• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.19-26
• /
• 2012

The requirement for the aerodynamic hub drag, allocated from the system requirement of development of a bearingless rotor hub, was analyzed and embodied to be substantiated by the methodology assigned from the requirement. Drag prediction for the initial hub configuration was carried out by hand calculation using aerodynamic drag coefficients and the design change about the sectional shape of torque tube was suggested to satisfy the requirement. Finally, drag prediction was performed for the changed hub configuration by using unstructured overset mesh technique and parallel computation and the calculated result satisfied the requirement of the aerodynamic hub drag. It was found that the drag of final hub configuration was also within the range of drag inferred from the trendline of developed helicopter.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.909-922
• /
• 2006

The core assets include all properties which consist of an application in Product Line Engineering. The requirement, one of the core assets, is a basis of other core assets and commonality and variability of other core assets are classified by the requirement. accordingly, commonality and variability of the domain requirement should be managed objectively and it is necessary to make a process to reuse the domain requirements. However the requirement is analyzed by domain experts or developers without proper process. In this paper, we proposed the 4 activities: (1)the domain scoping, (2)the extraction and generalization of the domain requirement, (3)the domain requirement analyzing and modeling, (4)the change management, and sub activities. For all reasons given previously, it is possible to reduce the development time and cost by reusing the architectures and components related to the domain requirement. In addition, it is possible to increase the quality of the artifacts produced based on the requirements by managing them systematically.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.498-503
• /
• 2002

Connecting with cost, schedule, and quality in a construction project, resource management is one of the essential management elements. However, the material requirement planning is built at the beginning stage of construction and needs various concerned factors, it is limited to build the resource management planning on enterprise level. The disconnected communication among managements makes impossible to control historical data. In the construction project control system, the core of management elements is to manage cost and schedule information, therefore material requirement planning should be established based on historical data about EVM which is intergating schedule and cost. In this study, a resource management system concerning material requirement planning and attribute of procurement is suggested by connecting the historical data of EVM and the material requirement planning.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.3
• /
• pp.185-191
• /
• 2005

An accurate prediction of dormancy release and bud burst in temperate zone fruit trees is indispensable for farmers to plan heating time under partially controlled environments as well as to reduce the risk of frost damage in open fields. A thermal time-based two-step phenological model that originated in Italy was applied to two important grapevine cultivars in Korea for predicting bud-burst dates. The model consists of two sequential periods: a rest period described by chilling requirement and a forcing period described by heating requirement. It requires daily maximum and minimum temperature as an input and calculates daily chill units (chill days in negative sign) until a pre-determined chilling requirement for rest release is met. After the projected rest release date, it adds daily heat units (anti-chill days in positive sign) to the chilling requirement. The date when the sum reaches zero isregarded as the bud-burst in the model. Controlled environment experiments using field sampled twigs of 'Campbell Early' and 'Kyoho' cultivars were carried out in the vineyard at the National Horticultural Research Institute (NHRI) in Suwon during 2004-2005 to derive the model parameters: threshold temperature for chilling and chilling requirement for breaking dormancy. The model adjusted with the selected parameters was applied to the 1994-2004 daily temperature data obtained from the automated weather station in the NHRI vineyard to estimate bud burst dates of two cultivars and the results were compared with the observed data. The model showed a consistently good performance in predicting the bud burst of 'Campbell Early' and 'Kyoho' cultivars with 2.6 and 2.5 days of root mean squared error, respectively.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.6
• /
• pp.271-278
• /
• 2013

The hysteretic behavior of diagonal reinforced coupling beams is excellent during earthquakes. However, construction of the diagonal reinforced coupling beams is difficult due to complex reinforcement details required by current code procedures (ACI 318-11). Due to the detail requirement, reinforcement congestion and interference among transverse reinforcement always occur during construction field. When the aspect ratio of the beam is large, the interference of reinforcement becomes more serious. The objective of this paper is to simplify the reinforcement details of slender coupling beams by reducing transverse reinforcement around the beam perimeter. For this purpose, high- performance fiber reinforced cementitious composites are used for making coupling beams. Experiments were conducted using three specimens having aspect ratio 3.5. Test results showed that HPFRCC coupling beams with half the transverse reinforcement required by ACI 318-11 provided identical seismic capacities to the corresponding coupling beams having requirement satisfying the requirement specified in ACI 318-11.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.218-226
• /
• 2023

