• International Journal of Advanced Culture Technology
• /
• 제7권4호
• /
• pp.40-48
• /
• 2019

Indoor gardens tailored to suit individual tastes offer a place to enjoy plants and to relax to city dwellers to relieve stress from city life. However, there are technical issues to build such indoor gardens. To offer solutions to technical issues, this study aims to analyze development phases of indoor garden-related technologies by studying available patents in detail. Also, the study aims to understand current status and future direction of technologies by examining technological trends for introduction of indoor gardens. Brainstorming method was used to understand technology trends and as a result, two groups were identified for technical features of indoor gardens: indoor greening technology and rest area for users. An analysis on selected patents showed that the number of patents increased until 2010 and declined gradually afterwards. Korea ranked the highest in the number of patents grant followed by USA, Japan and Europe. Similar order was observed with the number of patents granted by nationality of applicants. The number of patents granted by nationality was the highest for Korean nationals. For indoor greening technologies, patents related to structure from 2007 were mostly concentrated in the areas of irrigation control and environment control for plants and vegetation. For rest area related technologies, patent related to structure showed a repetitive pattern of increasing and decreasing, but overall, on downtrend. For further development and dissemination of indoor gardening technology, more R&D work is needed with focus on environmental control technology for designing suitable environment for both human and plant.

• 한국BIM학회 논문집
• /
• 제9권3호
• /
• pp.8-18
• /
• 2019

Precast concrete manufacturing has proved economies of scale through the repetitive production by means of standardization, automation, and prefabrication. Advanced digital design and fabrication technologies can empower its benefits by enabling mass customization in the building design and construction. This study analyzed five case studies in terms of 1) design intent and background, 2) module development and facade construction, 3) integrated process among project stakeholder. This article has attempted to establish the following three points in conclusion: 1) Form generating digital design tools such as Rhino, CATIA, Generative Component, and Digital Project were implemented to produce parametric surface pattern and rationalization to maximize existing precast manufacturing benefits. Also, BIM program has been used to promote coordination and communication among engineering consultants and contractors, 2) In addition to traditional precast concrete materials, GFRC, RFP, brick cladding precast and 3D printed mould have been introduced to reduce the weight and cost and to comply the code from the zoning, seismic, and fireproof requirements, 3) Design-assist contract, design-assist financial support, and co-location measures have been introduced to facilitate collaboration between architect, fabricator, and contractor from the beginning of the project.

• 한국의류학회지
• /
• 제44권5호
• /
• pp.950-968
• /
• 2020

This study derives the modern characteristics of the paisley ornament through an analysis of the paisley ornament shown in fashion since the 2010s based on a theoretical review of the paisley ornament used in Kashmir India shawls for artistic inspiration in the fashion-textile field. It classified the paisley ornament in fashion since the 2010s into types of 'basic structure of body and coif', 'abnormal paisley ornament shapes', 'complex structure of paisley ornament', 'complex structure with other motif', 'a pair of symmetrical reflection motif', 'regular of repetitive arrangement', 'complex arrangement of irregularity and regularity' and 'free arrangement of irregularity'. A comparative analysis with the historical paisley ornament shows that paisley ornaments have contemporary characteristics like 'Bisector structure of centerline in criterion of the body', 'Composite structure of extended 1-repeat', and 'Free structure of engineered placement'. A modern design was inspired by the historical art forms; however, it was used in free utilization of motifs and patterns in terms of size, direction, proportion and space. These were the expression of a design identity that originated from the aesthetic ability and career of a designer as well as the technology of computer programs for the improvements in time and cost efficiency.

• Earthquakes and Structures
• /
• 제23권1호
• /
• pp.13-21
• /
• 2022

Masonry constructions exhibit uncertain behaviors under dynamic effects such as seismic action. Complex issues arise in the idealization of structural systems of buildings having different material types and mechanical properties. In this study, the structural behavior of a vaulted masonry building constructed using full clay brick and lime-based mortar and sitting on consecutive arches was investigated by experimental and numerical approaches. The dimensions of the structure built in the laboratory were 391 × 196 cm, and its height was 234 cm. An incremental repetitive loading was applied to the prototype construction model. Along the gradually increasing loading pattern, the load-displacement curves of the masonry structure were obtained with the assistance of eight linear displacement transducers. In addition, crack formation areas, and relevant causes of its formation were determined. The experimental model was idealized using the finite element method, and numerical analyses were performed for the area considered as linear being under similar loading effect. From the linear analyses, the displacement values and stress distribution of the numerical model were obtained. In addition, the effects of tie members, frequently being used in the supports of curved load-bearing elements, on the structural behavior were examined. Consequently, the experimental and numerical analysis results were comparatively evaluated.

