase steel(martensite encapsulated islands of ferrite). The fatigue crack propagation tests were carried out under stress ratios 0.1 and 0.5. The x-ray diffraction technique according to crack propatation direction was applied to fatigue fractured surface. Residual stress $\sigma$_r was independent on stress ratios by arrangement of $\Delta$K. The equation of $\sigma$_r$\Delta$K was established by the experimental data. Therefore, fracture mechanical parameters can be estimated can be estimated by the measurement of X-ray parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.955-960
• /
• 2009

In this paper, we propose a novel approach to residual echo suppression (RES) algorithm based on tracking echo-presence uncertainty (TEPU) to improve the performance of acoustic echo suppression (AES) in the frequency domain. In the proposed method, the ratio of the microphone input and the echo-suppressed output signal power is employed as the threshold value for the decision rule to estimate the echo-presence uncertainty applied to the RES filter. The proposed RES scheme estimates the echo presence uncertainty in each frequency bin and effectively reduces residual echo signal in a simple fashion. The performance of the proposed algorithm is evaluated by the objective test and yields better results compared with the conventional schemes.

• Journal of Welding and Joining
• /
• v.17 no.6
• /
• pp.53-61
• /
• 1999

The use of thick plate in increasing in recent years due to the rapid expansion of chemical plants, nuclear plants, ships and other industrial plants. Welding is the most popular joining techniques employed in manufacturing industrial machineries and structures. Normally, Groove shapes are prepared according to appropriate rules and regulations such as KS, JIS, AWS, LR, DNV and etc. for various thicknesses of plate. However those groove angles tend to be too large. As a result of large groove angle, residual stress, deformation of material and strength reduction is obtained. Therefore, the reliability and safety of structures and machinery tend to be decreasing. Therefore, in this paper, theoretical as well as experimental study are carried out to find optimum groove shapes for T-welded joint of mild steel. The test specimen are made in same condition with simulation model. Welding residual stresses measurement by sectional cutting method. ⅰ) The mechanical difference for change the thickness of plate and groove angle are not appeared. ⅱ) In a mechanical point of view minimum preparation angle(40°) is more suitable than maximum groove angle(60℃). ⅲ) The measurement value and distribution of welding residual stresses are not effected largely by groove angle. It is mechanical restraint that mainly affect welding residual stresses distribution. In mechanical point of view minimum groove angle is more suitable than maximum groove angle. Therefore, it is appropriate to minimize the size of groove shape in strength and safety.

• Advances in Traditional Medicine
• /
• v.6 no.2
• /
• pp.102-107
• /
• 2006

The methanol extract and residual methanol fraction of Excoecaria agallocha L. (Euphorbiaceae) stem bark was investigated in this study by wheat rootlet and shoot growth inhibition, and antimicrobial bioassay. The methanol extract and residual methanol fraction showed high inhibitory effect on both the wheat rootlet (82-89%) and shoot growth (85-90%) compared to control. The methanol extract showed a better and dose related inhibition on both the rootlet and shoot growth compared to residual methanol fraction. The $IC_{50}$ value of methanol extract for rootlet and shoot were $2.88\;{\mu}g/ml$ and $2.32\;{\mu}g/ml$, and of residual methanol fraction for rootlet and shoot were $7.91\;{\mu}g/ml$ and $4.45\;{\mu}g/ml$. The methanol extract and residual methanol fraction did not show any antibacterial activity against the tested microorganisms of clinical isolates Escherichia coli, Staphylococcus aureous, Pseudomonas aeruginosa, Proteus vulgaris and Bacillus subtilis. The plant has the potential to be a source of novel cytotoxic compound(s).

• Journal of the Korean Geotechnical Society
• /
• v.21 no.7
• /
• pp.63-72
• /
• 2005

Grounwater level applied on dredged and reclaimed clay layer was assumed to be the same value under design criterion as field test one, but actually differences are found through the monitoring test. In this study, a case study of measuring residual groundwater level is performed in ground improvement construction of Gwangyang container terminal and hinterland. With priority given to residual groundwater level measured during construction and management period of 9 years, it is investigated that residual groundwater level (R. GWL) could be applied reasonably to the design, construction, and use stages of the container harbor and land development.