• Nuclear Engineering and Technology
• /
• 제56권5호
• /
• pp.1667-1671
• /
• 2024

This paper presents a neutron/gamma detector based on a micropixel avalanche photodiode and a plastic scintillator that monitors the status of the accelerator-driven intense resonance neutron source (IREN) facility by measuring the neutron/gamma intensity in the target hall. The electronics of the neutron/gamma detector has been designed and developed. The size of the plastic scintillator was selected to be 3.7 × 3.7 × 30 mm³ due to the sensitive area of the MAPD. The experimental results demonstrated a dependence between the count rate of the detector and the frequency of the accelerator. The detector is sensitive to intermediate and fast neutrons. The minimum detectable energy was determined to be 200 keV using Cs-137 point gamma source. The maximum counting rate of the detector from TTL out is about 2.2⋅10⁶ counts/sec, but for analogue output it is about 2⋅10⁷ counts/sec. The detector can not allow discriminating neutrons and gamma rays by charge integration method.

• 복식문화연구
• /
• 제24권3호
• /
• pp.315-323
• /
• 2016

The present study is intended to study sole types necessary for shoe designs for elementary school students that are in age groups in growth periods, and 3D midsole design utilizing 3D printing technology. This study analyzed data from the 3D measurement of the feet of 1,227 elementary school students aged 7-13 years residing in the capital region conducted as part of the 6th Anthropometry of Size Korea. In addition, 3D midsoles by sole type were designed utilizing a Rhino CAD, and midsole prototypes were output utilizing a Zortrax-M200 3D Printer. Through a cluster analysis of sole shapes by type, sole shapes were classified into three types. Type 1 has small values of foot lengths and foot breadths, with large toe 1 angles and high arch heights. Type 2 has intermediate values of foot lengths and foot breadths, with small toe 1 angles and high arch heights. Type 3 has large values of foot lengths and foot breadths with small toe 1 angles and low arch heights. On reviewing the results of design of 3D midsoles by sole type, it can be seen that the midsoles were designed according to characteristics by sole type. The results of the sole type analysis in the present study are expected to be meaningful as basic data for the development of shoe insoles for elementary school students.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권3호
• /
• pp.59-69
• /
• 2017

The best 'hub' to communicate with the citizen is using social media to marketing the business. However, there has several issued and the most common issue that face in critical is a capital issue. This issue is always highlight because most of automatic sentiment detection tool for Facebook or any other social media price is expensive and they lack of technical skills in order to control the tool. Therefore, in directly they have some obstacle to get faster product's feedback from customers. Thus, the personal online retailing need to struggle to stay in market because they need to compete with successful online company such as G-market. Sentiment analysis also known as opinion mining. Aim of this research is develop the tool that allow user to automatic detect the sentiment comment on social media account. RAD model methodology is chosen since its have several phases could produce more activities and output. Soppy tool will be develop using Microsoft Visual. In order to generate an accurate sentiment detection, the functionality testing will be use to find the effectiveness of this Soppy tool. This proposed automated Soppy Tool would be able to provide a platform to measure the impact of the customer sentiment over the postings on their social media site. The results and findings from the impact measurement could then be use as a recommendation in the developing or reviewing to enhance the capability and the profit to their personal online retailing company.

• 한국항해학회지
• /
• 제21권3호
• /
• pp.67-74
• /
• 1997

This paper described the method and the result of making a dynamic fiber optic gyrocompass measuring the heading angles of ships by processing the output signal from a constant rotating fiber optic sensor and also showed the measurement to test the performance of our system. Considerig an economical view we designed and ordered a cheap medium grade fiber densors increased not fiber length but the diameter of a fiber sensing loop. The scale factor and noise was 267mV/deg/s and 2 deg/hr/$\sqrt{Hz}(1{\sigma})$, respectively. We made the dynamic fiber optic gyrocompass by this sensor. We measured the heading angles in an arbitrary direction to evaluate the accuracy of our system and the root mean square error was $0.4^\circ$. Moreover, we measured the angles ineach direction of $45^\circ$. successive rotation to know whether this system has distoritions in a specific direction or not and the root mean square error in this case was $0.5^\circ$.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.158-158
• /
• 2019

