• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.1
• /
• pp.67-75
• /
• 2014

A full-scale static test for a composite structure small aircraft (KC-100) was conducted in the KARI. The test includes 15 full-scale test and 7 local test conditions. Test requirements with test schedule, test article with dummy structures, test load generation, test system, and equipment are introduced for the test. Test load data of the 1st test condition(U1) was analyzed to evaluate an accuracy of load control for the test. The analysis results show that load data obtained during test were within tolerance of Static Null Pacing Error(SNPE) and the error value of load control was 8.6N. The error of load controls for the full-scale static test using dozens of actuators was calculated by a method suggested by authors. Test data for all other test conditions is also shown in this paper. Finally, reactions measured from restraint system of the U1 test condition show that the reaction changes as load increment. The factors which may change the change of reactions for a full-scale static test are introduced in this study.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2010

The rapid economic development induced the massive road constructions, becoming bigger and high-speed of the vehicles. However, it brings lots of social problems, such as air pollutions, traffic noise and vibration. Special concrete block for the base course of asphalt pavement is needed to decrease traffic noise such as tire's explosive and vehicles sound, applying Helmholtz Resonators theory to asphalt pavement. If it is applied to the area where it happens considerable noise such as a junction, the street of a housing complex and a residential street, it is one of considerable method to solve the social requirements of noise problem. This research examines couple of laboratory tests for the sound absorption effect of the concrete block and the base concrete block. There are specimens which is fixed hall-size, space, depth as the condition of this research, and these are analysed of noise decrease effect using different condition of the first noise of each vehicle. As a result of analysis data according to vehicle noise volume, measurement distance, a form and size of the hall using the base concrete block, the use of special concrete base showed a good alternative solution for decreasing traffic noise level, from 4 dB to 9 dB.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.367-373
• /
• 2017

Pressurized membrane module systems, including hollow fiber type of Microfiltration (MF) and Ultrafiltration (UF) membranes are being increasingly used in drinking water treatment due to their high removal efficiency of pathogen. However, when fibers are damaged in pressurized membrane system, the pathogen will be able to penetrate the membrane. Therefore, it is essential to guarantee the regulatory requirements for water quality by an effective on-line or off-line condition integrity monitoring methods. Recently, pressure decay test (PDT) which is one of membrane integrity tests has been reflected to drinking water treatment plants using pressurized membrane module. In this paper, three different method were used to perform PDT and three different sensitivity values were analyzed through experiments. Three types of direct integrity test methods were applied to pressure feed side, filtrate side and bidirectional pressure decay test. The results of these experiments show that the sensitivity was increasing when the volume of pressurized gas was decreasing. The sensitivity is inversely proportional to the gas volume. Furthermore, it is desirable to increase pressure difference between feed side and permeate side in order to achieve higher sensitivity in the PDT by membrane damage.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.1
• /
• pp.23-49
• /
• 2007

The purpose of this study is to investigate the relationships among customer satisfaction, trust, and loyalty and examine the differences and similarities between specialized and general merchandise internet shopping malls concerning the relationships of these key success factors. The structural model is tested with each of the sub-samples(i.e., specialized and general merchandise shopping customers taken separately) and the data from entire data samples(i.e., specialized and general merchandise shopping customers pooled together). The same research model was used in analysing general merchandise, specialized, and integrated internet shopping mall to reveal and compare the casual path constructs. In the analysis of path coefficients composed of separated taken sample, all research hypothesis is accepted and the model's goodness of fit also shows all high. In the basis of the previous empirical test, multiple sample method was used. Properties of the causal paths, including standardized path coefficients, the significance of difference, latent correlations and variance explained for satisfaction, trust and loyalty in the hypothesized model, have similarities in general. This means that the proper structural management concerned with customer satisfaction, trust and loyalty is very crucial for the success of all kinds of internet shopping malls. Following the model test, I conduct a test of integrated model's path coefficients. Statistical results show that all the hypothesis concerned with internet shopping malls were accepted like the separated sample test. Click and mortar companies should clearly understand and articulate the key requirements of shopping mall satisfaction, trust and loyalty and encourage to establish linkage and interactive relationship among the research variables. In addition, internet marketers are required to customize the interaction considering and adapting the patterns of internet shopping malls. Other interesting results concerning the strategies in internet shopping malls strategy are also presented.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.200-214
• /
• 2014

Technology planning is becoming increasingly important with the rapid development and decline of technology. Technology roadmapping is a tool used to select whether the specific technique of technology planning should pursue which technology and in which time. This technology is important to secure the uncertain future since it will provide a method that is able to share the goals and strategies between organizations. Therefore, technology tree in the planning stage of the problem would be a very useful tool. In this study, both domestic and international technology tree application cases were analyzed to be able to derive a plan for ensuring that the research performed and the requirements are met for the future development and implementation of a convergence portal system. The six major systems that aim at water hazard information platform are basic information providing system, analysis information providing system, water disaster theme providing system, national disaster information system, water disaster augmented reality system and open information platform system. General standardized core technologies corresponding to the needed functions in each target system are derived through brainstorming, and classified according to the technology field to derive the technology tree.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.6-12
• /
• 2011

The fast growing of the number of users requires the development of reliable communication systems able to provide higher data rates. In order to meet those requirements, techniques such as Multiple Input Multiple Out (MIMO) and Orthogonal Frequency Division multiplexing (OFDM) have been developed in the recent years. In order to combine the benefits of both techniques, the research activity is currently focused on MIMO-OFDM systems. In addition, for a fast wireless channel environment, the data rate and reliability can be optimized by setting the modulation and coding adaptively according to the channel conditions; and using sub-carrier frequency, and power allocation techniques. Depending on how accurate the feedback-based system obtain the channel state information (CSI) and feed it back to the transmitter without delay, the overall system performance would be poor or optimal. In this paper, we propose a Signal to Noise Ratio (SNR) estimation algorithm where the preamble is known for both sides of the transciever. Through simulations made over several channel environments, we prove that our proposed SNR estimation algorithm is more accurate compared with the traditional SNR estimation.

