• 제목/요약/키워드: repetitive pattern

검색결과 122건 처리시간 0.028초

Reproducibility of Electromyography Signal Amplitude during Repetitive Dynamic Contraction

  • Mo, Seung-Min;Kwag, Jong-Seon;Jung, Myung-Chul
    • 대한인간공학회지
    • /
    • 제30권6호
    • /
    • pp.689-694
    • /
    • 2011
  • Objective: The aim of this study is to evaluate the fluctuation of signal amplitude during repetitive dynamic contraction based on surface electromyography(EMG). Background: The most previous studies were considered isometric muscle contraction and they were difference to smoothing window length by moving average filter. In practical, the human movement is dynamic state. Dynamic EMG signal which indicated as the nonstationary pattern should be analyzed differently compared with the static EMG signal. Method: Ten male subjects participated in this experiment, and EMG signal was recorded by biceps brachii, anterior/posterior deltoid, and upper/lower trapezius muscles. The subject was performed to repetitive right horizontal lifting task during ten cycles. This study was considered three independent variables(muscle, amplitude processing technique, and smoothing window length) as the within-subject experimental design. This study was estimated muscular activation by means of the linear envelope technique(LE). The dependent variable was set coefficient of variation(CV) of LE for each cycle. Results: The ANOVA results showed that the main and interaction effects between the amplitude processing technique and smoothing window length were significant difference. The CV value of peak LE was higher than mean LE. According to increase the smoothing window length, this study shows that the CV trend of peak LE was decreased. However, the CV of mean LE was analyzed constant fluctuation trend regardless of the smoothing window length. Conclusion: Based on these results, we expected that using the mean LE and 300ms window length increased reproducibility and signal noise ratio during repetitive dynamic muscle contraction. Application: These results can be used to provide fundamental information for repetitive dynamic EMG signal processing.

초등과학영재와 일반학생의 과학적 의문 생성 패턴 분석 (An Analysis of the Patterns of Scientific Questions Generation among Elementary Science-Gifted and General Students)

  • 엄주경;이길재
    • 한국과학교육학회지
    • /
    • 제35권4호
    • /
    • pp.537-548
    • /
    • 2015
  • 이 연구의 목적은 초등과학영재와 일반학생이 관찰 상황에서 나타내는 과학적 의문 생성 패턴을 분석하는 것이다. 이 연구에서 과학적 의문 생성 패턴(pattern in generating scientific questions)이란 과학적 의문의 유형(Type of scientific questions)과는 구분되는 것으로, 학생들이 탐구 과정 중 여러 유형의 의문들을 생성해가는 방식을 의미한다. 연구에 적합한 관찰 과제로 사이다 속 건포도, 촛불, 염색된 샐러리 과제를 선정하였다. 그리고 연구의 대상은 전라남도 S시 영재교육원 6학년 과학영재 26명과 같은 지역 시내에 위치한 초등학교 6학년 일반학생 27명으로 하였다. 연구 결과는 다음과 같다. 첫째, 초등과학영재와 일반학생이 관찰 상황에서 나타낸 과학적 의문 생성 패턴은 '[패턴 1] 한 가지 유형의 의문 생성', '[패턴 2] 서로 다른 유형의 의문을 차례로 생성', '[패턴 3] 서로 다른 유형의 의문을 반복하여 생성', '[패턴 4] 서로 다른 유형의 의문을 순환하여 생성', '[패턴 5] 서로 다른 유형의 의문을 반복 순환하여 생성'의 다섯 가지로 분류할 수 있었다. 둘째, 초등과학영재와 일반학생은 각각 다섯 가지 패턴을 모두 나타냈으나 그 빈도에는 차이가 있었다. 영재학생들은 [패턴 3]과 [패턴 5]를 주로 나타냈으나, 일반학생들은 [패턴 1], [패턴 2], [패턴 3]을 가장 많이 나타냈다. 이러한 연구 결과는 학생들이 탐구 과정 중 생성한 개별 의문의 유형과 더불어 각 유형의 의문들을 생성해나가는 방식 또한 매우 중요함을 시사한다. 이를 통해 교사들은 학습자의 특성에 알맞은 과학적 의문 교수 학습 전략을 수립할 수 있을 것이다.

디자인 호텔에 나타난 실내디자인 표현특성 - 토니 치의 작품을 중심으로 - (A Study on The Characteristics of Interior Design In Design Hotels - Focusing on Tony Chi's Works -)

  • 김선영
    • 한국실내디자인학회논문집
    • /
    • 제26권3호
    • /
    • pp.25-33
    • /
    • 2017
  • The purpose of this study is to analyze the characteristics of interior space in his design hotel through the analysis of Tony Chi 's work and to present the direction of the design direction of the interior space of the design hotel in the future based on the results. The results are summarized as follows. First, the characteristics of the interior space of Tony Chi are divided into visual balance, repetitive rhythm, symbolic emphasis, exaggerated scale, design harmony, and physical borderlessness. Second, the spatial composition through visual balance was consistently shown in all cases, mainly by arranging elements such as furniture and lighting symmetrically. Third, the spatial composition through repetitive rhythm did not show its characteristics at the beginning of the works, but gradually appeared as repetitive rhythm expression using bold pattern. Fourth, Toni Chi constantly expressed the space composition through symbolic emphasis during the planning of the design hotel. Fifth, the exaggerated scale was mainly used to express the architectural detail vertically according to the height of the ceiling to express a grand space and appear in many works. Sixth, Toni Chi consistently expressed the composition of space through the harmony of design of oriental and western cultures, classical and modern designs in all cases. Seventh. In order to provide curiosity induction and aesthetic experience, spatial composition through physical borderlessness was used.