In Korea, we still use function point based cost estimations for software size and cost of a project. The current problem is that we make difficultly calculating function points with requirements and also have less accurate. That is, it is difficult for non-experts to analyze requirements and calculate function point values with them, and even experts often derive different function points. In addition, all stakeholders strongly make the validity and accuracy of the function point values of the project before /after the development is completed. There are methods for performing function point analysis using source code [1][2][3][4] and some researchers [5][6][7] attempt empirical verification of function points about the estimated cost. There is no research on automatic cost validation with source code after the final development is completed. In this paper, we propose automatically how to calculate Function Points based on natural language requirements before development and prove FP calculation based on the final source code after development. We expect validation by comparing the function scores calculated by forward engineering and reverse engineering methods.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.22-29
• /
• 2015

Many enterprises have been adopting management systems good enough for them and operating the schemes to have competitive edge better than their competitor. One of the finest systems that most companies have been selecting is ISO 14001. ISO 14001, environment management system, is widely known as advancing internal efficiency and productivity in the various industries. As a result, the number of companies that have adopted ISO 14001's certification have been increasing continuously year by year since ISO 14000 standard was called in 1994s from ISO 18000 standard that originally used. The purpose of this study is to present that ISO 14001's requirement execution influences on management performance in the small manufacturer. In order to carry out this research, we obtained 96 survey sheets and inspected ten assumptions based on the reliability, validity of the questionnaires. The results of regression analysis are summarized as follows; First, the three factors of ISO 14001 requirement, plan, implementation and operation and management consideration, have an important effect on the operational performance. Second, the three elements of ISO 14001 requirement, environment policy, implementation and operation and management consideration, affect to the financial performance significantly. Based on the results, it is sure that the companies that execute the factors of implementation and operation and management policy have a good performance to achieve operational and financial performance so that it is important to clarify the member's role, authority and follow the procedure by a company's process. Also, the truth shows CEO's continuous will and periodical review of ISO 14001 influence on management performance as well.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.161-167
• /
• 2008

This paper describes the overview of spectrum requirement estimation recommended in ITU-R Rec. M.1390 and [IMT.METH] and its difference for the IMT mobile service, and a (IMT.METH) methodology is applied to the spectrum estimation of the recent IMT service. The traffic model and traffic calculation algorithm is briefly described for the carried traffic which is determined in terms of the offered traffic, system rapacity, and the criteria of quality of service. And the spectrum requirement demand which is required from year 2010 to year 2015 is calculated as an example for the IMT service which is recently operated and deployed in the current Korean market after obtaining the reasonable market data and the ITU market prediction data.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.8
• /
• pp.403-410
• /
• 2016

During expressway construction it has been input a lot of material, but it does not manage to estimate quantitatively. In this study, the total material requirement for construction of expressway, which separated direct material requirement and indirect material requirement each section was quantified by combining life cycle assessment (LCA) and material flow analysis (MFA). In the direct material requirement, sand 2.27E + 04 ton/km, limestone 1.02E + 04 ton/km and gravel 4.47E + 03 ton/km were required, in the indirect material requirement, gravel 2.75E + 04 ton/km, iron 9.80E + 03 ton/km and coal 9.74E + 03 ton/km were required. Material such as sand, limestone which has high direct material requirement is require of excess input prevention from construction site, and material such as iron, rare metals(chrome, nickel) and coal which has high indirect material requirement is require additional studies of resource management.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.9
• /
• pp.325-334
• /
• 2018

Requirement traceability should be continuously maintained in software development and evolution. However, it is usually updated in practice in the quality assurance phase. The gap between "is" and "should" exists due to the fact that developers must invest considerable effort to update requirement traceability while being able to obtain only marginal benefit from the updated traceability. To close this gap, we propose a spreadsheet application that enables developers to flexibly change mappings in a requirement traceability matrix. In this way, developers can reduce their effort in updating the requirement traceability matrix, but still obtain the common form of a requirement traceability matrix on a spreadsheet. The proposed application maintains the mappings between two artifacts on each sheet so that, whenever an artifact item changes, developers can instantly insert the relevant mapping changes. Then, when developers desire the common form of a requirement traceability matrix, the proposed application calculates the mappings among several artifacts and creates the matrix. The application also checks traceability errors and calculates the metrics so that developers can understand the completeness of the matrix. To understand the applicability of the proposed approach, we conducted a case study, which shows that the proposed application can be applied to the real project and easily incorporate the mapping changes.