• 한국경영과학회지
• /
• 제22권3호
• /
• pp.175-190
• /
• 1997

Organizational change projects such as Business Process Redisign (BPR) have been perceived to incur high risk due to their high management complexity, enterprise-wide impace, and steep project cost. This research intends to reduce such risk by developing a systematic process redesign methods, called Dynamic Process Modeling (DPM) method. DPM integrates the customer-oriented business process modeling technique with computerized visual simulation technique to promote better understanding of the target process and enable performance simulation of the proposed redesign alternatives prior to actual BPR implementations. For the cusstomer-oriented process modeling, we propose Dynamic-Event Process Chain (Dynamic-EPC) extending from the conceptual customer process model, Event-Process Chain (EPC). We compare DPM with four other implementation-level process modeling methods over eight criteria and demonstrate its effectiveness by applying it to the real-world hospital BPR case.

• 마이크로전자및패키징학회지
• /
• 제22권2호
• /
• pp.55-59
• /
• 2015

Novel low-volume solder-on-pad (SoP) process is proposed for a fine pitch Cu pillar bump interconnection. A novel solder bumping material (SBM) has been developed for the $60{\mu}m$ pitch SoP using screen printing process. SBM, which is composed of ternary Sn-3.0Ag-0.5Cu (SAC305) solder powder and a polymer resin, is a paste material to perform a fine-pitch SoP in place of the electroplating process. By optimizing the volumetric ratio of the resin, deoxidizing agent, and SAC305 solder powder; the oxide layers on the solder powder and Cu pads are successfully removed during the bumping process without additional treatment or equipment. The Si chip and substrate with daisy-chain pattern are fabricated to develop the fine pitch SoP process and evaluate the fine-pitch interconnection. The fabricated Si substrate has 6724 under bump metallization (UBM) with a $45{\mu}m$ diameter and $60{\mu}m$ pitch. The Si chip with Cu pillar bump is flip chip bonded with the SoP formed substrate using an underfill material with fluxing features. Using the fluxing underfill material is advantageous since it eliminates the flux cleaning process and capillary flow process of underfill. The optimized interconnection process has been validated by the electrical characterization of the daisy-chain pattern. This work is the first report on a successful operation of a fine-pitch SoP and micro bump interconnection using a screen printing process.

• Carbon letters
• /
• 제4권3호
• /
• pp.121-125
• /
• 2003

The Pt-Ru/Carbon as an anode catalyst supported on the commercial activated carbon (AC) having high surface area and micropore was characterized for application of Direct Methanol Fuel Cell (DMFC). The Pt-Ru/AC anode catalyst used in this experiment showed the performance of $600\;mA/cm^2$ current density at 0.3 V. The borohydride reduction process using $NaBH_4$, denoted as a process A, showed much higher current and power densities than process B prepared by changing the reduction and washing process of process A. The particle sizes are strongly affected by the reduction process than the specific surface area of raw active carbon and the sizes are almost constant when the specific surface area of carbon are over than the $1200\;m^2/g$. Smaller particle size of catalyst and more narrow intercrystalite distance increased the performance of DMFC.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권4호
• /
• pp.8-11
• /
• 2009

This study introduced wastewater treatment method by High Gradient Magnetic Separation (HGMS). HGMS treatment was high efficient method for various industrial wastewaters. The system is currently research state, but we have surveyed commercialize the technology for industry. In rolling plate process, coolant wastewater was recycled by sedimentation and sand filter system. It needs several large reservoirs and long time to remove suspended solid (SS) like metal fines and iron oxide in hot rolling plate making process. If removing rate of suspended solid in rolling coolant wastewater is improved by using HGMS system, the productivity of working process can be increased and the area of reservoir can be reduced. We manufactured high temperature superconducting HGMS system that had a purpose to treatment of coolant wastewater in rolling plate process. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel 430 mesh, which is a core component in the magnetic separation system, In our basic preliminary experiment using HGMS system, it has been clear that the fine paramagnetic particles in the coolant wastewater obtained from rolling plate process of POSCO can be separated with high efficiency.

