• 한국의류산업학회지
• /
• 제24권2호
• /
• pp.173-182
• /
• 2022

As consumption pattern and fashion communication become digitalized, fashion houses are being inherited by creative directors owing to their expanding role. While the roles and responsibilities of creative directors have been changing extensively along with the dynamic nature of the fashion industry, researches on creative directions have mostly focused on luxury brands. This study examined the creative direction of John Galliano for Maison Margiela, a conceptual brand to be maintained by a creative director. To analyze this, the authors established a creative direction analysis model constituting five elements: brand heritage, trend, democratization, brand status, and persona, drawing on the luxury brand architecture by Kapferer and Bastien. Thus, Galliano has maintained anonymity as a heritage of Maison Margiela, expanding the existing Replica lines, and introduced fashion shows focusing on current issues or social phenomena. As a democratization strategy, he directed the brand to associate with more popular brands or expanded diffusion lines to secure broader customer base, while demonstrating couturier-like showmanship in the media and establishing his own persona. His direction for Maison Margiela recreates and expands brand heritage by transforming the brand philosophy. Therefore the new creative direction communicates with the wider public and diversifies customer bases through democratization strategies, while building Galliano's own persona.

• 대한치과보철학회지
• /
• 제36권4호
• /
• pp.615-643
• /
• 1998

The purpose of this study was to evaluate the effect of cantilever length, load, and implant number on the stress distribution of implant supported fixed prosthesis. In the replica of an edentulous human mandible, four or five implants were placed and spaced evenly between the mental foramina and symmetrical gold alloy cast superstructures with cantilever were fabricated. Strain gauges were placed in buccal and lingual side of implants. 9, 15, 21kg of loads at varying cantilever lengths were applied to the occlusal surface of fixed prostheses. The strains were recorded from each gauge and principal stresses were calculated The results were as follows : 1. Increasing the length of the cantilever increased the stresses on the bone supporting implants. and the ratio of increase became high as increasing the load. 2. In the model with four implants, the highest compressive stress was measured on lingual side of the first implants nearest loading point and the highest tensile stress was measured on buccal side of the second implants. 3. In the model with five implants, the highest compressive stress was measured on lingual side of the first implants nearest loading point. And the highest tensile stress was measured on buccal side of the second implants, and lingual side of the third implants. 4. There was no significant change of the magnitude of stress on the most distal imp]ant of non cantilevered side as increasing the cantilever length or load. 5. In general, the superstructure supported by five implants reduced the stress and was less affected by cantilever length compared to the support provided by four implants.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.673-678
• /
• 2005

ACI 318(1999) 규준에서는 모멘트골조를 특수모멘트골조, 중간모멘트골조, 보통모멘트골조의 3가지로 구분하고 있다. 이중 중 약 지진 지역에서는 대부분의 구조물이 보통모멘트골조로 설계되고 있다. 이러한 보통모멘트골조는 현행 규준에서 가장 엄격하지 않은 상세와 요구사항이 적용되는 골조 형식이다 본 연구는 중력하중으로만 설계되고 ACI 318(1999) 기준의 보통모멘트골조의 상세만을 가지는 3층의 사무소 건물의 내진 성능 평가를 그 목표로 한다 실험적 연구를 위하여 1/3 축소 모델을 제작하여 준정적 실험을 실시하였다. 보통모멘트골조의 전체적인 거동은 갑작스러운 강도의 저감 없이 안정적인 거동을 하였다 실험결과, 중력하중으로만 설계된 3층의 사무소건물은 UBC 1997 규준의 지진 지역 1, 2A, 2B에서의 요구하는 설계 밑면전단력보다 더 큰 횡력 저항 능력을 가지고 있는 것으로 나타났다.

