• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 추계 학술대회 학술발표 논문집
• /
• pp.118-121
• /
• 2003

Generally, the repeater in CDMA(Code Division Multiple Access) included HPA(HI-Power Amplifier) to amplifier communication signals. Also , HPA contained PD(Predistortor) to maintain the linearization of amplifier characteristics. A configuration component of PD have been used electricity nonlinear devices such that diode. But this diode takes many influences at the circumstance temperature. Consequently, it can't maintain output linearization, and drop the communication quality. The manufacturer set bias of the circuit to the manual at the first out of ware-house low But the Q-point changes according to the change of the high temperature or low temperature. Therefore, we designed a system to maintain the Q-point by FDM(Fuzzy Decision Maker) in this paper.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.586-589
• /
• 2003

Repeater is developed. Based on the systems The up-converter of the WCDMA Digital Optic pecifications, the structure of the up-converter is accomplished and its block diagram is drawn. The up-converter is implemented according to these block diagrams. Subsequently the low pass filter, the automatic level controlled attenuator, the frequency synthesizer and other components for the up-converter are designed and implemented, and a main board to integrate these modules is also manufactured. To reduce the noise floor of system and suppress the RF spurious noise, a PCB layout is performed carefully. For each module consisting of the up-converter and the entire system, the performance tests are accomplished to check the performance about the specifications.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.462-466
• /
• 2007

This paper proposes an automatic bandwidth control method for the performance improvement of Binary Amplitude Shift Keying (BASK) system for Giga-Bit Modem in millimeter band. In order to improve the performance of the BASK system with a fixed bandwidth, the proposed method is to adjust a bandwidth of low pass filter in receiver using the fuzzy system. The BASK system consists of a high speed shutter of the transmitter and a counter and a repeater of receiver. The repeater consists of four stage converters, and a converter is constructed with a low pass filter and a limiter. The inputs to the fuzzy system are the reminder and integral of remainder of counter, and output is a bandwidth. We used a Viterbi algorithm to find the optimum detection from the output of the counter. Simulation results showed that the proposed system improves the performance compared to the fixed bandwidth.

• 한국전자통신학회논문지
• /
• 제6권2호
• /
• pp.274-279
• /
• 2011

이동통신 시스템의 성능을 증가시키기 위해서 다중안테나 기술 중의 하나인 빔포밍(beamforming) 기술을 적용하고자 하는 노력들이 많이 이루어지고 있다. 이러한 빔포밍 기능을 수행하기 위해서는 여러 RF 안테나 패스간의 위상 및 진폭차를 주기적으로 보정해 주는 절차가 필요한데, 이를 RF-패스 보정절차(calibration) 라고 한다. 하지만, 현재 Mobile WiMAX 기지국에서 사용되고 있는 RF-패스 보정 방법은 중계기가 연결될 때에 문제가 발생될 수 있다. 본 논문에서는 이러한 문제점을 기술하고 이를 해결하기 위한 새로운 보정절차 방법을 제시한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.185-188
• /
• 2001

In this paper, we design and implement high-power amplifier with 18 watt for W-CDMA repeater. We simulate microwave circuits using RF simulator, ADS1.3 and optimize the circuit to obtain the linear and high power using Harmonic balance method. Harmonic balance is an excellent method in the analysis of nonlinear system. The HPA is fabricated on tefron substrate($\varepsilon_{{\gamma}}$=3.48, h=0.5mm, T=0.035mm). From the measured result, the HPA has gain of 52dB, 1 dB compression power of 52.8dBm and good ACPR (Adjacent Channel Power Radio) performance.l Power Radio) performance.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.737-740
• /
• 2003

대부분의 디지털 방송 시스템에서는 한정된 지상파 주파수 자원 때문에 최소한의 주파수 자원을 사용하는 SFN 또는 OCR등의 기법을 제공하고 있다. 본 논문에서는 미국 ATSC방식의 OCR과 유럽의 DVB-T방식의 SFN에 대한 특성을 연구 분석하고 중계기 및 송신기의 위치에 따른 수신영역을 시뮬레이션 하기 위한 방안을 제시한다.

• 대한전자공학회논문지
• /
• 제12권2호
• /
• pp.28-30
• /
• 1975

2선식-4선식 접속을 위한 새로운 회로구성을 제안하였다. 이 회로구성은 현재까지 알려져 있는 회로구성과는 달라 전화기잡음방지회로 뿐만 아니라, 전화전송계의 임의의 중계장치에 이용될 수 있다. 이것은 또 IC화한 형태로 실현될 수 있다. In this paper a new network configuration for two-line four-line connection in telephone transmission system is proposed. It is proved that this network configuration is useful not only in an anti-sidatone circuit for telephone substation but also in a repeater station in the telephone system. It can ba realized in an integrated circuit.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.43-47
• /
• 2001

A compact size microstrip antenna element using FR-4 substrate is proposed for use in repeater and base stations. Two stacked patches are aperture-coupled by two split feedlines. Rectangular stubs on the split feedlines are laid under the aperture and have the effect of considerably lowing the magnitude of $S_{11}$ [dB] and broadening impedance bandwidth. The designed structure has been fabricated and measured. Based on 20 dB, the return loss bandwidth is about 16.8% (1.86 GHz~2.20 GHz), which covers the frequency range assigned for IMT-2000 with a large margin. The overall dimension of the proposed antenna structure is 37 mm$\times$41 mm$\times$19mm (very compact). The antenna gain is more than 7.5 dBi over the required frequency range.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.575-582
• /
• 2007

In this paper, a 100 Watt high power amplifier has been implemented and performed evaluation, which is operating at UHF band ($470\;{\sim}\;806\;MHz$) for Digital TV repeater. To achieve increase of bandwidth and high power capability, 3-way power combiner and divider of Wilkinson type was adopted. In order to measure the fabricated 100 Watt power amplifier, the estimation technique function which makes equivalent mask was used. As a result of the measurement, the existence of pilot signal is confirmed and the signal transmitted at the rated output power 100 Watt is brought out the flat feature through 6 MHz bandwidth. and it resulted that its value was less than -47 dB at the edge of radiation channel and less than -110 dB at more than 6 MHz position from channel edge.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.105-106
• /
• 2007

A slot antenna with bazooka balun is designed and implemented for PCS repeater. The proposed antenna improved the return loss and radiation pattern of the slot antenna as combining with the bazooka balun. The antenna was designed by using 3D simulations program, MWS (Microwave Studio). The test result of the slot antenna shows that the return loss is under -10 [dB] for all frequency bands of interests in PCS and maximum gain is about 5.59 [dBi]. And the antenna also shows omni-directional radiation pattern.