• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.594-597
• /
• 2014

We propose a novel approach to measure the residual phase noise (RPN) of a photodiode (PD) based on a two-tone correlation method. Compared with the previous measurements of the RPNs of PDs, this method is more convenient in practical application. In this method, two microwave sources and other components were placed in two isolated links sharing the same PD, so the noises of them were uncorrelated. With an FFT analyzer, the uncorrelated noises could be mostly suppressed while only the RPN of the PD was preserved. Voltage-dependent nonlinearities of PDs were studied previously. In this letter, we investigate the relationship between the RPN of the PD and the bias voltage on the PD. By changing the bias voltage, the difference of the RPN can be up to 10 dB.

• 한국대기환경학회지
• /
• 제30권1호
• /
• pp.59-67
• /
• 2014

In 1995 Kimchi refrigerator was developed at first, and has used HFC-134a as refrigerant. Kimchi refrigerator has been made 1,044,694 on the basis of 2010, disposed about 160,000 per year. Although mobile air conditioning, commercial refrigerator, general refrigerator is regarded as a major source of HFC-134a, little information is available for its emission characteristics of HFC-134a. This paper addresses the fugitive emission factors of Kimchi refrigerator at use-phase and disposal-phase. The residual quantities of Korean-made fifty three waste Kimchi refrigerators were weighed using a commercial recover of refrigerants to determine the emission factors at the disposal-phase. On the other hand, the emission factors at use-phase were estimated from the residual quantities and operating times. The average residual rate of forty three scarp Kimchi refrigerators is determined to be $74.6{\pm}5.2%$. The emission factor at the use-phase is estimated to be $3.5{\pm}0.8%/yr$ as a result of using average age of 11.7 years and the average residual rate determined here. The emission factor at the disposal-phase is determined to be 31.3% after adopting 58% of the recycling rate of refrigerant reported by Recycling Center. We estimate 3.1 g/yr for the average emission quantity of HFC-134a per operating refrigerator, while 22.5 g for that per waste Kimchi refrigerator. Since the chemical compositions of refrigerant of waste Kimchi refrigerator were the same as those of new refrigerant, it is expected that the HFC-134a recovered from waste Kimchi refrigerator can be reused for refrigerant.

• Journal of information and communication convergence engineering
• /
• 제15권4호
• /
• pp.205-211
• /
• 2017

Combining dispersion-managed optical links with midway optical phase conjugation (OPC) is a possible method of compensating for optical signal distortion due to group velocity dispersion and nonlinear Kerr effects. Although an improvement in the performance of these optical links has been reported, the fixed residual dispersion per span (RDPS) that is typically used restricts the flexibility of link configurations. Thus, in this paper, a flexible dispersion-managed link configuration, comprising artificial distributions of linearly/nonlinearly incremented RDPS, is proposed. Simulations show that a descending distribution of RDPS before the midway OPC, and an ascending distribution of RDPS after the midway OPC, gives the best artificial distribution pattern as the number of fiber spans is increased, regardless of the RDPS incrementation method.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.625-626
• /
• 2015

그룹 속도 분산과 비선형 효과의 상호 작용에 의해 왜곡되는 WDM 신호의 보상을 위해 전체 전송로 중간에 광 위상 공액기 (optical phase conjugator)가 적용되고 중계 구간의 단일 모드 광섬유(SMF; single mode fiber) 길이와 RDPS(residual dispersion per span)를 인위적으로 분포하는 $80km{\times}50spans$의 광전송 링크의 최적 분포 패턴을 도출하였다.

• 한국정밀공학회지
• /
• 제33권7호
• /
• pp.551-558
• /
• 2016

Reduction of welding residual stress is very important in the railway industry, but calculating its distribution in structures is difficult because welding residual stress formation is influenced by various parameters. In this study, we developed a finite element model for simulating the repair welding process to recover a surface damaged rail, and conducted a series of parametric studies while varying the cooling rate and the duration of post weld heat treatment (PWHT) to find the best conditions for reducing welding residual stress level. This paper presents a three-dimensional model of the repair welding process considering the phase transformation effect implemented by the ABAQUS user subroutine, and the results of parametric studies with various cooling rates and PWHT durations. We found that heat treatment significantly reduced the residual stress on the upper rail by about 170 MPa.

