• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.217-221
• /
• 2001

Pseudomonas sp. PA09 was isolated from farm soil and used for the optical resolution of D-pipecolic acid from DL-popecolic acid. The strain PA09 consumed L-pipecolic acid preferentially as the sole carbon and energy source, thus accumulating D-pipecolic acid in the culture broth. Optimization to improve the enantiomeric excess and yield was performed. The time course experiment showed that the strain OP09 consumed L-pipecolic acid almost to completion after 35h of cultivation, and the enantiomeric excess and the yield (% of residual D-pipecolic acid) were 99.8 and 96.0%, respectively.

• Wind and Structures
• /
• v.11 no.2
• /
• pp.137-152
• /
• 2008

This paper discusses engineering aspects of the rear-flank downdraft that was recorded near Lubbock, Texas on 4 June 2002, and produced a gust wind speed nearly equal to the design value (50-year return period) for the region. The general characteristics of the storm, and the decomposition of the time histories into deterministic 'running mean' and random turbulence components are discussed. The fluctuating wind speeds generated by the event can be represented as a dominant low-frequency 'running mean' with superimposed random turbulence of higher frequencies. Spectral and correlation characteristics of the residual turbulence are found to be similar to those of high-frequency turbulence in boundary-layer winds. However, the low-frequency components in the running-mean wind speeds are spatially homogeneous, in contrast to the low-frequency turbulence found in synoptic boundary-layer winds. With respect to transmission line design, this results in significantly higher 'span reduction factors'.

• Journal of Information Display
• /
• v.9 no.4
• /
• pp.39-44
• /
• 2008

This paper investigates the effects of the existing sealing methods, such as the conventional atmospheric-pressure sealing method and vacuum sealing, on temporal bright-image sticking. To produce a residual image caused by temporal brightimage sticking, the entire region of a 42-in panel with an Xe-(11%)-He(35%) gas mixture was abruptly changed to a full-white background image after displaying a square-type image at peak luminance for about 60s. From the monitoring of the difference in the display luminance, infrared emission, color temperature, and disappearing time between the cells with and without temporal bright-image sticking, it was observed that the vacuum sealing method contributes to the reduction of temporal bright-image sticking.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11B
• /
• pp.985-998
• /
• 2003

본 논문에서는 IEEE 802.11 규격을 기반으로 다중 홉 Ad Hoc 모드에서 비 실시간 및 실시간 트래픽에 대한 통합 서비스를 지원하는 Wireless LAN을 구성할 때, 분산 방식으로 실시간 서비스의 우선권을 고려한 채널 액세스의 차별화를 제공할 수 있는 매체접근제어(Medium Access Control: MAC) 프로토콜의 구현 방안을 제안한다. 이를 위해 실시간과 비 실시간 트래픽의 Contention Window (CW)를 서로 분리하며, 실시간 서비스의 지연 바운드에 따라 정해진 잔여 수명(residual time)을 우선권 설정에 반영함으로써 실시간 트래픽의 지연 요구 사항을 보장할 수 있도록 한다. 또한 실시간 트래픽의 부하에 따라서 적응적으로 offset 값을 조정함으로써 offset에 의해 발생될 수 있는 수율의 저하를 최소화한다. 제안된 방식은 기존 IEEE 802.11 MAC 규격의DCF (Distributed Coordination function) 방식을 그대로 사용하면서 CSMA/CA 기반의 경쟁 방식을 통해서도 비 실시간 트래픽과의 차별화가 가능하고, 또한 잔여 수명 시간을 고려한 동적인 우선권 할당이 가능하도록 하였다. 시뮬레이션에 의한 분석 결과에 따르면 기존 DCF와 비교할 때 실시간 단말의 용량을 2배까지 향상시킬 수 있으며, 트래픽 부하에 따라 적응적 제어를 통해 추가적인 성능 개선 효과를 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.703-705
• /
• 2000

In this paper, we design a robust adaptive controller for a nonlinear systems with uncertainties to be rejected via disturbance adaptation law. The nonlinear system considered in this paper has unknown nonlinear functions being influenced by external disturbance. The upper bounds of unknown nonlinear functions at each time is estimated by using disturbance adaptation law. The estimated nonlinear functions are used to design stabilizing function and control of input. Tuning function is used to estimate unknown system parameter without overparametrization. A set-point regulation error converges to a residual set close to zero asymptotically fast.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.63-66
• /
• 2017

