• Journal of the Korean Home Economics Association
• /
• v.35 no.2
• /
• pp.137-145
• /
• 1997

The effect of accumulated residual soils in wear and wash tests on yellowing of white dress shirt was studied. The test samples after repeated home laundry at 20 households for six months were measured residual soils, $\Delta$b*.As well as, correlation between residual soils and yellowing was also examined. As a result, residual soils increased with number of wear and wash cycles, a little decreased in using with enzyme detergent. The b* value of test samples with fluorescent whitening agent were distributed -12.850~0.291. Correlation coefficient between sebum soils, protein soils and $\Delta$b* was 0.98, 0.58. Ultimately, residual sebum soils have more higher correlation than residual protein soils. Hence, residual sebum soils have more effect on yellowing than residual protein soils. therefore, effective a device as improvement of laundry condition and textile development needs for decrease of sebum soils.

• Journal of the Korean Home Economics Association
• /
• v.35 no.1
• /
• pp.257-262
• /
• 1997

In this thesis considering the problems shown in the usage of interlining of clothes and in the process of sewing the breaking away strength which is meant by adhesion is analysed by experimennt in which Polyamide content is dealed with at the 5 level to raise the adhesive strength by using the one-sided non woven adhesive interlining made in this country as the samples. After examing the optimum in the process of Cotton and polyester fabrics and adhered fabrics practical for blouse and jacket and analysing the breaking away strength the wanted property of matter and the change with the repeated laundry We reach at the following results. 1. The adhesive strength of the two adhered fabrics were strongly appeared in order of cotton>polyester. 2. The order of the breaking away strength by the interlinings of adhesive fabrics was A5> A4> A3> A2> A1. 3. The breaking away strength of the two adhered fabrics was weakened by the repeated laundry and the breaking away phenomena were fewer under the most suitable conditions than the various conditions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.4
• /
• pp.549-559
• /
• 1994

The purpose of this study was to study accumlated residual soils which may be one of the causes for yellowing of worn cloths. Wear and wash tests of white cotton undershirts were repeated at 30 households sellected at random over a period of 60 days. Laundry conditions were similar to home laundry habits in a fact-finding survey, using a powdery heavy duty detergent containing no enzymes or enzymes. The subjects in this study were survey of laundry actual condition, the undershirts from prior to and after the final washing was measured residual soils, $L^*a^*b^*$ value and mellowness index of CIE system. D3ta were analysed by simple correlation analysis of wear and wash cycle, residual soils, whiteness The results obtained were summarized as follows: 1. Using pattern of washing machine, Presoaking was no singinificant differnece in general characteristics of survey respondent. Laundry frequency was significant difference in income level, occupation of housewives whether or not. Use of cold and hot water was significant difference in residence shape. 2. The analyzed consequences of recognition and actual behavior in connection with laundry were found variables each other to have independence or not. 3. Amount of residual sebum soils is using non-enzyme detergent were much more than in using enzyme detergent, increased linearly with increase of the number of wear and wash cycles. 4. Residual protein soils with increase of the number wear and wash cycles less than in laundering more easy than sebum soils. Since accumulated residual sebum soils were much more than residual protein soils. 5. Increase of residual soils was raised mellowness index and diminshed whiteness. yellowness index of residual sebum soils was higher than protein soils. If increase of whiteness will be incresed, amount of residual sebum soils will be decreased sebum soils. Because amount of residual sebum soils much more than protein soils, yellowness index of residual sebum soils was more higher than that of protein soils.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.6 no.1
• /
• pp.17-26
• /
• 1982

This article aims to determine the interrelation among exfoliation strength, the repeated laundry number, the coefficient of friction and the cover factor about the fusible interlining produced by using different amount resin. The practicality of stiffness and warmth of the fusible interling were examined. The results are summarized as follows: 1) As a factor that affecting the exfoliation strength of fusible interlining, the coefficient of friction and the cover factor about the fusible interlining produced by using different amount resin. (2) Regardless of the weight of the resin, the exfoliation strength of fusible interlining declined gradually as the repeated laundry number increased. This tendency arises much more in the case of the filament yarn fabric than in that of the spun yarn fabric. The stability of the exfoliation strength was better, regardless of the increase of the repeated laundry number, when the weight of the weight of the resin was 10 g/$m^2$. (3) The spun yarn fabric, which has more fuzz than the filament yarn fabric, is more suitable for the fabric of fusible interlining. The smaller the cover factor difference between the face cloth and the interlining cloth, the stronger the exfoliation strength. (4) When the stability of the shape is a necessary factor in the consumption of the fusible interlining, a resin weight of 20 g/$m^2$ is the most suitable; however when stiffness and warmth are necessary factors, a resin weight of 10 g/$m^2$ is the most suitable.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1798-1811
• /
• 2010

