• Journal of Korea Foundry Society
• /
• v.38 no.1
• /
• pp.9-15
• /
• 2018

Electromagnetic continuous casting (EMCC) was used to fabricate Ti-6Al-4V alloys with properties suitable for medical applications. Ti-6Al-4V alloy ingots fabricated by EMCC were subjected to heat treatment, such as residual stress removing (RRS), furnace cooling after solution treatment (ST-FC) and water-cooling after solution treatment (ST-WC), in order to obtain characteristics suitable for the standard. After component analysis, the microstructure and mechanical properties (tensile strength and elongation) were evaluated by ICP, gas analysis, OM, SEM, a Rockwell hardness tester and universal testing machine. The Ti-6Al-4V alloy ingot fabricated by EMCC was fabricated without segregation, and the lamellar structure was observed in the RRS and ST-FC specimens. The ST-WC specimen showed only martensite structure. As a result of evaluating the mechanical properties based on the microstructure results, we found that the water-cooled heat treatment condition after the solution treatment was most suitable for the Ti-6Al-4V ELI standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.374-382
• /
• 2017

This paper proposed a 2 stages 2-arm sinuous antenna that operates in frequency range 0.8-6GHz. The proposed antenna's total radius is 60mm, in which 1st stage's radius is 50mm which is designed as self-complementary structure(cell's angle width $90^{\circ}$) with 8 cell, and 2nd stage is composed of non-self-complementary structure with 0.5 cell of cell's angle width $720^{\circ}$ in the radius width 10mm. Measurement's result shows that -10dB return loss starts at 0.807GHz, but 1 stage 2-arm sinuous antenna that use the same radius starts at about 0.878GHz, so proposed the possibility of the miniaturization of the sinuous antenna.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.88-92
• /
• 2006

Large-scale model tests of welded topside joints were carried out to observe the fatigue behavior of API 2W Gr.50 steel produced by POSCO. The fatigue crack behaviors for various loading conditions were measured and investigated around the critical joint sections. The experimental results have been verified with numerical approaches and also compared with the AWS D1.1 and DnV RP-C203 design curves. The large-scale experiment models were fabricated, based on the actual operating east area fixed platform. The dimensions of the models were slightly modified to accommodate the test facilities and capacities. The fatigue test was carried out having ${\Delta}Q$ of T1=705.6kN, T2=749.7kN and T3=793.8kN. The three specimens were statically loaded 20 times, with various loadings of about 50kN intervalsbetween the maximum and minimum loads required in the fatigue tests. This loading removed the residual stress in the specimen before the fatigue tests. The topside joint crack was initiated from the brace heel, where the maximum tensile stress occurred. The API 2W Gr.50 steel satisfied the AWS D1.1 detail category C and DnV RP-C203 detail category F ${\Delta}S-N$ curve.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.5
• /
• pp.33-38
• /
• 2007

The welding methods have been applied in the most structural products from multi-field of automobile, ship construction and construction, and so on. The structure steel must have enough strength of structure. In this study, SS400 steel and STS304 steel were used to estimate the corrosion characteristics of the weld thermal cycle simulated HAZ. To evaluate the corrosion characteristics, also, the materials with two conditions were used in 3.5% NaCl. The one is to the drawing with diameter of ${\Phi}10$ and the other is to the residual stress removal treatment. The electrochemical polarization test and immersion test were carried out. From test results, corrosion potential, corrosion current density, weight loss ratio and corrosion rate were measured. In the kinds of SS400 steels, corrosion potential of weld thermal cycle simulated specimens after the heat treatment showed somewhat the direction of noble potential. And in the base metal to be drawing weight loss ratio and corrosion rate occurred higher than the other kinds. In the kinds of STS304 steels, the result of base metal to be drawing was similar to results of SS400 steels, too. Two kinds of $750^{\circ}C$ and $1300^{\circ}C$ of weld thermal cycle simulation after the heat treatment were rather higher than the other kinds in weight loss ratio and corrosion rate.

• Journal of muscle and joint health
• /
• v.5 no.1
• /
• pp.7-25
• /
• 1998

Rheumatoid arthritis, unlike other chronic diseases, causes the patients to experience uncertainty in their daily lives and thus to feel threat on their emotional comfort because of inconsistent and unpredictable symptoms such as pain. Therefore, a theoretical framework is needed for explanation of uncertainty in patients having rheumatoid arthritis. A hypothetical model was constructed on the basis of Mishel's Uncertainty Theory and other literature review. The model included 9 theoretical concepts and 19 paths. Subjects of the study constituted 330 partients who visited outpatient clinics of two university hospitals and one general hospital in Seoul. Self report questionnaires were used to measure the variables affecting uncertainty. Reliability coefficients of these instruments were found Cronbach's Alpha=$.70{\sim}.94$. In data analysis, SAS program and PC-LISREL 8.03 computer program were utilized for descriptive statistics and covariance structure analysis. The results of covariance structure analysis for model fitness were as follows : 1) Hypothetical model showed a good fit to the empirical data : Chi-square($X^2$)=41.81 (df=11, P=.000), Goodness of Fit Index=.974, Root Mean Square Residual=.049, Normed Fit Index=.928, Non Normed Fit Index=.814. 2) For the validity and the parcimony of model, a modified model was constructed by appending 2 paths and deleting 5 paths according to the criteria of statistical significance and meaningfulness. 3) The results of hypothesis testing were as follows : (1) Educational level, event familiarity and severity of illness had a direct effect on uncertainty : Event congruency had both direct and indirect effect on uncertainty : Credible authority and symptom consistency had a nonsignificant direct effect on uncertainty, (2) Illness duration, symptom consistency, and event congruency had a direct effect on severity of illness ; Credible authority had a both direct and indirect effect on severity of illness ; Event congruency had the greatest effect on severity of illness, and event familiarity had a nonsignificant direct effect on severity of illness.

