• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.8-15
• /
• 2018

Waste concrete accounts for the largest portion of construction waste, and the supply of natural aggregate is unstable. Therefore, importance of using recycled aggregate is emphasized. The purpose of this study is to investigate the mechanical properties of high strength concrete according to the replacement rate of recycled coarse aggregate. For this purpose, the target design compressive strength was set to 40MPa, and the substitution rates of the recycled coarse aggregate were set to 0%, 30%, 60%, and 100%, respectively. Through experiments on the unreinforced concrete and hardened concrete, The validity of the use was confirmed. In addition, LCA method was used to evaluate the environmental impact of recycled aggregates and to compare and analyze the environmental impacts of the aggregates.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.341-358
• /
• 2003

This paper proposed a general formulation of Life-Cycle Cost (LCC) models and LCC effective design system models of steel bridges suitable for practical implementation. An LCC model for the optimum design of steel bridges included initial cost and direct/indirect rehabilitation costs of a steel bridge as well as repair/replacement costs, loss of contents or fatality and injury losses, road user costs, and indirect socioeconomic losses. The new road user cost model and regional socioeconomic losses model were especially considered because of the traffic network. Illustrative design examples of an actual steel box girder and an orthotropic steel deck bridge were discussed to demonstrate the LCC effectiveness of the design of steel bridges. Based on the results of the numerical investigation, the LCC-effective optimum design of steel bridges based on the proposed LCC model was found to lead to a more rational, economical, and safer design compared with the initial cost-optimum design and the conventional code-based design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.311-316
• /
• 2020

The main cause of DMSMS is the rapid replacement cycle and short life cycle of parts, according to the development of science, compared to the long life cycle of weapons systems. In particular, the problem of the supply and demand of such parts becomes even more acute during the operation maintenance phase after the mass production and power generation stage. To eliminate DMSMS problems that arise continuously from development to the operation of weapon systems and select the most cost-effective countermeasures to obsolescence, this paper suggests a standard to determine the appropriate time for quantitative performance improvement by conducting total life cycle cost analysis. For such purpose, this study examined the domestic and overseas cost analysis methods and applied it to single domestic weapon system to verify the research. This study responds to the issue of discontinuing components and helps reduce the total life cycle cost of military products.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.66-73
• /
• 2022

In order to induce users to purchase excellent products in the water industry that satisfy the technical standards of excellent products, in this study, it is to present the advantages of the cost aspect of the pumps as the objective basis. It will be to promote technology development of domestic water companies and to create a virtuous cycle structure in the water industry. In order to present an objective basis for the merits in terms of cost, an economic evaluation was conducted through life cycle cost analysis. For the LCC analysis, initial cost (pump cost and installation cost), operation cost (energy cost and maintenance cost) and demolition cost (disposal cost and residual value) are searched and calculated. As the results of comparison on two capacity of pumps, the energy cost of the excellent pump is 212 million KRW lower than the that of general pump in the large pump. The cost of excellent pump was 17 million KRW lower than that of general pump in small capacity pump. As the results of sensibility test, if the product is developed in the direction of improving pump efficiency and increasing the replacement cycle of consumables, it is predicted that the effect on LCC will be large.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.2
• /
• pp.31-38
• /
• 2016

In a construction project, the portion for maintenance costs for a building is considerable compared to the initial construction cost. As such, Life Cycle Cost (LCC) analysis is being increasingly utilized to assess the design value of engineering work in Korea. Additionally, the Public Procurement Service in Korea announced that it will be mandatory for all domestic construction projects to adopt BIM. Furthermore, the paradigm for architectural design has shifted from 2D to 3D, and to BIM, which includes a data management system. Within this background, however, there is currently no adequate BIM-based LCC analysis software and the requirements of cost estimation for repair and replacement cost for a building is not completely adequate in BIM tools such as Revit and Archicad. Therefore, this study suggests a process of cost estimation for repair and replacement (R&R) cost based on IFC data. First, we analyzed existing R&R criteria and defined BIM-based requirements when calculating R&R costs. These requirements were extracted from relevant IFC data. Subsequently, this was saved to a database and a BIM-based database was built for R&R cost estimation. Finally, this database was connected with external databases such as R&R Criteria DB and Cost Information DB to calculate R&R costs. This process is expected to improve upon the traditional process of cost estimation of R&R cost by applying a BIM model. The proposed process can contribute to a further standardizing of BIM-based LCC analysis thru application to initial construction costs, energy costs, and other maintenance costs.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.101-103
• /
• 1998