불확실한 초기치를 갖는 반복시스템에 대한 유한구간 추종제어 (Finite-horizon Tracking Control for Repetitive Systems with Uncertain Initial Condition)

  • 최윤종;윤성욱;이창희;조재영;박부견
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.297-298
    • /
    • 2007
  • Repetitive systems stand for a kind of systems that perform a simple task on a fixed pattern repetitively and are widely spread in industrial fields. Hence, those systems have been of much interests by many researchers, especially in the field of iterative learning control (ILC). In this paper, we propose a finite-horizon tracking control scheme for linear time-varying repetitive systems with uncertain initial conditions. The scheme is derived both analytically and numerically for state-feedback systems and only numerically for output-feedback systems. Then, it is extended to stable systems with input constraints. All numerical schemes are developed in the forms of linear matrix inequalities. A distinguished feature of the proposed scheme from the existing iterative learning control is that the scheme guarantees the tracking performance exactly even under uncertain initial conditions. The simulation results demonstrate the good performance of the proposed scheme.

  • PDF

반응표면법을 이용한 초음파 임프린팅 공정의 최적화 (Optimization of Ultrasonic Imprinting Using the Response Surface Method)

  • 정우신;조영학;박근
    • 소성∙가공
    • /
    • 제22권1호
    • /
    • pp.36-41
    • /
    • 2013
  • The present study examines the micro-pattern replication on a plastic film using ultrasonic imprinting. Ultrasonic imprinting uses ultrasonic waves to generate repetitive microscale deformation in the polymer film. The resulting deformation heat on the surface of the film causes the surface region to soften sufficiently so that a replication of the micro-pattern can be obtained. To successfully replicate the micro-pattern on a large area of polymer film, a high replication ratio is needed as well as good uniformity over the entire region. In this study, a horn design is investigated by finite element analysis and is optimized through a response surface analysis. In the ultrasonic imprinting experiments, the response surface method was also used to determine the optimal processing conditions for better replication characteristics.

인지이론과 ART 신경회로망에 기반한 한글 문자 분류 모델 (Hangeul Character Classification Model Based on Cognitive Theory and ART Neural Network)

  • 박중양;박재흥;장재혁
    • 한국콘텐츠학회논문지
    • /
    • 제5권5호
    • /
    • pp.33-42
    • /
    • 2005
  • 본 논문에서는 ART 신경회로망의 성능을 개선하기 위해, 불필요한 클러스터의 생성과 변화를 억제하여 효율적인 패턴 분류가 가능하도록 하는 학습 알고리즘을 제안한다. 또한, 패턴 분류의 정확성을 향상시키기 위해 한글의 구조적 특징을 이용한 위치추출 알고리즘을 적용하였다. 제안하는 학습 알고리즘은 현재 학습되는 패턴과 최초 패턴간의 일치도를 비교한 후 리세트 시스템을 작동케 한다. 그 결과, 신경회로 망은 이미 입력되었던 패턴이 다시 입력되어도 새로운 클러스터의 생성을 방지하여 오인식율을 줄이게 된다.

  • PDF

인공땀으로 출력한 인공지문의 균질성 평가 (Evaluation of the consistency and homogeneity of artificial latent fingerprint printed with artificial sweat)

  • 홍인기;홍성욱
    • 분석과학
    • /
    • 제28권1호
    • /
    • pp.26-32
    • /
    • 2015
  • 육안검사, 지문융선의 특징점 비교 및 자동지문식별시스템의 특징점 검색기능을 이용해 잉크젯 프린터로 인공잠재지문을 반복적으로 출력해도 인공잠재지문이 균질하고 일관성 있게 출력된다는 것을 입증하였다. 표준잠재지문 출력용 master fingerprint pattern은 살아있는 사람의 지문을 종이에 찍은 후 이를 스캐너로 스캔하여 만들었고 Adobe Photoshop CS 5의 output level 조절기능을 이용해 이 master fingerprint pattern의 세기를 조절하였다. 인공 표준잠재지문은 master fingerprint pattern을 인공땀으로 채운 잉크젯 프린터 카트리지로 출력하는 방법으로 만들었다. 인공땀으로 출력한 표준잠재지문은 ninhydrin과 1,2-Indandion(1,2-IND)/$ZnCl_2$로 처리하여 현출하였다. 두 시약으로 현출한 지문을 육안으로 검사한 결과 잉크를 묻혀 찍은 원지문에 있는 특징들이 표준잠재지문에서도 동일하게 나타나는 것을 확인할 수 있었다. 인공땀을 이용하여 표준잠재지문 100점을 출력한 후 이 중 50점은 ninhydrin으로, 나머지 50점은 1,2-IND/$ZnCl_2$로 처리하여 현출한 후 AFIS의 연산기능을 이용해 특징점을 검색한 결과 ninhydrin으로 현출한 지문은 $52.4{\pm}2.4$개(range = 48~56), 1,2-IND/$ZnCl_2$로 처리한 지문은 $50.2{\pm}1.9$개(range = 47~53)의 특징점이 검색되었다. 이처럼 표준편차가 적게 나타난 점으로 보아 인공적으로 만든 표준잠재지문은 반복적으로 균질하게 출력된다는 것을 알 수 있었다.

