• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.150-164
• /
• 2022

This study was conducted to provide basic information for the development of silvicultural guidelines and manuals. This was achieved through analysis of tree and stand characteristics according to the first and second thinning in Korean white pine plantations. Data were collected from permanent plots installed at Korean white pine plantations according to thinning intensity, and residual tree and stand variables, including diameter at breast height (DBH), volume, and mortality at age 19-43, were analyzed using data repeatedly collected in 4-5 measurements by experiments. According to one-way variance of analysis, tree DBH and volume were significantly different according to thinning intensity (p<0.05). DBH distribution was skewed to the left side over time as thinning intensity was heavier. Thus, tree DBH values were larger in heavy thinning plots with increased age. The periodic annual increment (PAI) of DBH was higher with heavier thinning intensity and fewer years after thinning. The PAI range by thinning intensity was 0.48-0.95 cm/year at age 19-24. In addition, the PAI increased in heavy thinning plots after the second thinning; The PAI range by thinning intensity was 0.29-0.67 cm/year after the second thinning at age 37-42. The PAI of tree volume differed according to thinning intensity, and the PAI value did not decrease obviously, in contrast to the pattern of the DBH PAI. Stand volume was generally higher in high-density stands, and the PAI of stand volume was high in unthinned and light thinning plots. Mortality was highest in unthinned plots, and the differences in mortality according to thinning intensity increased over time. Consequently, the growth of DBH and tree volume was lower as stand density increased, but this growth was facilitated with appropriate first and second thinning operations.

• The Korean Journal of Pesticide Science
• /
• v.6 no.4
• /
• pp.287-292
• /
• 2002

To establish effective and safe control method against Phytophthora root rot caused by Phytophthora capsici on tomato in hydroponic culture, three pesticides, oxadixyl copper hydroxide 8% WP, metalaxyl copper oxychloride 15% WP, and dimethomorph. dithianon 38% WP at 4 concentration levels were tested on potato dextrose agar medium inoculated with Phytophthora capsici. All pesticides inhibited mycelial growth, but two pesticides of them, metalaxyl copper oxychloride WP and dimethomorph. dithianon WP, were selected as effective pesticides for the efficacy test in a hydroponic culture. Forty days after transplanting of tomato seedlings, 4 ml of sporangia of P. capsici (about 25 sporangi/ml) per plot was inoculated around tomato plant root, and then 5 days after inoculation, the pesticides diluted at 5,000 times were drenched 1, 2 or 3 times per plot on the culture cube at 15 days interval. Fifteen days after drenching, tomato fruits and hydroponic culture solution were sampled for the analysis of pesticide residues. Dimethomorph was detected 0.001 and 0.003 mg/kg in tomato of the plots sprayed 2 and 3 times with dimethomorph dithianon WP of which detection levels were far below compared with 1.0 mg/kg of the Korean MRL of dimethomorph on tomato. Incidences of Phytophthora root rot were $30.5{\sim}50%$ in the plots drenched at 1 or 2 times with metalaxyl.copper oxychloride WP, and $16.7{\sim}25%$ in the plots treated with dimethomorph dithianon WP. However, there was no incidence of Phytophthora root rot in the plots treated at 3 times with both of pesticides, showing no phytotoxic effect. Based on the results, the drenching of these pesticides on the culture cube could be recommended as a very safe and effective control method for Phytophthora root rot in tomato.

• Korean Journal of Organic Agriculture
• /
• v.9 no.2
• /
• pp.101-115
• /
• 2001

Nitrogen applied as fertilizer for crop production is partly absorbed by plant , and the remaining nitrogen in soil might be leached out through complicated processes to the subsoil layer Especially, NO$_3$-N in leachate causes environmental pollution. The purpose of this study was focused on understanding of uptake of nutrients by plants, the behaviors of nutrients in soil and the possibility of leaching loss when nitrogen fertilizer and completely decomposed compost were applied. Lysimeters(Volume 0.15㎥, Diameter 62cm, Height 62.8cm) were installed for collecting leachate in the Jeju volcanic ash soils. Lysimeter study consisted of thirteen treatments : fallow, fallow with weeding, cropping without fertilizer and compost, three N fertilizer soil surface applications(16, 32, 64kg/10a), three N fertilizer and compost soil surface applications(16+800, 32+1600, 64+32kg/10a), two water dissolved N fertilizer applications(16, 32kg/10a), and low and high plant densities. N fertilizer was applied as urea. The growth of com(preceding crop) and potatoes(succeeding crop) and leaching loss were determined during the experimental period. The results obtained were summarized as follows ; With Increased N, pH of leachate tended to decrease and NO$_3$-N concentration of leachate increased. NO$_3$-N leaching loss was remarkably greater in soil from the bare plot without fertilization and the weed control than from plots with medium N rate and was least in the cropping plot without fertilization. NO$_3$-N concentration in leachates from the water dissolved N fertilizer application plots was 64% of that from the soil surface application plots. The concentration of Ca and K ions and the leaching loss of these ions were least from the cropping plot without fertilization and were greatest from bare plots(T1 and T2) without fertilization. The proportion of leaching and residual N in soil increased as N rate increased indicting that higher N rates increase the possibility of N leaching to subsoil layer The proportion of N leaching losses was lower at the low N rate and the high plant density. In future, fertilization prescription which can maximize fertilizer use efficiency and minimize the pollution of ground water will be needed for conserving the environments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.4
• /
• pp.514-522
• /
• 2017

