• 대한건축학회논문집:계획계
• /
• 제35권11호
• /
• pp.117-128
• /
• 2019

The necessity of the Toi-Maru has increased greatly in order to enter to the building or to move conveniently in the building after the mid-Joseon period, when the combination of On-dol Ma-ru began to be universally used. According to this process, the 3-Dori type upper structure is thought to have undergone the typological changed by securing a more stable space of Toi-Maru In cases where a relatively large girder was used, it is often the case that the space is divided using a pillar to place a Toi-Maru on the front. However, it is difficult to find a case where the width of the Toi-Maru exceeds 1meter due to its structural limit. The type that made additional Toi-girder to overcome the spatial constraint of this structure and replaced the method of former typology after Mid-Jpseon period. In case of 5-Dori type, Toi-Maru installed in between high post and Toi post in early period. In these type, the width of Toi-Maru was subordinated by the location of milled Dori of roof structure and sometimes it became too excessive. 5-Dori type with Pyon-ju occurred to overcome these restriction between the width of Toi-Maru and the location of milled Dori of roof structure. Not a few remains of Mid-Jpseon period keeping the evidences of changing process of roof structure provoked by Toi-Maru installation. The consistent process of Toi-Maru installation and structural adjustment will be focused to consider the attempt to spatial requirement and architectural reaction in Mid-Joseon perid.

• 대한건축학회논문집:구조계
• /
• 제35권4호
• /
• pp.135-146
• /
• 2019

Deep beam has high section modules compared with shallow beam of the same weight. However, deep beam has low rotational capacity and high possibility of brittle failure so it is not possible to apply deep beams with a long span to intermediate moment frames, which should exhibit a ductility of 0.02rad of a story drift angle of steel moment frames. Accordingly, KBC and AISC limit the beam depth for intermediate and special moment frame to 750mm and 920mm respectively. The purpose of this paper is to improve the seismic performance of intermediate moment frame with 1200mm depth beam. In order to enhance vulnerability of plastic deformation capacity of deeper beam, Multi-Reduced Taper Beam(MRTB) shape that thickness of beam flange is reinforced and at the same time some part of the beam flange width is weakened are proposed. Based on concept of multiple plastic hinge, MRTB is intended to satisfy the rotation requirement for intermediate moment frame by dividing total story drift into each hinge and to prevent the collapse of the main members by inducing local buckling and fracture at the plastic hinge location far away from connection. The seismic performance of MRTB is evaluated by cyclic load test with conventional connections type WUF-W, RBS and Haunch. Some of the proposed MRTB connection satisfies connection requirements for intermediate moment frame and shows improved the seismic performance compared to conventional connections.

• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.19-28
• /
• 2018

The progressive collapse resistance performance of a steel structure constructed using the moment frame with the WUF-B connection and the composite slabs was evaluated. GSA 2003 was adapted for the evaluation. Additionally the structural robustness and the sensitivity against the progressive collapse were analyzed. In the numerical analysis, a reduced model comprised of the beam and spring elements for WUF-B connection was adapted. The composite slab was modeled using the composite-shell element. Instead of the time-consuming dynamic analysis for the effect of the sudden column removal, the equivalent energy-based static analysis was effectively applied. The analysis results showed that the structure was the most vulnerable to in the case of the internal column removal, however it satisfied the chord rotation criterion of GSA 2003 due to the contribution of the composite slab which improved the stiffness of structure. In the robustness evaluation, the structural performance showed more than 2.5 times of the requirement according to GSA 2003, and the structural sensitivity analysis indicated the decrease of 33% of the initial structural performance.

