• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.156-162
• /
• 2011

To evaluate the bonding performance of reinforced glulam, the textile type of glass fiber and aramid fiber, and the sheet type of glass fiber reinforced plastic (GFRP) and carbon fiber reinforced plastic (CFRP) were used as reinforcements. The reinforced glulam was manufactured by inserting reinforcement between the outmost and middle lamination of 5ply glulam. The types of adhesives used in this study were polyvinyl acetate resins (MPU500H, and MPU600H), polyurethane resin and resorcinol resin. The block shear strengths of the textile type in glass fiber reinforced glulam using MPU500H and resorcinol resin were higher than 7.1 N/$mm^2$, and these glulams passed the wood failure requirement of Korean standards (KS). In case of the sheet types, GFRP reinforced glulams using MPU500H, polyurethane resin and resorcinol resin, and CFRP reinforced glulams using MPU500H and polyurethane resin passed the requirement of KS. The textile type of glass fiber reinforced glulam using resorcinol resin after water and boiling water soaking passed the delamination requirement of KS. The only GFRP reinforced glulam using MPU500H after water soaking passed the delamination requirement of KS. We conclude that the bonding properties of adhesive according to reinforcements are one of the prime factors to determine the bonding performance of the reinforced glulam.

• Korean Journal of Agricultural Science
• /
• v.31 no.1
• /
• pp.26-34
• /
• 2004

In this study, motion characteristics and power requirement of rotary tilling according to shape of conventional rotary blade were measured. This study was performed to establish factors which needed to develop energy saving rotary blade. Starting point of edged curve of imported rotary blade was faster than that of domestic rotary blade after measuring and analyzing edged curve of rotary blade. So domestic rotary blade tills much soil than imported rotary blade. In analyzing motion of rotary blade, Rotary blade of A, D type was begun to contact at part 3. Analyzing back surface of rotary blade which contact to soil at critical $\lambda$ results in contacting at e-f part. In measuring power requirement of rotary blade, specific torque and specific work of rotary blade are $160{\sim}170kgf{\cdot}m/m^2$, $3,700kgf{\cdot}m/m^3$. It shows power requirement of rotary blade according to shape of rotary blade are very different.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.2
• /
• pp.121-130
• /
• 2008

The concept of integrated product information has been universalized so that many manufacturing industries have applied the concept to their production system. The field of PDM (Product Data Management), which is one of the core components of the integrated product information, is not an exception. Therefore, various PLM (Product Lifecycle Management) software providers are in process of suggesting the PDM solutions. As the PDM solution is widely adopted in the manufacturing industries, the successful application of the solution has been gathering more strength in manipulation of the product information. However, the standardized implementation methodology is stuck in the basic level contrast with the enhanced PDM's functionality and capability. Present study refers to the application of UML (Unified Modeling Language), which is an object oriented modeling description, to PDM system development procedure. The advantage of UML is its efficiency and effectiveness in handling complex requirement often found in PDM implementation works. This paper shows the integration of PDM and UML proposes a philosophy for the support of requirement analysis throughout the full implementation of PDM system.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3075-3085
• /
• 2000

According to distributed, large-caled environment of software development and operation, the elicitation and specivication of correct and complete requrement is the most important factor for the system. In addition contiuous and dramatic systerm canging requests in cooperative environment with internet require more efficient, requirement management. In this paper we detine the specification architecture and techruques for requrements, so that we improve the efficiency ofnatural language-based requirement speciticationand management in a cooperatie work environment. Also, we propose a software requirement engineering process model and environment based on requirements in a CSC@(Computer Supported Cjooperative Work) environment, therefore transfer them into analysis phase.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.3
• /
• pp.207-214
• /
• 2011

Ship design requirements described in the building specification should be reflected in the design process. This paper identifies the configuration of requirements mentioned in the building specification using Ontology Representation Language (OWL). Ontology-based semantic search system specifies the requirement items. Through this extraction, building specifications mentioned for each entry are configured to the tree. Tracking requirements for ship design and a set of procedures to instruct is also used for the V model of systems engineering. The semantic search engine of robot agent and ontology can search the requirements specification document and extract the design information. Thereafter, design requirements for the tracking model that proposes the relationship between the associated BOM(bill of material) and product structure.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.281-286
• /
• 2007

Needs of fuel's performance evaluation for the dual-cooled fuel pellet (annular shape) necessitate the irradiation test in the test reactor. Irradiation test rig for the HARARO reactor, which is a special-purposed equipment used for material, irradiation and creep test, must satisfy the operational requirement on the hydraulic characteristics and structural integrity. In this paper, pressure drop and flow-induced vibration test for the newly developed non-instrumented test rig were carried out using FIVPET as a out-pile evaluation test. The test results show that the new test rig satisfy the HANARO operational requirement with sufficient margin. The spectral response characteristics of the flow-induced vibration of the test rid were also discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.226-229
• /
• 2008

To investigate an in-pile behavior of the newly developed DUO fuel pellet, the irradiation test will be carried out in the domestic test reactor. Irradiation test capsule for the HANARO reactor, which is a specially designed equipment used for material, irradiation and creep test, must satisfy the operational requirement on the hydraulic characteristics and structural integrity. In this study, a pressure drop, a flow-induced vibration and a short-term endurance test for the newly developed non-instrumented test capsule were carried out using FIVPET as a out-pile evaluation test. The test results show that the new test rig satisfy the HANARO operational requirement with sufficient margin.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.537-540
• /
• 2005

The attitude control, sensors and camera installed on the spacecraft should be located according to the system alignment requirement. The alignment measurement requirement accuracy for the sensors should be below $\pm$0.1. Therefore, Alignment Measurement System which is combined theodolite, Rotating table and digital inclinometer etc., should be used. As the measurement accuracy is required very precise, the appropriate measurement procedure and alignment angle measurement, calculation and shimming work should is accomplished. Consequently, this paper is accomplished the works to align the measurement requirement accuracy throughout alignment measurement and shimming work of installed module and sensor

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.123-126
• /
• 2005

We develop the evaluation method of functional requirements for excavator design. The functional requirement of the product can be deduced from voice of customer. QFD method is used in order to convert customer requirement to functional requirement. The measure of information index is used to evaluate quantitatively the product quality characteristics. The correlation score between customer requirements and functional requirements and benchmarking score of competitors are basic data for the measure of information.

• IE interfaces
• /
• v.17 no.3
• /
• pp.261-268
• /
• 2004

The primary goal of the requirement analysis phase during information system development is to identify and document what is really needed, in a form that clearly communicates to the user and to development team members. Presented in this paper is a QFD(Quality Function Deployment)-based requirement analysis method and procedure for developing a large-scale enterprise information system. For the purpose of elicitation of software functional requirements, this paper adopts the method of HOQ(House Of Quality) and proposes a simplified HOQ which is more suitable for the software requirement analysis. As a result of this paper, it suggests desired functionalities for an integrated design &manufacturing information system.