Recent studies show the possibility of more frequent extreme events as a result of the changing climate. These weather extremes, such as excessive rainfall, result to debris flow, river overflow and urban flooding, which post a substantial threat to the community. Therefore, an effective flood model is a crucial tool in flood disaster mitigation. In recent years, a number of flood models has been established; however, the major challenge in developing effective and accurate inundation models is the inconvenience of running multiple models for separate conditions. Among the solutions in recent researches is the development of the combined 1D-2D flood modeling. The coupled 1D-2D river flood modeling allows channel flows to be represented in 1D and the overbank flow to be modeled over two-dimension. To test the efficiency of this approach, this research aims to assess the capability of HEC-RAS model's implementation of the combined 1D-2D hydraulic simulation of river overflow inundation, and compare with the results of GERIS and FLUMENS 2D flood model. Results show similar output to the flood models that had used different methods. This proves the applicability of the HEC-RAS 1D-2D coupling method as a powerful tool in simulating accurate inundation for flood events.

• 대한간호학회지
• /
• 제45권5호
• /
• pp.773-782
• /
• 2015

Purpose: The purpose of this study was to explore the experience of fluid management in hemodialysis patients by describing how they manage fluid intake and what affects fluid management. Methods: Purposive sampling yielded 11 patients who have received hemodialysis for one year or longer in one general hospital. Data were collected through in-depth interviews and analysed using Giorgi's phenomenological method. Data collection and analysis were performed concurrently. Results: The findings regarding how hemodialysis patients manage fluid intake were classified into four constituents: 'recognizing the need for fluid control', 'observing the status of fluid accumulation', 'controlling fluid intake and output', 'getting used to fluid management'. The factors that affect fluid management of hemodialysis patients were revealed as 'willpower', 'change in the mindset', 'support system', and 'emotional state'. Conclusion: The study results show that hemodialysis patients manage fluid intake through food and exercise as well as interpersonal relationships. These findings suggest that strategies in the development of nursing interventions for hemodialysis patients should be directed at assisting them in familiarization with fluid management based on an understanding of their sociocultural contexts.

• 대한의용생체공학회:의공학회지
• /
• 제39권5호
• /
• pp.220-228
• /
• 2018

The internal resistance of microbial fuel cell (MFC) using stainless steel skein for oxidizing electrode was investigated and the factors affecting the voltage generation were identified. We also investigated the effect of power management system (PMS) on the usability for MFC and the removal efficiency of organic pollutants. The performance of a stack microbial fuel cell connected with (PMS) or PMS+LED was analyzed by the voltage generation and organic matter reduction. The maximum power density of the unit cells was found to be $5.82W/m^3$ at $200{\Omega}$. The maximum current density was $47.53A/m^3$ without power overshoot even under $1{\Omega}$. The ohmic resistance ($R_s$) and the charge transfer resistance ($R_{ct}$) of the oxidation electrode using stainless steel skein electrode, were $0.56{\Omega}$ and $0.02{\Omega}$, respectively. However, the sum of internal resistance for reduction electrode using graphite felts loaded Pt/C catalyst was $6.64{\Omega}$. Also, in order to understand the internal resistance, the current interruption method was used by changing the external resistance as $50{\Omega}$, $300{\Omega}$, $5k{\Omega}$. It has been shown that the ohm resistance ($R_s$) decreased with the external resistance. In the case of a series-connected microbial fuel cell, the reversal phenomenon occurred even though two cells having the similar performance. However, the output of the PMS constantly remained for 20 hours even when voltage reversal occurred. Also the removal ability of organic pollutants (SCOD) was not reduced. As a result of this study, it was found that buffering effect for a certain period of time when the voltage reversal occurred during the operation of the microbial fuel cell did not have a serious effect on the energy loss or the operation of the microbial fuel cell.