• 동양고전연구
• /
• 제37호
• /
• pp.279-306
• /
• 2009

본고의 목적은 한글 간찰을 대상으로 상투적인 표현을 고찰하는 데 있다. 한글 간찰의 상투적인 표현은 한글 간찰의 격식(格式)의 완성과 더불어 16세기에서 17세기에 이르는 과정에서 그 기틀이 마련되었다. 한글 간찰의 상투적 표현은 서두(書頭) 부분과 결말(結末) 부분에서 중점적으로 쓰였다. 서두에서는 호칭(呼稱)과 안부인사(安否人事)에서, 결말(結末)에서는 결말인사(結末人事)와 결귀(結句)에서 많이 쓰인 것을 알 수 있었다. 호칭 상투적 표현은 16세기의 <순천김씨언간>이나 17세기의 <현풍곽씨언간>에서는 서두의 자리에 고유어 중심의 상투적인 표현이 쓰였으며, 19세기의 <징보언간독>에서는 서두의 자리에 한자어 중심의 상투적 표현이 쓰였다는 점이 달랐다. 안부 인사의 상투적 표현에서는 답상(答狀)의 경우 '유무 보고' 같은 상투적 표현이 덧들어간다는 점에서 기상(寄狀)의 표현과 달랐다. 16세기의 <순언>에서 상투적 표현으로 점차 자리 잡아 가는 과정을 포착할 수 있었고, 17세기의 <현언>에서는 고유어 중심의 상투적인 표현이 하나의 정형(定型)을 이루게 된 것을 알 수 있었다. 다만 19세기의 <징언>에서는 <현언>의 고유어 중심의 상투적 표현이 오히려 한자어 중심의 상투적 표현으로 대체된다는 점이 특이하였다. 결말 인사와 결구 표현도 안부 인사 표현과 같은 양상을 보이고 있음을 알 수 있었다. <순언>보다 <현언>의 결말 인사와 결구 표현이 훨씬 단순화되어 반복적으로 쓰임으로써 상투성을 확보하는 것을 파악할 수 있었으며 아울러 <징언>에서는 오히려 한자어 중심의 번역체로 바뀌고 있음을 알 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제19권4호
• /
• pp.393-401
• /
• 1998

임상학적인 관찰에 따르면, 반복적인 하중에 의하여 뼈/건의 접합부분에 발생하는 부분적인 파손은 병리학적인 변화를 유발시킴으로 인하여 주관절의 상골과염(Epicondylitis)으로 발전시킬 수 있는 주요한 원인으로 간주되고 있다. 반복적인 하중이나 정적인 하중 하에서의 주관절에 위치한 신전건 및 굴곡건의 기계학적인 물성치와 파괴양상은 지금까지 잘 알려져 있지 않다. 본 연구에서는 상골과염과 직접적인 관계가 되는 신전건 및 굴곡건의 기계학적인 물성치인 파괴강도, 반복하중의 회수와 변형율(Strain)간의 연관관계 및 반복하중에 있어서의 생체조직학적 변화의 향상, 특히 파괴의 진행양상을 관찰하였다. 적용하중의 속도에 따르는 신전건 및 굴곡건의 파괴강도의 통계학적인 차이는 보이지 않고 있으나, 파괴강도에 있어서 신전건은 1199.0 N/$cm^2{\pm}$388.8, 굴곡건 1922.0 N/$cm^2{\pm}$764.4로, 굴곡건이 신전건에 비하여 1.6배 정도 크게 나타났으며, 상호간의 파괴강도에 있어서 통계학적인 차이가 있음을 보여주고 있다.(p<0.05). 조직학적 관찰에 의하면, 반복하중 하에서 뼈/건의 접합부분 특히 Uncalcified Fibrocartilage 부분에서 분리가 시작되었으며, 이는 상골과염을 발생시키는 주요생체조직부분이라는 것을 시사하고 있다.