• 한국항공우주학회지
• /
• 제49권7호
• /
• pp.593-599
• /
• 2021

e-VTOL 항공기는 전기동력으로 인한 운용유지비의 절감, 친환경성, 수직이착륙으로 인한 도심운용, 자동화로 인한 조종의 편리성 등 미래 교통수단으로 향후 수요가 급증할 것으로 예상된다. 이에 전 세계적으로 활발한 연구 개발이 진행 중에 있으나 상용화를 위해서 필수적으로 요구되는 안전성 확보와 인증에 있어 기술적으로 해결해야 할 문제점들이 상존한다. 이러한 어려움으로 운송사업용 형식증명 및 표준감항증명을 받은 e-VTOL 항공기는 아직까지 전 세계적으로 없는 상태이다. 현행 항공기 감항기술기준에서 요구되는 안전도 수준은 상당히 높고 이를 입증하는 과정도 상당히 까다롭다. e-VTOL 항공기 인증도 현행 감항기술기준에서 요구하는 안전도 수준을 만족해야 하나 현행 기준의 적용성과 동등한 안전성 확보에 필요한 기술적인 한계와 문제점이 존재한다. 본 연구에서는 이러한 기술적 한계와 문제점들을 e-VTOL 항공기의 특징과 함께 제시하고자 한다.

• 한국농공학회논문집
• /
• 제64권2호
• /
• pp.85-96
• /
• 2022

The study is aimed to investigate the features and socio-economic background of farmland consolidation project with medium-sized paddy plot at irrigation associations during the Japanese colonial period in Korea. Most of farmland consolidation works in the 1940s was composed of independent irrigation and drainage ditches along the short side of field plot. However, the number of farm roads at farmland consolidation zone was much smaller than number of irrigation ditches to decrease reduction in farmland area. The standard field plot was medium-sized (about 20-40 ares) in Korea but small-sized (about 10 ares) in Japan in this period. As the result of farmland consolidation works, the unit water requirement was increased to 0.0035 m³/s/ha, and the unit area drainage discharge was over 2.0 m³/s/km² in many cases. The farmland consolidation with medium-sized plot have been spread under the colonial landlord system, where major landlords occupied a large share of farmland and managed corporate farming to gain more benefit. The reasons for spread of farmland consolidation with medium-sized plot may be as follows: high net profit ratio, an increase in land price, and labor savings in rice farming. The farmland consolidation with medium-sized plot in the colonial period showed intermediate features between the farm consolidation with small-sized plot for an increase in land productivity in Japan and the farm consolidation with medium-sized plot for an increase in labor productivity after the 1960s.

• 한국전자통신학회논문지
• /
• 제16권6호
• /
• pp.1279-1286
• /
• 2021

본 연구는 주차장 검색 및 사전예약서비스가 가능한 스마트 주차서비스에 대한 것으로, 요금(예약요금, 위약금) 등과 관련된 사용자의 선호선택 모형에 관한 연구이다. 스마트 주차서비스에 대한 응답설문을 구성하여 로짓 모형형태의 사용자 선호도 모형을 두 가지를 구축하였다. 첫 번째는 스마트주차장을 선택하는 모형으로 이용요금과 비용과의 관계에서 일반 주차장보다 선택확률이 높아지는 상황을 제시하였다. 두 번째는 주차권 예약할인 선택모형으로 예약금액과 위약금과의 관계 모형을 통하여 스마트주차서비스 선택확률을 분석하였다. 사용자의 선호도를 고려한 정교하고 다양한 형태의 스마트 주차서비스가 가능한 설계 요구사항으로 활용이 가능할 것으로 판단된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권6호
• /
• pp.2074-2093
• /
• 2022

RSA is known as one of the best techniques for securing secret information across an unsecured network. The private key which is one of private parameters is the aim for attackers. However, it is exceedingly impossible to derive this value without disclosing all unknown parameters. In fact, many methods to recover the private key were proposed, the performance of each algorithm is acceptable for the different cases. For example, Wiener's attack is extremely efficient when the private key is very small. On the other hand, Fermat's factoring can quickly break RSA when the difference between two large prime factors of the modulus is relatively small. In general, if all private parameters are not disclosed, attackers will be able to confirm that the private key is unquestionably inside the scope [3, n - 2], where n is the modulus. However, this scope has already been reduced by increasing the greatest lower bound to [d_il, n - 2], where d_il ≥ 3. The aim of this paper is to decrease the least upper bound to narrow the scope that the private key will remain within this boundary. After finishing the proposed method, the new scope of the private key can be allocated as [d_il, d_ir], where d_ir ≤ n - 2. In fact, if the private key is extremely close to the new greatest lower bound, it can be retrieved quickly by performing a brute force attack, in which d_ir is decreased until it is equal to the private key. The experimental results indicate that the proposed method is extremely effective when the difference between prime factors is close to each other and one of two following requirement holds: the first condition is that the multiplier of Euler totient function is very close to the public key's small value whereas the second condition is that the public key should be large whenever the multiplier is far enough.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3841-3848
• /
• 2022