• Journal of Digital Contents Society
• /
• v.16 no.2
• /
• pp.307-316
• /
• 2015

Although the use of CAD and CAM technologies has been broadly adopted by architecture-engineering- construction-facility management (AEC/FM) industry as the means of producing complex forms, there are still remained issues such as reducing cost, and enhancing quality and manufacturability. In this paper, to resolve given issues, we suggest a process of rationalization in digital architecture design and fabrication as an integrated approach. The rationalization, which is usually used as the term related with the skin panel of free-form architecture, is a process of re-designing a digital model to meet the requirements of manufacturing considering the gap with an original designs. Thus we classified this process and conducted a case study of fabricated models as an exploratory study. As the result, we found that each phase is connected with other phases with the circulation of information and rationalization process can be determined as the circulative process which re-designs digital model by minimally deviating from the original design based on the information deducted from analysis of inter-compatability of software and requirement of hardware.

• Journal of The Korean Association For Science Education
• /
• v.37 no.2
• /
• pp.263-271
• /
• 2017

Teacher reeducation is required to be comfortable with the 'Integrated science' subject as introduced in the 2015 revised curriculum. In this research, we designed in-service teacher training programs according to the types of secondary school science teacher's certificates, and developed ways to improve in-service science teachers' competencies. Through Delphi surveys with 22 science education experts, we investigated the features of the 2015 revised 'Integrated science' curriculum in light of its characteristics, purposes, contents system, contents, and so on, and explored teachers' competencies to teach the subject. Based on the analysis of the features of each type of secondary school science teachers' certification and required teacher competencies for teaching 'Integrated science', we developed three types of teacher training programs: in-service training courses for understanding the 2015 revised 'Integrated science' (Type A), in-service training courses for 'Integrated science' (Type B), and in-service teacher training certificate program for 'Integrated science' (Type C). For each teacher training program, we suggested the target of the training program in light of teacher certificates, operation systems, and ways to organize the program. In addition, we also suggested ways to improve 'Integrated science' teacher education programs for pre-service as well as in-service teachers, and examined ways to improve educational requirements for qualification in 'Integrated science' teaching based on the opinions of experts. Discussed in the conclusion are ways to design in-service teacher training programs for 'Integrated science' teaching and ways to improve 'Integrated science' teacher training.

• Journal of The Korean Association of Information Education
• /
• v.11 no.3
• /
• pp.339-347
• /
• 2007

Along with developments of information and communication technologies, internet has spread not only all over the society, but also our everyday life deeply. Recently, requirements for e-learning using internet in the educational aspect have a great influence on the changes of school educations. Cyber Home Learning System, in particular, has been implemented throughout the nation for the purpose of reducing private expenditure for education and promoting substantial improvements in quality of public education. However, there have been exposed many problems with respect to quality of operations and managements of the system comparing to its quantitative growth, and so, at this point in time, researcher conducted analysis of actuality of perceptions of both elementary and middle school teachers with a focus on the case of S System in K province. To test this, total 278 participants were sampled from the elementary schools (139 teachers) and the middle schools (139 teachers) located in K province and were asked to complete a survey and the results therefrom were analyzed accordingly. Results from the analyses revealed that elementary school teachers responded more positively than other respondents in the most areas, including supply of a variety of learning contents of S System, quality of contents, and providing for helps insomuch as to complement school works, etcetera. In addition, researcher has found out that, to make the system become all the more efficient, it shall be required to establish a strategy in order to induce students' interest in the system, as well as to construct infrastructure for facilitating the use of computer. And that there are also needs for continuous supports from both the school and the education authority concerned, and for method of flexible operation of curriculum.

• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.295-304
• /
• 2013

Ultra-High Performance Concrete (UHPC) has recently been one of the most active research fields in Korea as well as in foreign countries, because it can contribute to a longer life and economic efficiency of structures. Although precast-type UHPC fabricated in a factory is preferable in terms of quality control and reduction of construction period, there exist, even in the precast structure, some parts that need to be cast in-place such as the joints between precast segments. In the cast-in-place UHPC, however, it is probable that an optimum curing condition can hardly be realized in contrast to the factory production. In this study, therefore, the trend of compressive strength development of UHPC was experimentally investigated by assuming various inferior curing conditions that may be anticipated at a construction site. Concrete specimens were fabricated and cured under different conditions with the variables such as curing temperature, delay time before the initiation of curing, duration of curing time and moisture condition. The strengths were compared with those of the specimens cured by standard high temperature steam. Through the analysis of the test results, some minimum requirements for curing have been proposed that are required when the UHPC is cast in-place. It is expected, through this study, that practical use of UHPC in construction sites can be increased.