• 한국물환경학회지
• /
• 제26권3호
• /
• pp.399-405
• /
• 2010

In order to quantify removal efficiency of Cryptosporidium in water treatment process and evaluate factors influencing removal efficiency of Cryptosporidium in each step of water treatment process, large pilot plant system ($100m^3/day$) and Cryptracer, surrogate of Cryptosporidium, were used. The removal efficiency of Cryptracer was around 0.8~1 log in coagulation process and 3.3~4.8 log in sand filtration process under ordinary environmental conditions. Factors influenced removal efficiency of Cryptracer were high fluctuate turbidity and water temperature. High fluctuate turbidity made difficult to adjust optimum PAC concentration, caused to drop removal efficiency of coagulation process (0.5 log). Inadequate coagulation process influenced to sand filtration process (2.1 log), caused to decline of removal efficiency in the whole process (2.6 log). Low temperature below $2^{\circ}C$ also influenced coagulation process (0.6 log). Therefore, It is shown that careful attention in the control of Cryptosporidium is needed in flood period, when high fluctuate turbidity would be, and winter period of low temperature.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.997-1001
• /
• 2016

Conductive ceramics are being developed to replace current Pt anodes in the electrolytic reduction of spent oxide fuels in pyroprocessing. While several conductive ceramics have shown promising electrochemical properties in small-scale experiments, their long-term stabilities have not yet been investigated. In this study, the chemical stability of conductive $La_{0.33}Sr_{0.67}MnO_3$ in $LiCl-Li_2O$ molten salt at $650^{\circ}C$ was investigated to examine its feasibility as an anode material. Dissolution of Sr at the anode surface led to structural collapse, thereby indicating that the lifetime of the $La_{0.33}Sr_{0.67}MnO_3$ anode is limited. The dissolution rate of Sr is likely to be influenced by the local environment around Sr in the perovskite framework.

• Journal of Microbiology and Biotechnology
• /
• 제28권2호
• /
• pp.293-297
• /
• 2018

Controlling the residual glucose concentration is important for improving productivity in $\text\tiny{L}$-threonine fermentation. In this study, we developed a procedure to automatically control the feeding quantity of glucose solution as a function of ammonia-water consumption rate. The feeding ratio ($R_{C/N}$) of glucose and ammonia water was predetermined via a stoichiometric approach, on the basis of glucose-ammonia water consumption rates. In a 5-L fermenter, 102 g/l $\text\tiny{L}$-threonine was obtained using our glucose-ammonia water combined feeding strategy, which was then successfully applied in a 500-L fermenter (89 g/l). Therefore, we conclude that an automatic combination feeding strategy is suitable for improving $\text\tiny{L}$-threonine production.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.120-126
• /
• 2005

We have proposed a characteristic method to estimate real composition when multi component oxide films are deposited by ALD. Final atomic concentration ratio was theoretically calculated from the film densities and growth rates for $HfO_2$ and $Al_2O_3$ using ALD processed HfxAhOz mms.W e have transformed initial source feeding ratio during deposition to fins] atomic ratio in $Hf_xAl_yO_z$ films through thickness factors ($R_{HFO_2}$ ami $R_{Al_2O_3}$) ami concentration factor(C) defined in our experiments. Initial source feeding ratio could be transformed into the thickness ratio by each thickness factor. Final atomic ratio was calculated from thickness ratio by concentration factor. It has been successfully confirmed that the predicted atomic ratio was in good agreement with the actual measured value by ICP-MS analysis.

• 대한산업공학회지
• /
• 제41권1호
• /
• pp.86-96
• /
• 2015

A lot of research works in the BPM area focuses on the development of new techniques in process mining. Even though the application of process mining to analyze real life process logs is important, only few case studies are available. Thus, in this paper, we conduct a case study on how to analyze a real life process log which comes from a Korean company in the heavy industry area. We analyze a customer service process that consists of a series of activities to enhance the level of customer satisfaction. In this case study, five research questions are derived based on collected questions from the company. Then we focus on bottleneck analysis, basic performance analysis and pattern analysis that are selected in order to answer the research questions. The analysis shows some abnormal behaviors in the process and possible ways to improve current processes are suggested.

• 지식경영연구
• /
• 제20권3호
• /
• pp.107-117
• /
• 2019

Successful start-ups are driven by opportunities, teams, and the resources needed to grow the business. Systematic business process management is required to maximize the efficiency of business operations. However, the existing entrepreneurial process research has limitations that it is difficult to intuitively and dynamically provide the necessary information for start-up operation, and it is necessary to define necessary information (resources, stakeholders, activities). In this study, we suggest the "Start-up Process Repository System" which overcomes limitations of existing entrepreneurial process research. The architecture for the Start-up Process Repository System provides five layers and enables each layer to interact four interfaces between each layer. This study improves start-ups' accessibility to the start-up business process repository created from the existing repository architecture and increases the utility derived from it by providing methodologies for components that offer useful start-up knowledge.