• Journal of Korean Society of Archives and Records Management
• /
• v.1 no.1
• /
• pp.177-200
• /
• 2001

The causes which affects the deterioation of paper arc paper structure, papermaking process, temperature and rative humidity, light and biological agents. Paper made from cllulose fibers by the wood and the nonwood, This paper structure is further hydrolyzed by acidic additive such as the sizing agents during the manufacturing process. These additives leave residual acids in the paper, which break the cellulose clown to simper molecules. The results is weak paper and bas caused most of the damage to book. This study was carried out to investigate the presevation and the deacidification for the permanenece by the book. The deacidification and the chemical agents aims to nutralized the aicd in paper and add alkaline to it as a buffer to withstand future acid attacks. By applying the system to the acid paper with a pH of 4.5 neutralized a pH of 8.5. The expected of alkaline reserved paper extend about 2times and 3times than acidic paper.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.121-129
• /
• 2004

The geostatistical approach was applied to integrate MT (Magneto-telluric) resistivity data and borehole information for the spatial RMR (Rock Mass Rating) evaluation. Generally, resistivity of the subsurface is believed to be positively related to the RMR, thus the resistivity and borehole RMR information was combined in a geostatistical approach. To relate the two different sets of data, we take the MT resistivity data as secondary information and estimate the RMR mean values at unsampled points by identification of the resistivity to the borehole data. Two types of approach are performed for the estimation of RMR mean values. Then the residuals of the RMR values around the borehole sites are geostatistically modeled to infer the spatial structure of difference between real RMR values and estimated mean values. Finally, this geostatistical estimation is added to the previous means. The result applied to a real situation shows prominent improvements to reflect the subsurface structure and spatial resolution of RMR information.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.40-47
• /
• 2001

The structural dependence of the performance of an 1.55 $1.55{\mu}m$ InGaAsPIInGaAsP MQW electro-absorption modulator for highspeed digital fiber communication was systematically investigated. The effects of n-doped SCH region length $t_n$ as well as the general structure parameters including quantum well number $N_w$, well-thickness $t_w$, detuning wavelength $\Delta\lambda$, and device length L were thoroughly analyzed. Thereby, a high-pelfoIDlance electro-absorption modulator with device length L of $100{\mu}m$ was successfully designed. The designed structure showed excellent characteristics that have residual loss less than -1.5 dB, operational voltage from 0 V to -2V, and extinction ratios of -2.92 dB at $V_{\alpha}$=-1 V and -10 dB at $V_{\alpha}$=-2V.X>=-2V.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.151-158
• /
• 1997

Nitrogen incorporated diamond-like carbon films were deposited by r.f. glow discharge of mixtures of benzene and ammonia gases. Mechanical properties, composition and atomic bond structure were investigated when the fraction of ammonia increases from 0 to 0.79 and the negative self bias voltage of cathode from 100 to 900 V. Both the residual compressive stress and the hardness decrease from 1.7 to 1.0 GPa and from 2750Kgf/$\textrm{mm}^2$ to 1700Kgf/$\textrm{mm}^2$, respectively. In addition to hydrogen, triply bonded nitrogens also play a role of teminal sites of the three dimensional atomic bond network. By considering the hydrogen concentration and the nitrogen bond characteristics, it can be shown that the mechanical properties of the films are determined by the content of three dimensional inter-links of $sp^2$ clusters. Although the mechanical properties are affected by the nitrogen addition, its depedence on the negative bias voltage is qualitatively identical to that of pure diamond-like carbon films.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.3
• /
• pp.29-40
• /
• 2013

Seismic response of single degree of freedom system supported by shallow foundation was analyzed by using nonlinear explicit finite difference element code. Numerical analysis results were verified with dynamic centrifuge test results of the same soil profile and structural dimensions with the numerical analysis model at a centrifugal acceleration of 20 g. Differences between the analysis and the test results induced by the boundary conditions of control points can be reduced by adding additional local damping to the natural born cyclic hysteretic damping of the soil strata. The analysis results show good agreement with the test results in terms of both time histories and response spectra. Thus, it can be concluded that the nonlinear explicit finite difference element code will be a useful technique for estimating seismic residual displacement, earthpressure etc. which are difficult to measure during laboratory tests and real earthquake.