• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.10
• /
• pp.738-746
• /
• 2019

Instead of hydraulic actuation systems, an electromechanical actuation system is more efficient in terms of weight, cost, and test evaluation in the thrust vector control of the 7-ton gimbal engine used in the Korea Space Launch Vehicle-II(KSLV-II) $3^{rd}$ stage. The electromechanical actuator is a kind of servo actuator with position feedback and uses a BLDC motor that can operate at high vacuum. In the case of the gimballed rocket engine, a synthetic resonance phenomenon may occur due to a combination of a vibration mode of the actuator itself, a bending mode of the launcher structure, and an inertial load of the gimbals engine. When the synthetic resonance occurs, the control of the rocket attitude becomes unstable. Therefore, the requirements for the stiffness have been applied in consideration of the gimbal engine characteristics, the support structure, and the actuating system. For the 7-ton gimbal engine of the KSLV-II $3^{rd}$ stage, the stiffness requirement of the actuation system is $3.94{\times}10^7N/m$, and the direct drive type electromechanical actuator is designed to satisfy this requirement. In this paper, an equivalent stiffness analysis model of a direct drive electromechanical actuator designed based on the stiffness requirements is proposed and verified by experimental results.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.1
• /
• pp.75-82
• /
• 2007

When one forecasts urban water demand in a long-term, multivariate model can give more benefits than per capita requirement model. However, the former has shortcomings in that statistically high explanatory power cannot be obtained well, and change in customer behavior cannot be considered. If the past water consumption effects the future water demand, dynamic model may describe real water consumption data better than static model, i.e. the existing multivariate model. On these grounds, this study built dynamic model using system dynamics. From a case study in Seoul and Busan city, dynamic model was expected to forecast water demand more descriptively and reliably.

• Journal of Animal Science and Technology
• /
• v.62 no.5
• /
• pp.628-637
• /
• 2020

In poultry diets, a requirement of crude protein is one of the most important factors in poultry productivity. Besides, the Pekin duck requirement of crude protein is still not clear. This experiment was conducted to determine the crude protein requirement of Pekin duck on diet formulation by investigation of growth performance, carcass trait, and analysis of blood parameter for a hatch to 21-day (d) of age. A total of 432 male White Pekin ducks were randomly allocated to six levels of crude protein (i.e., 15%, 17%, 19%, 21%, 23%, and 25%) to give six replicate pens per treatment with 12 ducklings per each pen. Body weight and feed intake were measured weekly by calculating feed conversion ratio and protein intake. Two ducklings each pen was euthanized via cervical dislocation for analysis of carcass trait and plasma blood on 21-d of age. Data were applied on both prediction linear-plateau and quadratic-plateau models by estimation of the crude protein requirements. Data were applied on both prediction linear-plateau and quadratic-plateau models by estimation of the crude protein requirements. The level of crude protein requirements of Pekin ducks for 21 days after the hatch was estimated to be 20.63% and 23.25% diet for maximum daily gain, and minimum feed conversion ratio, respectively.

• Korean Journal of Construction Engineering and Management
• /
• v.3 no.4 s.12
• /
• pp.114-122
• /
• 2002

Earned Value Management System(EVMS) is a management technique that is emerging as a valuable tool in the management of all projects, including and in particular construction projects. It is based on C/SCSC that has been released by the U.S. Department of Defense (DOD) in 1967. In a project that employs the earned value management concept, the project's measurable performance plans will be formed with the creation of CAPs. The formation of CAPs is a planning step necessary to form an earned value baseline. In this paper, a method is proposed to form CAPs using Material Requirement Planning(MRP) that is also known as a useful planning tool in the manufacturing industry. An application to a real project has been carried through workpackaging model.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.410-415
• /
• 2001

Earned Value Management System(EVMS) has been considered as a useful tool of managing construction projects lately and its instruction into a private industry is now under consideration by the Korean government. It is on the basis of C/SCSC that had been released by the U.S. Department of Defense(DOD) since 1967. Its research has been in the active progress in order to utilize the earned value concept as a project management tool for construction project ordered by both government and private sector. Material Requirement Planning(MRP) is also known as a tool of planning and scheduling resources for assembly product as a part of inventory control models in the manufacturing industry. The purpose of this study is the effective employment of Earned Value Management to manage the construction projects by utilizing Material Requirement Planning(MRP), based on project management software and Workpackaging model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1568-1574
• /
• 2009

One of the most difficult problems in user requirement engineering is the communication gap that exists between different end-users, stakeholders, and software engineers. Since scenarios allow different stakeholders to describe and review the problem in their own language instead of some abstract model, they are also a solution to the problem. We propose a progressive, iterative and interleaved process of using scenario at different requirement engineering stages including elicitation, analysis and validation. This process model has been applied to our TRES System. In our proposed system, we combine prototype, scenarios and use cases in a single and comprehensive framework to avoid most of the shortcomings in other tools. Our system is an XML-based system for scenario-driven requirement engineering. Within the TRES system, scenarios are stories capture information about users and their tasks, including the context of use. In our TRES system, scenarios are stored in XML-based database and described using XML notation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.5
• /
• pp.1-10
• /
• 2019