• 한국항행학회논문지
• /
• 제17권2호
• /
• pp.208-217
• /
• 2013

분산 제어 (DM; dispersion management)와 광 위상 공액 (optical phase conjugation)이 적용된 광전송 링크에서 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span) 기울기 (slope)에 따른 파장 분할 다중 전송 (WDM; wavelength division multiplexed) 채널의 보상 특성을 분석하여 최적의 RDPS 기울기를 도출하였다. RDPS 기울기가 증가할수록 WDM 채널의 유효 입사 전력 범위를 더욱 증가시키고 채널 간 성능 차이를 더욱 감소시키는 것을 확인하였다. 아울러 RDPS 기울기가 증가할수록 유효 전체 잉여 분산 (NRD; net residual dispersion) 범위도 증가하여 큰 RDPS 기울기가 유연한 광전송 링크 구성에 더욱 유리하다는 것을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.975-977
• /
• 2013

그룹 속도 분산과 비선형 효과의 상호 작용에 의해 왜곡되는 WDM 신호의 보상을 위해 전체 전송로 중간에 광 위상 공액기 (optical phase conjugator)가 적용되고 중계 구간의 단일 모드 광섬유(SMF; single mode fiber) 길이와 RDPS(residual dispersion per span)를 인위적으로 분포하는 광전송 링크의 최적 분포 패턴을 도출하였다. 최적의 전체 잉여 분산 (NRD; net residual dispersion)인 10 ps/nm와 -10 ps/nm로 설계된 링크에서 중계 구간이 증가할수록 SMF 길이는 점차 감소시키고, RDPS는 점차 증가시키는 분포가 균일한 분포에 비해 성능 면에서 우수한 것을 확인하였다.

• 전기학회논문지
• /
• 제64권1호
• /
• pp.72-77
• /
• 2015

When connecting 6 lead wires from stator windings to the terminals of 3 phase induction motors for Y or ${\triangle}$ connection, it is feared that the polarities of windings could be reversed each other if the wire tags are lost or erased, resulting in inadmissibly high current to motors in case of starting. To protect motors against such situations, some test procedures are necessary during wire connection which need to be easy ways to electricians without particular tools except a general multi-tester and with less time-consuming in the field. This study focuses on a test measure to satisfy these requirements which is able to provide them a convenient procedure for winding polarity discrimination considering the field condition. Here, the proposed measure utilizes the residual magnetism of the rotor and checks the indication of voltage or current at windings which are induced by the residual flux of rotor when rotating it by hands with 3 stator windings connected in the form of I connection. Principle characteristics and experiment results for this method are analyzed in the view of the effectiveness and applicability for the winding polarity discrimination.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.47-51
• /
• 2014

In this work, a possible mechanism for grain evolution in Al-Mg alloy films during thermal annealing is suggested on the basis of the phase transition and the related residual stress. Al-Mg alloy films with compositions of 14.0 and 18.0 wt% Mg content were deposited on cold-rolled steel substrates by the direct current co-sputtering method using Al and Mg targets. After the deposition, the samples were thermally annealed at $400^{\circ}C$ for 10 min. The featureless, dense cross-sectional microstructure of the as-deposited films turned into a grainy microstructure after the thermal annealing. According to the residual stress evaluated by using the $XRD-sin2{\psi}$ technique and the phase analysis by XRD, it is likely that grains were created in order to relieve the additional accumulation of residual stress originating from the phase transition from face-centered cubic Al (${\alpha}$) to Al3Mg2 (${\beta}$) and Mg (${\delta}$) phases, suggesting interplay between the microstructure and residual stress.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.83-91
• /
• 1996

Monolithic AlN and AlN-W composites were fabricated by pressure-less sintering at 190$0^{\circ}C$ under nitrogen atmosphere and the influences of tungsten phase on the microstructure and mechanical properties were investi-gated. In the fabrication of sintered specimen no additive was used. And monolithic AlN showed substantial grain growth and low relative density. AlN-W composites were fully densified and grain growths of matrix were inhibited. The densification behavior of composites were inferred to be achieved through the liquid phase sintering process such as particle-rearrangement and solutino-reprecipitation. Also the oxid phases which is expected to form liquid phases duringsintering process were detected by XRD analysis. As the tungsten volume content increases fracture strength was decreased and fracture toughness was increased. It was suppo-sed that the strength decrease of composites with tungsten content was due to existence of interface phases. The subcritical crack growth behavior was observed from the stress-strain curve of composites. The effect of the secondary phase and interface phases on toughness in crease were studied through observation of crack propagation path and the influence of residual stress on crack propagation was investigated by X-ray residual stress measurement. In the result of residual stress measurement the compressive stress of matrix in composi-test was increased with tungsten volume content and the compressive stress distribution of matrix must have contributed to the inhibition of crack propagation.