• Journal of Korea Foundry Society
• /
• v.2 no.2
• /
• pp.10-17
• /
• 1982

This study has been carried out to determine the change of mechanical properties and microstructures by the heattreatment to relieve the residual stresses for gray cast irons. The results have been obtained from the experiment as follows; 1) The annealing above $600^{\circ}C$ for the stress relieving of gray cast iron decrease the tensile strength and hardness 2) The decrease reates of tensile strength and hardness of gray cast iron after annealing above $600^{\circ}C$ are increased with increasing the holding time. 3) The gray cast iron containing the elements of Mn, Cr has increased the heating temperature for the decrease of tensile strength and hardness. 4) The decrease of mechanical properties by annealing are assumed that the formation of ferrite takes placed from the decomposition of eutectoid cementite in the matrix.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.8
• /
• pp.23-31
• /
• 2015

This paper proposes an advanced distance relaying based on the DC offset removal filter to minimize the effects of DC offset on a double circuit transmission line. The proposed DC offset removal filter uses only one cycle of data for phasor extraction computation, which does not need to preset the time constant of the DC offset component. This proposed distance relaying uses not only the residual current of the faulted circuit but also mutual current of the healthy adjacent circuit. A series of off-line test results using ATP simulation data show the effectiveness of the an advanced distance relaying.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1724-1725
• /
• 2007

This paper presents a fault detection and isolation(FDI) scheme for a nonlinear systems with a actuator and sensor faults. A residual generator based on the observer model generate the information for a fault detection. The proposed fault estimators are activated for a fault isolation and applied to estimate the time-varying lumped faults(model uncertainty + fault). but a fault estimator error dose not converge to zero since the derivative of lumped fault is not zero. Then the fuzzy neural network(FNN) is used to estimate the fault estimator error. Simulation results are presented to illustrate the effectiveness and the applicability of the approaches proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10B
• /
• pp.862-875
• /
• 2003

본 논문에서는 IEEE 802.11 규격을 기반으로 다중 홉 Ad Hoc 모드에서 비실시간 및 실시간 트래픽에 대한 통합 서비스를 지원하는 Wireless LAN을 구성할 때, 분산 방식으로 실시간 서비스의 우선권을 고려한 채널 액세스의 차별화를 제공할 수 있는 매체접근제어(Medium Access Control: MAC) 프로토콜의 구현 방안을 제안한다. 이를 위해 실시간과 비실시간 트래픽의 Contention Window (CW)를 서로 분리하며, 실시간 서비스의 지연 바운드에 따라 정해진 잔여 수명(residual time)을 우선권 설정에 반영함으로써 실시간 트래픽의 지연 요구 사항을 보장할 수 있도록 한다. 또한 실시간 트래픽의 부하에 따라서 적응적으로 offset 값을 조정함으로써 offset에 의해 발생될 수 있는 수율의 저하를 최소화한다. 제안된 방식은 기존 IEEE 802.11 MAC 규격의DCF (Distributed Coordination Function) 방식을 그대로 사용하면서 CSMA/CA 기반의 경쟁 방식을 통해서도 비실시간 트래픽과의 차별화가 가능하고, 또한 잔여 수명 시간을 고려한 동적인 우선권 할당이 가능하도록 하였다. 시뮬레이션에 의한 분석 결과에 따르면 기존 DCF와 비교할 때 실시간 단말의 용량을 2배까지 향상시킬 수 있으며, 트래픽 부하에 따라 적응적 제어를 통해 추가적인 성능 개선 효과를 확인하였다.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.4
• /
• pp.268-275
• /
• 1993

The whole cells of Actinoplanes missouriensis KCTC 1780 which produce glucose isomerase was immobillized by flocculation method for the effective production of high fructose syrup using packed-bed bioreactor system. Among the flocculation methods used In this study, the glucose Isomerase activity of flocculated cells using 5% polyethylenimmine and 0.2% glutaraldehyde was the highest as 46.3 unit, and the flocculant was 10.3g(wet weight) per 100m1 of broth, and the residual activity was 92.5%. In the batch operation of glucose isomerization using the flocculated cells, the optimum pH, temperature and isomerization ratio were 7.0, 75$^{\circ}C$ and 31%, respectively. The optimum concentration of Mg2+ which was activator on the glucose isomerization of flocculated cells was 0.1M, and glucose isomerase activity was increased by about 40% compared to none of Mg2+. In the packed-bed bioreactor system with 1.2 hour of residence time at 7$0^{\circ}C$, the reaction stability maintained until 96 hour without toss of activity, and the equilibrium was kept up to 120 hours of the operation.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1320-1330
• /
• 2017

