• Journal of the Korean Society for Railway
• /
• v.9 no.3 s.34
• /
• pp.330-334
• /
• 2006

To maintain design-knowledge database and manage configuration for requirement of performance tests and safety standards of High Speed Railway(HSR), It is established that management system of performance tests and safety standards and then constructed that design-knowledge database and documented a performance test and safety specifications for supporting performance test and safety system using Model-Based Systems Engineering(MBSE) tool.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.41-49
• /
• 2014

In this paper, we consider a method to access the number of aircraft requirement which is a strategic variable in national security. This problem becomes more important considering the F-X and KF-X project in ROKAF. Traditionally, ATO(Air Tasking Order) and fighting power index have been used to evaluate the number of aircrafts required in ROKAF. However, those methods considers static aspect of aircraft requirement. This paper deals with a model to accommodate dynamic feature of aircraft requirement using absorbing Markov chain. In conclusion, we suggest a dynamic model to evaluate the number of aircrafts required with key decision variables such as destroying rate, failure rate and repair rate.

• East Asian Economic Review
• /
• v.17 no.3
• /
• pp.311-332
• /
• 2013

This paper examines the effect of initial margin requirements on long-run and short-run volatilities in the Japanese stock market using the Component GARCH model. Our empirical results show that when we do not divide the margin requirement into positive and negative changes, increasing margin requirement is effective for reducing long-run volatility, while not effective in short-run volatility. However, separating the positive and negative changes in margin requirements reveals the fact that the negative changes in margin requirements decrease long-run volatilities, while the higher margin requirements increase short-run volatilities in the Japanese stock market. This suggests that if the Japanese financial authorities intend to increase margin level to reduce volatility, unexpectedly, short-run volatility would be even higher.

• Journal of Biosystems Engineering
• /
• v.10 no.1
• /
• pp.69-75
• /
• 1985

For the purpose of estimating the operating cost for feed production, energy consumption, labor requirement, maintenance cost, and supplies and miscellaneous costs are analyzed and developed as mathematical models. Mathematical model for energy usage Consists of electrical energy, boiler fuel energy and vehicle fuel energy. The mathematil model for electrical energy usage for the swine and poultry feed mill and the complete pelleted feed mill are developed, based on the general model mill and the computer program for its design developed in Kansas State University (Park, 1982). Also, the boiler fuel energy consumption model and the vehicle fuel energy consumption model are developed by analyzing the boiler system and the vehicle operation in the warehouse. In order to develop a mathematical model for labor requirement, the data that Vosloh (1968, 1976) constructed for labor requirement in his model mill are used by assuming that his model mill is similar to this model, in terms of labor assignment standards. Maintenance and repair costs are obtained by assuming to be 5.5% of the total capital investment cost. Also, supplies and miscellaneous costs are estimated by using Vosloh's report and it is approximately 0.87 dollars per ton based on daily production.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3075-3085
• /
• 2000

According to distributed, large-caled environment of software development and operation, the elicitation and specivication of correct and complete requrement is the most important factor for the system. In addition contiuous and dramatic systerm canging requests in cooperative environment with internet require more efficient, requirement management. In this paper we detine the specification architecture and techruques for requrements, so that we improve the efficiency ofnatural language-based requirement speciticationand management in a cooperatie work environment. Also, we propose a software requirement engineering process model and environment based on requirements in a CSC@(Computer Supported Cjooperative Work) environment, therefore transfer them into analysis phase.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.1-14
• /
• 1981

