Emission Control of Fine Dust from Gas-Solid Cyclone

PoC 부착 싸이클론의 미세분진 유출 제어에 관한 연구

  • 조영민 (경희대학교 환경학과 및 환경연구소)
  • Published : 1999.04.01

Abstract

Cyclones have been extensively used in the industry for removing fine particles from the gaseous streams, based on simplicity in design and construction in association with low cost and flexibility to operate in extreme and harsh environments. However, industrial cyclones are typically not very efficient for particles smaller than 10μm. In this work, in order to improve the separation efficiency of reverse flow cyclones, a simple device named Post Cyclone(Poc) in installed on the top of an existing cyclone. Thereby the residual swirl present at the outlet (vortex finder) of a conventional cyclone has been used to capture the escaped dust from the cyclone in the PoC. The performance of PoC was closely evaluated by changing configuration of the PoC and operation condition. In addition, the dust behaviour in th PoC was investigated based on the hypothesis of residual vortex.

Keywords

References

  1. 한국대기보건학회지 v.14 no.1 대기 중 TSP와 PM10 농도의 관련성 최진수;백성옥
  2. Aerosol Sci. v.4 Cyclone collection efficrency; compatiosn of experimental results with theoretical predictions. Dirgo, J.;Leith, D.
  3. Soicety of Mechanical Eng. in Japan, B. no-93-0393 Cyclone dust collector with an Internal Perforated cylindrical tube Jiao,X.;Yamamoto,K.
  4. Environmental Strategies for the 21st century-an asia pacific conference Dust collection by post cyclone (PoC) to reduce the emission of reverse flow cyclone Jo,Y.M.;Ray,M.B.
  5. Chemical engineering v.7 New design approach boosts cyclone efficiency Koch,W.H.;Licht,W.
  6. AIChE Symp Series v.68 no.126 The collection efficiency of cyclone type particle collectors-A new theoretical approach Keith,D.;Licht,W.
  7. Mitre Corp. Interim report, EPA contract 68-02-1859 Evaluation of selected methods to assess the potential hazards associated with particulate emissions Mahar,M.;zummerman,N.
  8. Powder Technol. v.86 Development of a cyclone separation with new design Molerus, O.;Gluckler, M.
  9. 1. of Thermal Sci. v.2 no.2 Application of mechanical similarity laws to the collection efficiency of geometrically types of uni-flow cyclone dust collectors Ogawa, A
  10. Aerosol Science v.27 Post Cyclone, and Approach to a better efficiency of dust cyclones Plomp,A.;Bcumer,M.I.L.;Hoffmann,A.
  11. Ind. Eng Chem. Res. v.36 Post cyclone(PoC) an innovative way to reduce the emission of fines from industrial cyclones Ray, M.B.;Luning, P.E.;Hoffman, A.C.
  12. Ind. Eng. Chem. v.31 Flow pattern and pressure drop Shephered,C.B.;Lapple,C.E.
  13. Environmental Strategres for the 21st century-an asia pacific conference Numerical simulation of swirl flow in cyclone separator with an auxiliary device Venkata, K.R.;Ray, M B
  14. AIChE Symp Series v.68 no.126 The collection efficiency of cyclone type particle collectors-A new theoretical approach. Leith, D.;Licht, W.