All passenger ships aboard more than 36 passengers are to be able to easily find escape routes when the escape way by fire with flame spread were onboard vessel (incl. Ferry, Passenger, Ro-pax, Inland Ferry) It should be impossible by ordinary emergency lights. The international Maritime Organization (IMO) gives special requirement for luminescent evaluation onboard test procedure and applicable location of low location lighting. In order to maintain the residual light source for a certain time in the low location lighting with a strip-shaped light source, the light source material must be sufficiently exposed to the light due to the proper placement of the escape route. The lighting arrangement influence how maintain low location lighting strip luminescent which measured onboard in connection with what elements are mainly sustain luminescent.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.232-238
• /
• 1995

The thermal stress distribution of WC and Ni binder phases In WC-26st.%Ni and WC-6wt.%Ni composites has been investigated over the temperature range 100-900 K using a time-of-flight neutron diffractometer. To determine the stress distribution, the breadths of WC and Ni peaks in the reference powder and the composites were analyzed. The peak breadths were corrected for particle size effect using a procedure based on the integral peak breadth method of particle size-strain analysis. The result shows a broad range of strain, and thus stress, is present in the WC and Ni binder phases of the composites. The strain distribution of both phases broadens as the temperature decreases, and some fraction of total strain distribution of the WC phase remains tensile regardless of the temperature. The strain distribution of the WC phase broadens as the binder content increases, and that of Ni binder phase broadens as the binder content decreases, which means the strain distribution broadens as the absolute value of residual stress increase.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.104-110
• /
• 2006

We investigated why aspen extractives are more resistant in kraft pulping than pine extractives. Residual extractives content in aspen kraft pulps were 0.5~1.1% compared with 0.1~0.2% in pine pulps. This different response arises from the different composition of extractives in wood chips. Resin acids in pine were almost completely removed in kraft pulping but those are not existence in aspen. Slower saponification of aspen steryl esters resulted from different chemical structure of aspen steryl esters. Main sterols in aspen steryl esters were 24-methyl cyclolanostenol which was highly resistant to alkaline hydrolysis with its characteristic steric hindrance. Sterols in aspen were not well removed in kraft pulping. The relative composition of sterol in aspen kraft pulps was increased with increasing pulping time. The presence of fatty acids in aspen kraft pulps is considered to unusual. Fatty acids in alkaline are supposed to be well ionized and removed well in the washing stage. Nevertheless, there were significant amount of fatty acids remaining in aspen kraft pulps.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.331-337
• /
• 2009

Electrolysis produces hypochlorous acid by using a small quantity of NaCl as electrolyte. This process maximizes the stabilization of drinking water through the control of chlorine residual concentration. This study investigated free chlorine generation by an electrolytic method using $Ti/IrO_2$ and stainless steel. The generation of free chlorine was increased with increasing hydraulic retention time, voltage, chlorine ion concentration and the number of electrodes. However, the change of pH did not affect the generation of free chlorine. There was no significant difference on the behavior of chlorine concentration between electrolytic method and NaOCl injection. In this study, the concentration of free chlorine predicted model based on power functional model was developed various under conditions. Electrolysis free chlorine generation model can be effective tool in the estimation of free chlorine generation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.288-298
• /
• 1999

In spark ignited engines, the electrical spark not only sets the time for the onset of combustion but also is able to greatly influence the character of the initial flame growth and the subsequent combustion, and thereby can influence engine performance. The relative importance of the ignition energy is particularly high under lean or high residual gas or exhaust gas recirculation (EGR). In this study, a modeling of flame Initiation and its development is proposed. Submodels consist in representing of cylinder pressure and temperature, heat transfer to cylinder wall, and flame kernel heat transfer to ambient air and to spark plug electrodes. The breakdown process and the subsequent electrical power input initially control the kernel growth while intermediate growth is mainly dominated by diffusion or conduction. Then, the flame propagates by the chemical energy, and laminar and turbulent flame velocity.