• 유통과학연구
• /
• 제13권6호
• /
• pp.71-78
• /
• 2015

Purpose - This study attempts to analyze whether or not there are characteristics among the top management of companies that promote corporate performance at venture companies. It investigates the characteristics of the human and social capital that are inherent in top management at a venture company and conducts an empirical analysis of hypotheses examining if these characteristics will affect utilization of the governmental R&D support system as well as affect the firm's initial success. Research design, data, and methodology - This study conducted theoretical and empirical research together to accomplish the goal of the study. The pilot study researched human capital and social capital as the independent variables; the governmental R&D support system as the parameter; and, the initial success as the dependent variable. The empirical study carried out research on the model, establishment of hypotheses, and the statistical treatment. A survey was conducted targeting top management of high-tech venture companies in Daedeok Innopolis; 500 questionnaires were distributed; and, 222 were collected. Results - The human and social capital inherent in top management at venture companies in the early stages of their existence become good evaluation data for those who are invested in similar resources. If top management includes strong human and social capital, access to external resources will be easier; these will have a positive influence on the selection of overnmental support systems; and, this proper support will also have a positive influence on the initial success of the venture company. The results revealed the following. First, it was found that when the educational level and functional background, (the top management human capital), are the output function, top management human capital had a significant influence on selection of governmental R&D support funds. Second, it was found that the internal social capital and external social capital, (the top management social capital), had a significant influence on selection of governmental R&D support tasks. Third, it was found that selection of the governmental R&D support tasks at the start of the venture company had a positive influence on the corporate financial performance such as sales, business profits, and the increase in workers; and, had a significant influence on nonfinancial performance such as market share, competitive position, product competitiveness, and the future product development. Conclusions - Selection of the governmental R&D support system is not recognized as part of the direct sales of a venture company in its early stages, but as it can reduce costs for technical development and helps significantly in creating test products and mass production, it has a positive influence on the company's financial performance and nonfinancial performance as a result. Therefore, companies should take great efforts to frequently be selected as a candidate in the governmental R&D support system, as it can help facilitate R&D that requires extensive funds. As a result, companies can expect effects such as job creation and patent applications and they can advance future product sales.

• Spatial Information Research
• /
• 제2권2호
• /
• pp.107-116
• /
• 1994

코로플레스 지도는 지리사상의 지역간 분포 특성을 시각적으로 표현하는 지도이다. CMS는 코로플레스 지도 제작 프로그램으로 1988년에 처음 개발되었다. 본 연구에서는 최근 변화된 컴퓨터 기술과 사용자 환경을 고려하여 이에 적합한 CMS ll를 개발하였다. CMS ll는 IBM PC AT또는 상위 기종에서 실행되며 DOS 5.0 이상의 운영환경과 최소 640KB 이상의 메모리가 필요하다. 그래픽 해상력과 색상을 고려하여 그래픽보드로 VGA를 사용하고 고해상도의지도를 출력하기 위해 HP 호환의 레이저 ? 프린터를 지원한다. 코로플레스 지도를 효과적으로 디자인하기 위해 메뉴와 지도의 제목과 범례 등을 한글화하였고 한자의 사용도 가능하도록 제작하였다. 속성자료의 호환을 위해 DBF형식을 이용하였다.

• 대한전자공학회논문지TC
• /
• 제42권5호
• /
• pp.61-68
• /
• 2005

본 논문에서는 낮은 변환손실 특성의 94 GHz MIMIC(Millimeter-wave Monolithic Integrated Circuit) resistive 믹서를 설계 및 제작하였다. MIMIC resistive 믹서는 $0.1{\mu}m$ InGaAs/InAlAs/GaAs Metamorphic HEMT (High Electron Mobility Transistor)를 이용하여 설계 및 제작되었다. 제작된 MHEMT는 드레인 전류 밀도 665 mA/mm, 최대 전달컨덕턴스(Gm)는 691 mS/mm를 얻었으며, RF 특성으로 fT는 189 GHz, fmax는 334 GHz의 양호한 성능을 나타내었다. 94 GHz MIMIC 믹서의 개발을 위해 MHEMT의 비선형 모델과 CPW 라이브러리를 구축하였으며, 이를 이용하여 MIMIC 믹서를 설계하였다. 설계된 믹서는 본 연구에서 개발된 MHEMT MIMIC 공정을 이용해 제작되었다. 94 GHz MIMIC resistive 믹서의 측정결과 변환손실 특성은 94 GHz에서 8.2 dB의 양호한 특성을 나타내었으며, 입력 P1 dB는 9 dBm, 출력 P1 dB는 0 dBm의 결과를 얻었다. Resistive 믹서의 LO-IF 격리도는 94.03 GHz에서 15.6 dB의 측정 결과를 얻었다. 본 논문에서 설계 및 제작된 94 GHz MIMIC resistive 믹서는 기존의 W-band 대역 resistive 믹서와 비교하여 낮은 변환손실 특성을 나타내었다.