Objective: The study aimed to assess the N use efficiency (NUE) of pig slurry (in comparison with chemical fertilizer) for each regrowth yield and annual herbage production and their nutritive value. Methods: Consecutive field experiments were separately performed using a single application with a full dose of N (200 kg N/ha) in 2014 and by four split applications in 2015 in different sites. The experiment consisted of three treatments: i) control plots that received no additional N, ii) chemical fertilizer-N as urea, and iii) pig-slurry-N with five replicates. Results: The effect of N fertilization on herbage yield, N recovery in herbage, residual inorganic N in soil, and crude protein were significantly positive. When comparing the NUE between the two N sources (urea and pig slurry), pig slurry was significantly less effective for the earlier two regrowth periods, as shown by lower regrowth dry matter (DM) yield, N amount recovered in herbage, and inorganic N availability in soil at the 1st and 2nd cut compared to those of urea-applied plots. However, the effect of split application of the two N sources was significantly positive at the last two regrowth periods (at the 3rd and 4th cut). The two N sources and/or split application had little or no influence on neutral detergent fiber (NDF) content, acid detergent fiber (ADF) content, and in vitro DM digestibility, whereas cutting date was a large source of variation for these variables, resulting in a significant increase in in vitro DM digestibility for the last two regrowth periods when an increase in NDF and ADF content occurred. Split application of N reduced the N loss via nitrate leaching by 36% on average for the two N sources compared to a single application. Conclusion: The pig slurry-N was utilized as efficiently as urea-N for annual herbage yield, with a significant increase in NUE especially for the latter regrowth periods.

• Korean Journal of Weed Science
• /
• v.4 no.2
• /
• pp.194-203
• /
• 1984

To evaluate the compatibility in systemic use of 4 kinds of herbicides on both weeds and soybeans, trials were conducted at Coll. Exp. Farm/Jonnam Nat'l. Univ., 1983. Among the experimented 4 herbicides, alachlor or metribuzin were applied at pre-emergence, and followed by postemergence spraying of acifluorfen or bentazon, respectively. All herbicides were applicated at rates of 0, 0.25, 0.5, and 0.75 kg active ingredients per ha. Under the conditions which Echinochloa crusgalli and Digitaria adscendense were dominating, most comprehensive compatibility was found from each rates 0.5 - 0.75 kg/ha at 60 days after crop seeding date. However, slight transient leaf burn was evident at the plots of metribuzin and/or acifluorfen applicated. The positive tendency of herbicide interactions in weeding efficacy was observed from the system in alachlor sequence. However, the results in crop growth and yields at hervest indicate the necessity of higher rates of each herbicides upto 0.75 kg/ha for the consistence weeding efficacies. And more excellent weeding results (crop growth and yields) on crop plants were provided from the plots which applicated by residual type herbicide, namely acifluorfen than bentzaon.

• Korean Journal of Weed Science
• /
• v.13 no.1
• /
• pp.7-13
• /
• 1993

Experiments were carried out to investigate the utilization of paraquat and diquat as desiccants for harvest-aid of sesame. When paraquat and diquat were sprayed at 3days or 3hours before cutting of sesame plants, moisture content in treated plots was evenly rapidly decreased and sesame yeild was not significantly different as compared with that in untreated plot. Percentage of germination of sesame seed in treated plots was similar to that in untreated check. Residual amount in sesame seed was not detectable when these chemicals were treated with 250ppm at 3days before cutting of sesame plant. Percentage of thrashing was high in sesame plants treated with paraquat and diauat with the lapse of time after cutting. Required labor in thrashing of sesame was reduced when applied with these chemicals. Harvest efficiency of sesame after spray of paraquat and diquat was good by comparison with the traditional practice.

• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.381-395
• /
• 1989

The main purpose of this research is to provide scientific informations about standard wage and performance tariffs in forest management with special reference to working time for thinning. To identify relationships between net working time and tree characteristics, three geographically different sample plots were established at Yangsan, Bongpyung and Jinan and 460 oaks, 372 Japanese larches, 232 red pine and 240 pitch pine mere selected at each sample plots. The results of statistical analysis using multiple regression are as follows ; 1. Five independent variables of breast height diameter(DBH), mid-diameter(MD) large end diameter(LD), log-length(L), No. of branches(NOB) were stable independent of worker and tree species. 2. Comparing correlation coefficient of five independent variables, the best predictive variables, breast height diameter and No. of branches, were selected. Breast height diameter and No. of branches were identified as the most important independent variables in terms of effect on the dependent variable of the working time. 3. Comparing coefficient of determination (Rp) and residual mean square (MSEp), the best Linear regression equation for each tree species was selected as follower : $WT=a+b1{\times}NOB+b2{\times}DBF$ 4. Proportion of hang-up time to total working time in thinning were 66% in oak stand, 74%, in Japanese larch stand, 55%, in red pine stand and 52% in pitch pine stand, respectively. 5. Based on the best regression equation, a table of working time was made by strata of number of branches and breast height diameter. 6. Total working time using the best regression equation in Table 5 can be predicted in terms of felling time, limbing time, hang-up time, i.e., total working time increases by 11 to 13 seconds with every 1 centimeter increase in breast height diameter from 7 to 16 centimeter.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.336-341
• /
• 2016

The object of this study was to classify the local types in relation to regional differences using Height-DBH growth of Pinus densiflora in Korea. The regional types were clustered according to Getis-Ord's $G_i$ among Local indicators of spatial association (LISA) by characteristics of spatial distribution which were calculated the residual of sample plots by fitting Height-DBH growth model using Weibull growth equation. Accordingly, Pinus densiflora were classified 3 groups, It indicated that annual precipitation had one of the biggest impacts among the considered site and climate factors. This results can become the standard for regional management of Pinus densiflora forests.

• Journal of Korean Society for Quality Management
• /
• v.41 no.1
• /
• pp.109-118
• /
• 2013

Purpose: Given the several proper models for given mixture components-process variables experimental data, we propose a strategy to find the optimal condition in which the performance of the responses is well-behaved under those models. Methods: Given the mixture experimental data with process variables, first we choose the reasonable starting models among the class of admissible product models based on the model selection criteria and then, search for the candidate models that are the subset models of the starting model by the sequential variable selection method or all possible regressions procedure. Good candidate models are screened by the evaluation of model selection criteria and checking the residual plots for the validity of the model assumption. Results: We propose a strategy to find the optimal condition in which the performance of the responses is well-behaved under those good candidate models by adopting the optimization methods developed in multiple responses surface methodology. Conclusion: A strategy is proposed to find the optimal condition in which the performance of the responses is well-behaved under those proper combined models. This strategy to find the optimal condition is illustrated with the example in this paper.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.342-356
• /
• 2016

Purpose: The drying of a thin layer of native cassava starch in a tray dryer was modeled to establish an equation for predicting the drying behavior under given conditions. Methods: Drying tests were performed using samples of native cassava starch over a temperature range of $40-60^{\circ}C$. We investigated the variation in the drying time, dynamic equilibrium moisture content, drying rate period, critical moisture content, and effective diffusivity of the starch with temperature. The starch diffusion coefficient and drying activation energy were determined. A modification of the model developed by Hii et al. was devised and tested alongside fourteen other models. Results: For starch with an initial moisture content of 82% (db), the drying time and dynamic equilibrium moisture content decreased as the temperature increased. The constant drying rate phase preceded the falling rate phase between $40-55^{\circ}C$. Drying at $60^{\circ}C$ occurred only in the falling rate phase. The critical moisture content was observed in the $40-55^{\circ}C$ range and increased with the temperature. The effective diffusivity of the starch increased as the drying temperature increased from 40 to $60^{\circ}C$. The modified Hii et al. model produced randomized residual plots, the highest $R^2$, and the lowest standard error of estimates. Conclusions: Drying time decreased linearly with an increase in the temperature, while the decrease in the moisture content was linear between $40-55^{\circ}C$. The constant drying rate phase occurred without any period of induction over a temperature range of $40-55^{\circ}C$ prior to the falling rate period, while drying at $60^{\circ}C$ took place only in the falling rate phase. The effective diffusivity had an Arrhenius relationship with the temperature. The modified Hii et al. model proved to be optimum for predicting the drying behavior of the starch in the tray dryer.