선택적 초음파 임프린팅을 사용한 복합 미세패턴의 복제기술 (Replication of Hybrid Micropatterns Using Selective Ultrasonic Imprinting)

  • 이현중;정우신;박근
    • 대한기계학회논문집A
    • /
    • 제39권1호
    • /
    • pp.71-77
    • /
    • 2015
  • 초음파 임프린팅은 초음파 진동에너지를 이용하여 열가소성 고분자 표면에 미세패턴을 복제할 수 있는 공정으로 짧은 성형시간에 적은 에너지로 미세패턴 복제가 가능한 장점이 있다. 최근에는 마스크 필름을 사용한 선택적 임프린팅 기술과 다중 패턴성형이 가능한 반복적 임프린팅 기술이 개발되었다. 본 연구에서는 선택적 초음파 임프린팅에 반복적 임프린팅을 접목시켜 다양한 형태의 다중 복합 미세패턴의 복제기술을 개발하였다. 이를 위해 미세 프리즘 패턴을 포함한 금형과 다양한 형태의 마스크 필름을 사용하여 선택적 연속성형 및 반복성형을 통해 다양한 형태의 미세패턴을 복제할 수 있는 임프린팅 기술을 개발하였다. 또한 복제된 미세패턴 영역에 대해 레이저 조사실험을 실시하여 다양한 형태의 광확산 특성을 갖는 필름을 개발할 수 있음을 확인하였다.

여수세계박람회와 지역문화의 융합을 기반으로 한 패션문화상품 디자인개발 (Design Development of Fashion Cultural Products based on Convergence of International Exposition Yeosu and Regional Culture)

  • 김선영
    • 복식
    • /
    • 제61권1호
    • /
    • pp.58-68
    • /
    • 2011
  • With Expo 2012 Yeosu to be held in 2012, this study intends to propose designs for fashion cultural products into which the characteristics of local cultures of Yeosu are fused. Using symbols of Expo 2012 Yeosu and cultural symbols of Yeosu City as motifs, this study will develop patterns and then, apply them to neckties, handkerchiefs, and T-shirts. Adobe Illustrator CS2 and Adobe Photoshop CS2 will be used. This study developed basic motifs so that cultural resources using camellia, Odong Island, and the Turtle Ship, which represent Yeosu City, could be well harmonized with the topic of Expo 2012 Yeosu. This paper set three basic motifs of new formative images, using graphic images that were made by omission of forms, simplification, overlap, repetition, and calligraphy of the name of Yeosu holding the event. Each set motif was expanded to three motifs again through change, conversion, and mixture of colors, and three types of repetitive applied patterns were developed through revolution, symmetry, repetition, and reversal of each motif. The modern and refined image for neckties, to which the developed motif was applied, was made by directly applying the repetitive pattern of each motif or by making $45^{\circ}$ revolution. For handkerchiefs, revolution, enlargement, reduction, and gradation were applied to the motif so the pattern could be highlighted to the maximum and finally, a colorful image was developed. For T-shirts, three designs-a half-sleeved box type, a sleeveless round neckline type, and a sleeveless V-neckline tight type-were developed, through which availability of the design was increased. Through enlargement, reduction, revolution, and repetition of each motif, this paper layout the pattern on the whole part of a T-shirt, pursuing a decorative and casual image.

가스 용해를 고려한 금형내압제어 사출성형공정의 마이크로패턴 충전 해석 (Numerical Analysis of Micro-pattern Filling with Gas Dissolution by Injection Molding Process)

  • 박성호;유형민;이우일
    • 한국기계가공학회지
    • /
    • 제13권4호
    • /
    • pp.21-27
    • /
    • 2014
  • The injection molding process has several advantages enabling it to produce large quantities of molded plastic products using a repetitive process. In recent years, it has been necessary to develop an injection molding process with micro/nano-sized patterns for application to the semiconductor industry and to the bio/nano manufacturing industry. In this study, we apply gas pressure to the inside of a mold and consider the gas dissolution phenomenon for a resin filling into a micro pattern with a line structure. Using numerical analysis, we calculate the filling ratio with respect to time for various internal gas pressures and various aspect ratios of the micro-patterns.