• The Journal of Advanced Prosthodontics
• /
• 제9권6호
• /
• pp.463-469
• /
• 2017

PURPOSE. To evaluate the fit of a three-unit metal framework of fixed dental prostheses made by subtractive and additive manufacturing. MATERIALS AND METHODS. One master model of metal was fabricated. Twenty silicone impressions were made on the master die, working die of 10 poured with Type 4 stone, and working die of 10 made of scannable stone. Ten three-unit wax frameworks were fabricated by wax-up from Type IV working die. Stereolithography files of 10 three-unit frameworks were obtained using a model scanner and three-dimensional design software on a scannable working die. The three-unit wax framework was fabricated using subtractive manufacturing (SM) by applying the prepared stereolithography file, and the resin framework was fabricated by additive manufacturing (AM); both used metal alloy castings for metal frameworks. Marginal and internal gap were measured using silicone replica technique and digital microscope. Measurement data were analyzed by Kruskal-Wallis H test and Mann-Whitney U-test (${\alpha}=.05$). RESULTS. The lowest and highest gaps between premolar and molar margins were in the SM group and the AM group, respectively. There was a statistically significant difference in the marginal gap among the 3 groups (P<.001). In the marginal area where pontic was present, the largest gap was $149.39{\pm}42.30{\mu}m$ in the AM group, and the lowest gap was $24.40{\pm}11.92{\mu}m$ in the SM group. CONCLUSION. Three-unit metal frameworks made by subtractive manufacturing are clinically applicable. However, additive manufacturing requires more research to be applied clinically.

• 한국의류산업학회지
• /
• 제18권4호
• /
• pp.457-467
• /
• 2016

This study aimed to develop functional underwear for elderly women in their sixties in terms of good fit, wear comfort and body temperature regulation. To satisfy elderly women's physical and metabolical needs, an automatic temperature control system via PCM treatment was applied. Underwear pattern was produced by producing body surface replica, which was derived from 3D body parametric model. Differential ratios of outline length and area between 3D surface and 2D plane were 1.4% and 0.5%, respectively. The reduction rate was determined as 10% through the expert's evaluation. PCM treated fabric showed higher Q-max, meaning that it can facilitate the thermal transition in hot situation. Moreover, it also showed higher insulation to preserve heat and keep warm microclimate in a cold weather. Heat distribution measurements on various body parts revealed that the temperature after PCM treatment was significantly higher. The clothing pressure after 10% pattern reduction showed higher before reduction, at the same time, even lower than the comfort clothing pressure range of $5{\sim}10gf/cm^2$, implying that experimental garment of this research is acceptable in terms of clothing pressure. Evaluation results on the comfort to move in various motions proved that adequate clothing pressure improved the wear comfort in various motions.

• 한국정보과학회논문지:정보통신
• /
• 제32권6호
• /
• pp.705-715
• /
• 2005

P2P(peer-to-peer) 웹 캐슁 모델은 서버 쪽에 집중되는 트래픽을 완화시킴으로써 전통적인 웹 캐슁 모델을 보완할 수 있다는 측면에서 최근에 활발히 연구되어 왔다. P2P 웹 캐슁은 클라이언트들의 로컬 캐쉬를 활용하여 부가적인 인프라의 추가없이 캐쉬 공간이 확대되는 효과를 얻을 수 있지만, 각 클라이언트들은 독립된 피어로서의 자율성(autonomy)을 가지므로 이러한 자율성의 제한을 최소화해야한다. 본 논문에서는 피어의 자율적인 동적 참여와 로컬 캐슁 전략을 보장하여 시스템의 실행 가능성(feasibility)을 높인 환경에서 효율적인 디렉토리 기반 P2P 웹 캐슁 시스템을 제안하였다 제안하는 P2P 웹 캐슁 시스템은 동적인 P2P 네트워크 상에서의 오브젝트의 lifetime을 예상하여 이를 이웃 선택(neighbor selection)과 저장 공간 관리(storage management)에 적용하였다. 시스템의 성능 평가를 위하여 클라이언트의 http 요청 로그 데이터셋을 이용하여 트레이스 기반(trace-driven) 시뮬레이션을 수행하였다. 시뮬레이션 결과를 통하여 제안하는 시스템이 기존의 시스템에 비하여 주어진 동일한 환경에서 더 높은 정확성과 더 적은 리디렉션 실패(redirection failure)를 가짐을 확인하였다.

