• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.249-251
• /
• 2001

A novel technology for recycling valuable metals contained in waste dry-battery by vacuum metallurgy was devised by theoretical analysis. On the condition of the total chamber pressure of 1.013$\upsilon$10$^1$Pa, Hg, Cd and Zn are distilled in the temperature range of 773~973K, Pb is volatilized in the range of 1173~1273K while Mn, Cu, Fe and C are remained in residual. MnO$_2$and ZnO are reduced by carbon in waste dry-battery in 773~1273K. Pure metals including Zn, Cd, Hg and Pb can be recovered respectively from their mixed vapor by fractional condensation. Metal Cu and MnO$_2$can be obtained from the residual by hydrometallguical method. The technology can eliminate the pollution of Cd, Hg and Pb to environment.

• Journal of Chest Surgery
• /
• v.25 no.11
• /
• pp.1250-1253
• /
• 1992

A patient with intravascular hemolysis due to residual shunt and right ventricular outflow track obstruction after total correction of TOF was presented. The patient was 29 years old female. She underwented VSD closure with dacron patch, infundibulectomy, pulmonic valvotomy and direct closure of PFO. 8 months after the operation, severe intravascular hemolysis and hemolytic anemia appeared. Conservative therapies were not effective, her general condition and laboratory finding got worse gradually. She underwent reoperation, the shunt was closed and right ventricular outflow tract obstruction was corrected by pulmonary valvotomy, infudibulectomy and transannular patch. After operation, hemolysis disappeared dramatically. Severe hemolysis may induce renal failure and necessitate transfusion frequently. If hemolytic anemia is not corrected by conservative treatment, early reoperation is required.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.4
• /
• pp.279-283
• /
• 1998

The osteoporosis is a disease that represents a reduction in the volume of bony tissue relative to whole bone volume. And mandible also may be affected. Such porotic mandible may influence the result of the surgery like dental implant surgery relating mandible. So, the author examed the panoramic view of 89 persons for finding the possibility of useful diagnostic parameters of osteoporosis. To know the correlationship between the condition of vertebra and mandible, bone marrow density of lumbar spine from 2nd to 4th, and the number of residual tooth, panoramic mandibular index (PMI), angular cortical bone thickness (ACT) and ramus cortical bone thickness (RCT) were compared. The result is that PMI and ACT have similar relative weak linear correlationship, RCT have very weak linear correlationship, the number of residual tooth have not linear correlationship.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.63-64
• /
• 2012

In case of concrete, it should be deformed by many factors, such as explosive spalling, thermal strain and creep at high temperature. Structural fire design has been proposed to predict fire damage as national standard. It is general safer to use values obtained from tests of unstressed residual test in stead of stressed test. But most of thermal properties on concrete were conducted with normal aggregate. In this study, it evaluated mechanical properties of concrete with aggregate type and loading condition. we use normal and light aggregate to have different thermal properties. Also, we test mechanical properties to use Ø100×200 mm cylinder specimen according to target temperature and 0%, 20%, 40% loading.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.1
• /
• pp.79-86
• /
• 2015

The purpose of this study is to evaluate structural integrity of a weldment which is partially screwed and then welded. Two finite element models are constructed and solved: operating temperature and internal pressure are considered in the first simple model, and welding process and normal operating condition including heat-up process are simulated in the second model. Structural integrity assessment criteria are satisfied with both finite element models, therefore the repair weldment finely sustains structural integrity of this assembly and prevents leakage. Stresses are dramatically increased when weld residual stress is considered, but it should be considered as a secondary stress.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.372-378
• /
• 2003

This study investigates the fractional composition and the leaching characteristics of heavy metals in polluted soils due to mining activities. The fractionated composition of heavy metals is classified into five fractions, adsorbed, carbonate, reducible, organic and residual fraction. The status of humic substances in mine wastes of most sites are polyhumic except tailing from Sangdong mine. According to the sequential extraction procedures (SEPs), leaching probabilities of Cd in coal wastes and tailing are relatively low due to high percentage of residual fraction. 46.4% of Ni in tailings from Sangdong mine is probably leached under oxidized environment, and 39.4% of Cu in these tailings is readily extracted under strongly oxidized environment by organic fraction. According to leaching condition of pH 3.0 and pH 5.6, the amount of heavy metals leached out of coal wastes and tailing increases to 1/2 hours. At pH 3.0 and pH 5.6, concentration of Ni in tailing increases up three times of the initial value. Heavy metals released from coal wastes and tailing were not influenced significantly by leaching time.

• Transactions of Materials Processing
• /
• v.17 no.2
• /
• pp.91-96
• /
• 2008

The governing parameters affecting the fatigue properties have been investigated experimentally in the high carbon steel wires with 0.94 wt.%C. In order to find the crucial factors, the advanced analysis techniques such as optical 3-D profiler, focused ion beam(FIB) and transmission electron microscope(TEM) were used. The two-type steel wires with different drawing strain were fabricated. The fatigue properties were measured by hunter rotating beam tester, specially designed for thin-sized steel wires. It was found that the fatigue properties of the steel wires with high drawing strain was higher than that with other wires because of low residual stress and high adhesion condition of brass coating layer.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.171-177
• /
• 2007

In this paper, an evaluation method of fracture toughness on interface cracks was investigated in friction welded dissimilar materials with interfacial edge cracks. To establish a reasonable strength evaluation method and fracture criterion, it is necessary to analyze stress intensity factor under the load and residual stress condition on friction welded interface between dissimilar materials. The friction welded specimens with an edged crack were prepared for analysis of stress intensity by using the boundary element method (BEM) and the fracture toughness. A quantitative fracture criterion for friction welded STS 304/SM 45C with interface crack is suggested by using stress intensity factor, F and the results of fracture toughness experiment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.2
• /
• pp.201-210
• /
• 1999

Cyclones have been extensively used in the industry for removing fine particles from the gaseous streams, based on simplicity in design and construction in association with low cost and flexibility to operate in extreme and harsh environments. However, industrial cyclones are typically not very efficient for particles smaller than 10μm. In this work, in order to improve the separation efficiency of reverse flow cyclones, a simple device named Post Cyclone(Poc) in installed on the top of an existing cyclone. Thereby the residual swirl present at the outlet (vortex finder) of a conventional cyclone has been used to capture the escaped dust from the cyclone in the PoC. The performance of PoC was closely evaluated by changing configuration of the PoC and operation condition. In addition, the dust behaviour in th PoC was investigated based on the hypothesis of residual vortex.

• KSBB Journal
• /
• v.13 no.6
• /
• pp.675-680
• /
• 1998

In both 7L and 20L fermentor experiments the level of dissolved oxygen (D.O) strongly affected growth and PHBV production of Azotobacter vinelandii UWD. A higher D.O. increased carbon substrate consumption rate and cell growth rate with a similar residual biomass production. However, a lower D.O. was a much better condition for PHBV production. In a 20L fermentor experiments controlled at 5% D.O. cell growth rate was about twice faster(0.555 hr-1 and 0.260 hr-1 at the acid and the glucose phase, respectively) with an equal amount(4.5 g/L) of residual biomass production. However, PHBV content in the cell(62.3 wt%) increased 17.3 times at 1% D.O.