• 생명과학회지
• /
• 제14권3호
• /
• pp.521-524
• /
• 2004

본 연구는 short oligonucleotide primer를 이용하여 마 품종간 유전 분석을 실시 하고자 PCR증폭 기법을 확립하고, 확립된 기술을 이용하여 제주도에 사육중인 천념기념물 347호로 등록된 제주말과 경주마로 잘 알려진 더러브렛간의 유전적인 다양성을 분석한 결과 마 품종간 차이를 보이는 DNA marker는 9개의 primer에서 확인되었으며, 이중 6개의 primer에서 더러브렛 특이 밴드와 나머지 3개에서 제주 마 특이 RAPD 밴드가 확인되어 cloning과 sequencing후에 SCAR primer를 제작하여 마 품종 식별에 활용할 수 있을 것으로 사료되며, 본 연구결과 RAPD표지인자는 마 품종간의 유전 분석에 매우 유용한 것으로 판단되었다.

• 한국환경보건학회지
• /
• 제34권2호
• /
• pp.137-147
• /
• 2008

This study evaluated the effects of the human activity and outdoor air on concentrations of size-selective particulate matters (PM) by conducting a realtime measurement in classrooms and on roofs at 4 elementary schools, 3 middle schools and 3 high schools in Incheon City. PM concentrations featured repetitive pattern of increasing during break time (including lunch hours) and cleaning time while decreasing during class hours. This trend was more prominent with inhalable PM and PM10 than fine PMs (PM2.5, PM1.0). The indoor/outdoor (I/O) ratio of inhalable PM and PM10 exceeded 1 while that of fine PMs was close to or below 1. The PM2.5 (out)/PM10 (out) ratio stood at 0.59 (${\pm}0.16$) and the PM2.5 (in)/PM10 (in) ratio was 0.29 (${\pm}0.09$), suggesting that occupant activity had a greater effect upon coarse particles (PM10-PM2.5) than upon fine particles (PM2.5, PM1.0). The correlations between the indoor and the outdoor PM concentrations showed a stronger positive correlation for fine particles than that of coarse particles. The linear regression analysis of PM concentrations indoor and outdoor indicated a higher determinant coefficient ($r^2>0.9$), and consistency for fine particles than in case of coarse particles. In conclusion, the results of this study suggest that the indoor coarse particle concentration is more attributed to occupant activity and the indoor fine particle concentration is more influenced by outdoor air pollution.

• 대한치과마취과학회지
• /
• 제5권1호
• /
• pp.15-21
• /
• 2005

Autism is characterized with an abnormality of reciprocal social relatedness and of communication development. Also, autistic children show repetitive and stereotypical behavior pattern and deficiency of endurance against change. Dental problems related to autism are self-injury and trauma from accidents. Sometimes self-injury is due to discomfort resulting from restoration and local anesthesia. Also, gingivitis and multiple caries are common because of poor oral hygiene. Autistic children are anxious about visual and auditory stimuli because they don't understand the dental procedure. If the face of any changes in their daily life, their behavior becomes uncontrollable. In a setting such as the outpatient office, an autistic child's uncontrollable behavior makes it difficult to carry out proper treatment. If they need treatment under general anesthesia, it is very difficult to manage them in a ward as they are severly anxious about being admitted to a hospital. Therefore it is necessary to treat these children according to a specific management program under general anesthesia in an outpatient office. This case study reports of a 14 year old autistic teenager who although became uncontrollable because of the pain from multiple caries and from anxiety of the dental treatment eventually received treatment under general anesthesia and under conscious sedation in an outpatient office.

• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.147-154
• /
• 2007

This paper describes a 'gyro-mouse', which provides a new human-computer interface (HCI) for persons who are disabled in their upper extremities, for handling the mouse-click and mouse-move function. We adopted the artificial neural network to recognize a quick-nodding pattern of the disabled person as the gyro-mouse click. The performance of our gyro-mouse was evaluated by three indices that include 'click recognition rate', 'error in cursor position control', and 'click rate per minute' on a target box appearing at random positions. Although it turned out that the average error in cursor positioning control was 1.4-1.5 times larger than that of optical mouse control, and the average click rate per minute was 40% of the optical mouse, the overall click recognition rate was 93%. Moreover, the click rate per minute increased from 35.2% to 44% with repetitive trials. Hence, our suggested gyro-mouse system can be used to provide a new user interface tool especially for those persons who do not have full use of their upper extremities.