• 대한치과기공학회지
• /
• 제39권1호
• /
• pp.35-42
• /
• 2017

Purpose: The purpose of this paper was to evaluate the occurrence of errors regarding adaptation by conducting a three-dimensional assessment comparing the bridge type dental restoration after the cutting process, which has multiple abutments, with a single type dental restoration. Methods: By using ten identical files obtained by scanning the master model, thirty designs were created consisting of ten maxillary right first premolars and ten maxillary right first molars with single crown abutments, along with ten bridge designs with the identical abutment. A 5-axis milling machine was used to produce the design file. The produced denture prostheses were scanned using a silicone replica for a STL file. An evaluation was conducted using 3D analysis software on the master model and each of the thirty data files. Results: The RMS value of the pre-molar (14) was $38.4{\pm}4{\mu}m$ for single and $54.7{\pm}6{\mu}m$ for bridge abutment; therefore, a statistically significant difference was observed for single and bridge designs although both shared the same abutment form (P<.05). Also, the RMS value of the molar (16) was $47.6{\pm}2{\mu}m$ and $56.6{\pm}5{\mu}m$ for the single and bridge designs, respectively, thereby presenting a statistically significant difference (P<.05). Conclusion: As a result, dental prosthesis fabricated using the single method presented better internal adaptation outcomes.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2000년도 추계학술대회 논문집
• /
• pp.61-66
• /
• 2000

전력연구원에서 개량중인 한국원자력교육원 제 2호기 (KNPEC#2) 시뮬레이터의 검증을 위해 출력 연속변화 등 시나리오를 선정하여, 이에 대한 기준 데이터를 최적평가용 전산코드인 RETRAN과 MARS를 이용하여 생산하였다. 선정된 시나리오를 정확히 모사하기 위해 KNPEC#2 시뮬레이터의 대상호기인 영광 1,2호기 노심냉각계통 및 증기 계통을 상세 분할하였으며, 주요 기기 및 제어 계통을 모델링하였다. 모델링을 위해서 발전소 실제 운전자료를 활용하였으며, 필요시 설계자료와 유사호기인 고리 3,4호기 자료를 참고하였다. 끝으로 정상상태 및 비정상상태 운전조건과의 비교를 통해 모델링의 타당성을 확인한 후 각 시나리오에 따른 데이터를 생성하였다.

• 대한치과기공학회지
• /
• 제40권4호
• /
• pp.201-207
• /
• 2018

Purpose: The purpose of this study is to evaluate the fitness of lower jaw compete denture with glass fiber. Methods: Lower jaw edentulous model was selected as the master model. Ten study models were produced using Type IV stone(n=10). Lower jaw trial dentures were produced by the wax denture base and artificial teeth. Conventional complete denture (CD) group was fabricated by excluding glass fiber reinforcement (n=5). Glass fiber complete denture (GD) group was fabricated with glass fiber reinforcement (n=5). The lower jaw trial complete denture was invested using a plaster. PMMA resin was injected and curing was performed. The CD and GD groups measured the fit using silicone replica technology. The measured data was verified by t-test. Results: The anterior area of the CD group showed the smallest value. There was a statistically significant difference in the anterior area of the CD group and the GD group (p<0.05), but there was no statistically significant difference in the posterior area (p>0.05). Conclusion : Complete denture with glass fiber showed low fitness and further study is needed to apply it clinically.

• 대한예방한의학회지
• /
• 제19권1호
• /
• pp.109-116
• /
• 2015

Objective : Solar ultraviolet (UV) light can cause photoaging of human skin. Many researchers have focused on effective prevention to mitigate the aging process. This study was aimed to investigate anti-wrinkle effects of pomegranate concentration solution (PCS) using photoaged hairless mouse model. Method : To clarify the protective effect of PCS against UVB-induced photo-damage, water capacity was measured with transepidermal water loss (TEWL) in SKH-1 hairless mice. In addition, image of skin replicas was analyzed. Results : Our results showed that the PCS treatment protects skin against UVB-induced photoaging, based on the parameters including moisture capacity and TEWL. According to visual assessment of skin replica, application of 1 ml/kg PCS inhibited UV-induced wrinkle formation in mice skin as compared to the vehicle-applied control mice. Conclusion : Taken together, these results indicated that PCS could improve skin wrinkle formation induced by UVB irradiation in SHK-1 hairless mice. PCS could be applied as an anti-wrinkle agent.