Wireless sensor networks for forest monitoring are typically deployed in fields in which manual intervention cannot be easily accessed. An interesting approach to extending the lifetime of sensor nodes is the use of energy harvested from the environment. Design constraints are application-dependent and based on the monitored environment in which the energy harvesting takes place. To reduce energy consumption, we designed a power management scheme that combines dynamic duty cycle scheduling at the network layer to plan node duty time. The dynamic duty cycle scheduling is realized based on a tier structure in which the network is concentrically organized around the sink node. In addition, the multi-paths preserved in the tier structure can be used to deliver residual packets when a path failure occurs. Experimental results show that the proposed method has a better performance.

• Structural Engineering and Mechanics
• /
• v.67 no.2
• /
• pp.143-153
• /
• 2018

Thermal buckling of nonlocal flexoelectric nanoplates incorporating surface effects is analyzed for the first time. Coupling of strain gradients and electrical polarizations is introduced by flexoelectricity. It is assumed that flexoelectric nanoplate is subjected to uniform and linear temperature distributions. Long range interaction between atoms of nanoplate is modeled via nonlocal elasticity theory. The residual surface stresses which are usually neglected in modeling of flexoelectric nanoplates are incorporated into nonlocal elasticity to provide better understanding of the physic of problem. A Galerkin-based approach is implemented to solve the governing equations derived from Hamilton's principle are solved. The verification of obtained results is performed by comparing buckling loads of flexoelectric nanoplate with previous data. It is shown that buckling loads of flexoelectric nanoplate are significantly affected by thermal loading type, temperature change, nonlocal parameter, surface effect, plate thickness and boundary conditions.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.11
• /
• pp.1115-1118
• /
• 2000

Specimens were cured by using a 1 mm (thickness) ${\times}$5 mm (diameter) teflon mold, and were immersed in artificial saliva and in 75% ethanol for 1, 7, 14, 21 and 28 days in order to quantify and to identify toxic components and to determine any degra dation byproducts of Bis-GMA that might be released from five commercially available resin-based dental sealants. In artificial saliva, the only released component was triethylene glycol dimethacylate (TEGDMA). In 75% ethanol, TEGDMA, 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy) phenyl]propane (Bis-GMA) and urethane dimethacrylate (UDMA) were released highly at the initial stage, indicating that the amount of component released is not linearly correlated with the immersion time. The amount of released TEGDMA was found to be much higher in 75% ethanol than in artificial saliva. Importantly, bisphenol-A (BPA) was detected from all the uncured sealants tested, suggesting that all the sealants tested contain BPA as a contaminant.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.19
• /
• pp.31-37
• /
• 1989

The recursive residuals are obtained by the iterative processes as descrbed in section 2. They may require more efforts and time to compute and may face difficultie in ordering of data. But we can investigate each case to be deleted and gather more informations on each case. The recursive residuals are much more effective with conjecture of cusum technique. We suggest to use the predicted residual for the construction of recursive residuals in nonlinear regression models. The assessment of influence and leverage by the connection with recursive residuals will be necessary.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.4
• /
• pp.1-5
• /
• 2021

Among elemental metals, niobium (Nb) has the highest superconducting transition temperature (T_c) at ambient pressure. Thus, Nb films have been used in superconducting electronics and radio frequency cavity applications. In this study, the depositional factors determining the crystallinity and T_c of Nb films were investigated. An Nb film grown at a sputtering temperature of 240℃ exhibited the maximum crystallinity of Nb and the minimum crystallinity of niobium oxide. X-ray photoelectron spectroscopy confirmed a maximum atomic percent of niobium and a minimum atomic percent of oxygen. A sputtering power of 210 W and a sputtering time of 50 min were the optimal conditions for Nb deposition, and the T_c of the optimized film (9.08 K) was close to that of bulk Nb (9.25 K). Transmission electron microscopy images of the thick film directly confirmed the removal of the typical in-plane compressive strain in the (110) plane caused by residual stress.