A laboratory model test was carried out with a newly designed model to figure out the vibration characteristics of the vibratory tillage tool according to the method of forced vibration, i.e., horizontally and vertically forced vibrations. The results are summarized as follows: 1. The reduction ratios of the draft force of the vibratory blade were 14.2-42.6% for the case where the vibration was forced parallel to the travelling direction of the blade, and 15-54.5% for the vertically forced vibration. And it was thought that the method of vertically forced vibration was preferable to the reduction of the draft force. 2. The ratio of the draft force of a vibratory blade to that of a static one could be represented as a function of V/At. It was found to be possible to reduce the draft force by taking a lower value of (V/Af) and this meant that the effictiveness of tillage practice using the vibratory system would be limited. 3. The torque to the main rotating shaft to vibrate the model blade increased frequency and amplitude. This tendency varied according to the physical properties of tested soil. In case of horizontally forced vibration, the torque was 8~34% less than in case of vertically forced vibration. 4. With the increase of frequency, the total power requirement increased linearly, and also the portion of oscillating power requirement in the total power tended to increase. The magnitude of the total power requirement was 1.4-13 times greater than that of a static one for the case of horizontal vibration, and 1.5-15 times greater for the case of vertical vibration. It was thought that the horizontal vibration of the blade was preferable to the vertical vibration in view of the power requirement. 5. A linearity was found between the amplitude of moment oscillogram and magnitude of oscillating acceleration. Only positive values of moment occurred when the blade was forced to vibrate vertically, but negative values occurred in rarity in the case of amplitude A3 when the blade was forced to vibrate horizontally.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.35.1-40
• /
• 2001

This study is on the behavior analysis which can define and verify a system requirement through a behavior diagram for High speed rail system. The model considered in this study is limited to the preconditioning control of the control system specification for HSRS. To build an executable model, requirements should be decomposed first into leaf node requirements. The behavior model is composed of input, output, and functions which are linked with leaf node requirements. It is important that a single requirement must specify a single Auction. Using the developed executable model and the traceability between requirements and functions, this study found out a lot of static and dynamic inconsistency, missed and derived requirements. This is to develop and executable behavior model to do functional analysis and be able to verify the integrity of a specification.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.620-621
• /
• 2015

In this study, the multi-criteria decision-making model based on Quality Function Deployment Method is proposed. Multicriteria decision-making is an attempt to link QFD method with the TOPSIS. By this effort, a model that makes client's decision-making more rational and objective in design phase is suggested. The multi-criteria decisionmaking model confirming to the Owner's requirements will improve the productivity of the construction industry and the satisfaction of the customer. Further study extending the range of the requirements, not only the Owner's requirement will be necessary to cover the various factors as much as possible. And then, finally as a flexible platform to achieve a sustainable quality management, web-based multi-criteria decision-making model can be utilized by the relevant stakeholders simultaneously with the feed-back and sharing the necessary informations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.2
• /
• pp.178-184
• /
• 1997

Purified diets containing five graded levels of lysine were fed to a total of 125 growing chicks (25 chicks per treatment) to evaluate lysine requirements for growth and maintenance. A model was developed to separate lysine requirement for maintenance from requirement for growth. Based on weight gain response, the daily lysine requirement for growth was 12.06 mg/g gain and the daily lysine requirement for maintenance was 0.332 times metabolic body size ($W^{0.75}$). Similarly, the lysine requirement for growth was 0.457 mg/mg nitrogen gain and the daily lysine requirement for maintenance was 0.344 times metabolic body size. The plateau of plasma lysine concentration was reached at 354.75 mg intake/day. The total lysine requirement was 414.27 mg/day or 1.0% of the diet, 420.11 mg/day or 1.01% of the diet based on weight gain response and N gain response, respectively. Previous lysine requirements for growing chicks of 1-28 days old were in close agreement with these estimates. As a percentage of protein, lysine requirement was calculated to be 7.3% and the reported lysine content of chick muscle crude protein of 7.46% was closely related.

• The KIPS Transactions:PartD
• /
• v.17D no.1
• /
• pp.41-52
• /
• 2010

A relation between generated test cases and an original requirement is important, but it becomes very complex because a relation between requirement models and requirements are m-to-n in automatic test case generation based on models. In this paper, I suggest automatic generation technique for REED (REquirement EDitor), 1-to-1 requirement modeling tool. Test cases are generated though 3 steps, Coverage Target Generation, IORT (Input Output Relation Tree)Generation, and Test Cases Generation. All these steps are running automatically. The generated test cases can be generated from a single requirement. As a result of applying to three real commercial systems, there are 5566 test cases for the Temperature Controller, 3757 test cases for Bus Card Terminal, and 4611 test cases for Excavator Controller.