The effect of modifiers on the optical features and radiation defying ability of the Eu³⁺ ions doped multi constituent glasses was examined. XRD has established the amorphous nature of the specimen. The presence of various functional/fundamental groups in the present glasses was analyzed through FTIR spectra. The physical, structural and elastic traits of the glasses were explored. The variation in the structural compactness of the glass structure according to the incorporated modifier was enlightened to describe their suitability for a better shielding media. For the examined glasses, the metallization criterion value varied in the range 0.613-0.692, indicating the non-metallic character of the glasses with possible nonlinear optical applications. The computed elastic moduli expose the Li-containing glass (BTLi:Eu) to be tightly packed and rigid, which is a requirement for a better shielding channel. Furthermore, the optical bandgap and the Urbach energy values are calculated based on the optical absorption spectra. The evaluated bonding parameters revealed the nature of the fabricated glasses covalent. In addition, we investigated the radiation attenuation attributes of the prepared Eu³⁺ ions doped multi constituent glasses using Phy-X software. We determined the linear attenuation coefficient (LAC) and reported the influence of the five oxides Li₂O₃, CaO, BaO, SrO, and ZnO on the LAC values. The LAC varied between 0.433 and 0.549 cm^-1 at 0.284 MeV. The 39B₂O₃-25TeO₂-15Li₂O₃-10Na₂O-10K₂O-1Eu₂O₃ glass has a much smaller LAC than the other glasses.

• 한국정보전자통신기술학회논문지
• /
• 제15권5호
• /
• pp.335-342
• /
• 2022

본 논문에서는 오디오 애플리케이션을 위한 단일 비트 3차 피드포워드 델타 시그마 변조기를 제안한다. 제안된 변조기는 저전압 및 저전력 애플리케이션을 위한 클래스-C 인버터를 기반으로 한다. 고정밀 요구 사항을 위해 레귤레이티드 캐스코드 구조의 클래스-C 인버터는 DC 이득을 증가시키고 저전압 서브쓰레스홀드 증폭기 역할을 한다. 제안된 클래스-C 인버터 기반 변조기는 180nm CMOS 공정으로 설계 및 시뮬레이션되었다. 성능 손실이 없으면서 낮은 공급 전압 호환성을 가지도록 제안된 클래스-C 인버터 기반 스위치드 커패시터 변조기는 높은 전력 효율을 달성하였다. 본 설계는 20kHz의 신호 대역폭 및 4MHz의 샘플링 주파수에서 동작시켜 93.9dB의 SNDR, 108dB의 SNR, 102dB의 SFDR 및 102dB의 DR를 달성하면서 0.8V 전원 전압에서 280μW의 전력 소비만 사용한다.

• 융합정보논문지
• /
• 제11권8호
• /
• pp.1-7
• /
• 2021

본 논문에서는 병렬 인터페이스형 디지털/아날로그 변환회로에 외부 소자를 추가해 1개 비트를 확장하는 방법을 제시했다. 이를 위해 디지털/아날로그 변환회로의 원리를 살펴보고 개별 소자를 추가해 1개 비트를 확장하는 경우에 발생되는 문제점을 분석했으며, 연산증폭기 회로를 이용한 디지털/아날로그 소자의 비트 확장 방법을 제시했다. 제시한 방법은 연산증폭기의 고정밀도 특성을 이용함에 따라 소자에 오차가 발생하더라도 출력파형의 전체적인 크기에만 영향을 미치고 각 비트 사이에서 발생하는 전압역전 현상은 발생하지 않는 특징을 지닌다. 제시한 방법의 효과를 확인하기 위해 실험회로를 구성해 출력의 절대전압 측정과 상대적 오차 측정을 실시한 결과 0.0756%의 전압오차가 나타남으로서 개별소자 추가에 의해 1개 비트 확장 시 요건인 0.195%를 충분히 충족함을 확인했다.