뉴스기사를 구성하는 NOD데이터는 VOD(Video on Demand) 데이터와는 달리 미디어의 종류 및 크기, 시간적인 접근 지역성, 사용자와 상호 작용성 등의 차이점을 가질 뿐만 아니라 새로운 뉴스기사가 수시로 생성되고 사용자가 인기도가 높은 기사와 최신의 뉴스기사에 더 많이 접근하는 특성을 가진다. 본 논문에서는 현재 서비스중인 전자신문의 로그파일을 분석하여 NOD 뉴스기사의 인기도가 Zipf분포와 다름을 보이고, 뉴스기사의 생명주기Lifr Cycle)에 따른 접근 확률분포 제시한다. NOD 데이터의 접근 편기성으로 인하여 데이터 캐싱을 통한 NOD 서버의 성능 향상을 기대할 수 있으나 뉴스기사의 생명주기가 짧고 접근시간대별로 사용자 접근형태가 변하는 등의 이유로 단순히 인기도만 고려한 캐싱은 빈번한 데이터 재배치 문제로 인해 높은 캐시 관리비용을 야기한다. 따라서 본 논문에서는 뉴스 기사의 접근 편기성에 나타나는 인기도(popularity)와 생명주기를 조합한 척도를 제안하고 이를 이용한 재배치를 제안한다.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2015-2020
• /
• 2011

Key set the current non-urban rail power failure of equipment to operate the railway will generate a lot of problems. I know in advance the ideal of power equipment to prevent the failure to derive an efficient replacement cycle for the power equipment monitoring and diagnosis of the condition can become necessary to develop a system. In order to determine the status of the power plant during operation and behavior of the partial discharge current state data, regular monitoring and inspection requirements also stamp the basic current, voltage, temperature and humidity should be identified.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1478-1485
• /
• 2011

Subway stations have a characteristic that the facilities in the ceiling should be checked, replaced or expanded frequently. The frequent opening and closing of ceiling panels result in the damage of panels which makes them easily disengaged. In order to resolve this issue, which is giving difficulty in the maintenance of the stations, this study suggest a sliding ceiling panel structure which can be opened and closed with sliding mechanism, instead of current fixed type ceiling panels. The sliding ceiling panel will prevent the damage of ceiling panels due to frequent disengagement and engagement. It will increase the durability of ceiling panel and extend the cycle of panel replacement. Accordingly, the maintenance cost will be also reduced.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.46-55
• /
• 2015

There is a limit for deforestation in order to keep the environmental cycle undisturbed. The heart of the paper is to replace the wood to a maximum extent to obtain a sustainable environment. This research aims at new natural composites in which treated hemp fiber used as reinforcement, synthetic cellulose used as particulate to improve the adhesion between matrix - fiber interface and Epoxy LY556 acted as matrix fabricated by hand layup technique. The density, water absorption, tensile properties, impact strength, hardness, flexural properties and compressive properties have been evaluated under ASTM standards and compare the results with existing materials such as wood, aluminium, etc., The composite hemp fiber reinforced polymer (HFRP) could be exploited as an effective replacement for wood and it would be suitable for automotive applications by comparing results.

• Agribusiness and Information Management
• /
• v.9 no.1
• /
• pp.18-22
• /
• 2017

It takes lots of time and labor if a worker have to measure the water quality at a certain but designated time every day in an un-automated aqua farm. In addition, if the equipment is soaked in the sea water consistently, it will be contaminated by diverse floating matters and barnacles, and it often becomes mal-functional within 2~3 months. Therefore, we need to develop a system with which the sensed data could be checked in real time and operated automatically, while preventing the contamination of the sensor, a crucial component for water quality measuring equipment, as much as possible, and increasing the replacement cycle. We have developed a non-cleaning water quality measuring equipment and its software which are used in the fishery household of offshore aqua farms. By providing the workers with a mobile application which has a function of monitoring the water quality in real time, they can check the situation directly without going to the fishery household.