Due to the climate change the drought had been occurring more frequently in recent two decades as compared to the previous years. The change in the pattern and frequency of the rainfall have a direct effect on the farming sector; therefore, the quantitative estimation of water supply is necessary for efficient agricultural water reservoir management. In past researches, there had been several studies conducted in estimation and evaluation of water supply based on the irrigational water requirement. However, some researches had shown significant differences between the theoretical and observed data based on this requirement. Thus, this study aims to propose an approach in estimating reservoir rate based on empirical method that utilized observed reservoir rate data. The result of these two methods in comparison with the previous one is seen to be more fitted for both R2 and RMSE with the observed reservoir rate. Among these procedures, the method that considers the drought year data shows more fitted outcomes. In addition, this new method was verified using 15-year (2002 to 2006) linear regression equation and then compare the preceeding 3-year (1999 to 2001) data to the theoretical method. The result using linear regression equation is also perceived to be more closely fitted to the observed reservoir rate data than the one based on theoretical irrigation water requirement. The new method developed in this research can therefore be used to provide more suitable supply data, and can contribute to effectively managing the reservoir operation in the country.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.62-68
• /
• 2002

To satisfy the requirement of the one axis linear positioning system, which is following control of the desired trajectory without following error and is the high positioning accuracy, feed-forward loop having cogging force model is proposed. In the one axis linear positioning system with linear PM motor, cogging force acting as disturbance is modeled analytically. Analytic model of cogging force is verified by result measured from positioning system constructed with linear PM motor. Measured result is very similar with proposed analytic model. Cogging force model is used as feet forward loop in control scheme of linear positioning system. Cogging force feed-forward'loop is obtained from analytic model of cogging farce. Trajectory following error is reduced from 300nm to 100nm by applying the proposed cogging farce feed-forward loop. By using analytic model of cogging force, the control scheme is simplified. Also this analytic model is applicable to calculation of characteristic value of positioning system in design process.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.2
• /
• pp.93-99
• /
• 2012

For speech coding, a vocal tract is modeled using Linear Predictive Coding (LPC) coefficients. The LPC coefficients are typically transformed to Line Spectral Frequency (LSF) parameters which are advantageous for linear interpolation and quantization. If multidimensional LSF data are quantized directly using Vector-Quantization (VQ), high rate-distortion performance can be obtained by fully utilizing intra-frame correlation. In practice, since this direct VQ system cannot be used due to high computational complexity and memory requirement, Split VQ (SVQ) is used where a multidimensional vector is split into multilple sub-vectors for quantization. The LSF parameters also have high inter-frame correlation, and thus Predictive SVQ (PSVQ) is utilized. PSVQ provides better rate-distortion performance than SVQ. In this paper, to implement the optimal predictors in PSVQ for voice storage devices, we propose Multi-Frame AR-model based SVQ (MF-AR-SVQ) that considers the inter-frame correlations with multiple previous frames. Compared with conventional PSVQ, the proposed MF-AR-SVQ provides 1 bit gain in terms of spectral distortion without significant increase in complexity and memory requirement.

• The Journal of Information Systems
• /
• v.27 no.1
• /
• pp.43-65
• /
• 2018

Purpose The emergence of mobile applications has simplified our life in various ways. Regarding tourism activities, mobile applications are already efficient in providing personalized tourism related information and are very much effective in booking hotels, flights, etc. However, there are very few studies on classifying the actual service requirements and improving the customer satisfaction in mobile tourism applications. The purpose of this study is to implement a practical mobile tourism application. To serve the purpose, we classify and categorize the service requirement of mobile tourism applications in Korea. We employed Kano model and analytic hierarchy process (AHP). Specifically, we conducted a focus group study to find out the service requirements in mobile tourism applications. Design/methodology/approach The data for this study were collected from Koreans and Foreigners who has the experience using mobile tourism applications. Participants needed to be familiar with mobile tourism applications because such users may be more aware of the mobile tourism applications services. We analyzed 147 valid data using Kano model and conducted AHP analysis on five experts in the field of tourism using Expert Choice software. Findings In this paper, we identified the 17 service quality requirements in the mobile tourism applications. The results reveal that the service requirement such as Geo-location map, Multilingual option, Compatibility with different operating systems were unavoidable service, absent of such requirements leads to the dissatisfaction. Based on the results of the integrated application of both Kano model and AHP analysis, this study provide specific implications for improving the service quality of the mobile tourism applications in Korea.