This research evaluates the changes in the comfort-related properties of high-density fabric, such as moisture permeability and waterproofness, in order to assess the relative importance of laundry conditions for clothing properties after repeated laundering and suggest the best laundering conditions for high-density fabric through the identification of the most influential factor. A commercial high-density fabric was washed 25 times in a drum-type washer using nine different laundry conditions based on profiles derived from a fractional factorial design. To evaluate the changes in the comfort-related properties of the fabric, pore size, air permeability, water vapor transport, water repellency, and water resistance were measured. The comfort-related properties of the fabric deteriorated after repeated laundering by the damaged surface finish; in addition, the damaged surface also changed the pore size. As a result, the water repellency and water resistance decreased. The detergent was the most responsible factor to change the properties among the four factors of detergent, hardness, temperature, and RPM. The best laundering conditions for the fabric was a neutral detergent, soft water of 70ppm, a temperature of $15^{\circ}C$, and 30rpm.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.341-348
• /
• 2019

In order to reduce the safety risk of forestry operations, this research was conducted to examine the suitability of chainsaw protective pants after repeated laundering, testing four different products that are currently used in hand-held chainsaw operations. Laundering was repeated 10, 20, 30, 40, and 50 times. After washing, we measured the shrinkage ratio of 17 measurement positions mostly affecting the safety of forest operations and suggested the expected safety life cycle of chainsaw protective clothes. The results showed that most of the products have only one measurement position where the standard shrinkage ratio (<6%) was exceeded after 20 washings, and that the lateral direction of measurement positions shrank more than the vertical one. The numbers of repeated launderings and measurement positions were found to be significant factors influencing the shrinkage ratio (p<0.05). In the shrinkage rates for 17 measurement positions, there were significant correlations between five of the measurement positions (a, b, g, j, and n) and the number of repeated launderings (p<0.05). Therefore, the results suggest that about 10 months would be suitable for an adequate safety lifetime for chainsaw protective pants. The relationship between the number of repeated launderings and the measurement positions will be further analyzed in detail to examine the durability of chainsaw protective pants.

• The International Journal of Costume Culture
• /
• v.7 no.2
• /
• pp.103-111
• /
• 2004

The shrinkproof-finished wool fibers treated with resin coating and chlorination methods were used to find out an optimal shrinkproof finishing method keeping the quality properties of wool fabric to manufacturers. Shrinkage during repeated washing, electrostatic propensity, thermal resistance and pilling propensity of shrinkproof-finished wool knits, and analysis of finishing methods were measured. Upon the results from the surface examination of shrinkproof-finished wool fibers, the patterns of scale layer and degree of scale removal were subject to change according to the finishing processes. The shrink resistance was significantly enhanced on repeated washing of shrinkproof-finished knits, especially, chlorinated wool. Addition of strong physical force and alkali detergent applied in this washing experiment brought about superior effects with the low shrinkage rate although it was very severe washing conditions for wool fabrics. The results from the washing experiment implies that shrinkproof-finished knitted fabrics can be machine washed at individual households with other ordinary laundry. There was some changes and variation found in thermal resistance, electrostatic propensity, and pilling, however, it seems to be minor within standard limits. Therefore, shrinkproof-finished knitted fabrics did not bring serious changes to other physical properties comparing with original wool, which helps consumers handle wool knitted clothes more conveniently.

• The Research Journal of the Costume Culture
• /
• v.12 no.6 s.53
• /
• pp.945-952
• /
• 2004

Shrink-resist effects and properties of the knitted fabrics from wool/acrylic(W/A) fiber blends were determined to find out an optimal blending ratio keeping the quality properties of wool products. The test fabrics were knitted by a weft knitting machine with all needle knitting structure ($0{\times}0$ rib) under the same knitting conditions with five different types of yarns: $W100\%,\;A100\%$, and W/A blended yarns(70/30, 50/50, 30/70). Shrinkage during repeated washing, electrostatic propensity, thermal resistance and pilling propensity of W/A knits. The shrink resistance was significantly enhanced on repeated washing of W/A knits, especially, over $50\%$ acrylic blended knits. Addition of strong physical force and alkali detergent applied in this washing experiment brought about superior effects with the low shrinkage rate although it was very severe washing conditions for wool fabrics. The results from the washing experiment implies that W/A blend knits can be machine washed at individual households with other ordinary laundry. There was some changes and variation found in thermal resistance, electrostatic propensity, and pilling. W/A 50/50 blended knits did not bring serious changes to other physical properties comparing with original wool, which helps consumers care wool knitted clothes more conveniently.

• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.192-198
• /
• 2000

Influence of the fluorescent whitening agent(FWA)'s adsorption on the whiteness of cotton and on the color change of the dyed fabrics was investigated by repeating wash cycles. Cotton 100% and cotton60/polyester40 blended fabrics were dyed pink, blue and yellow, and cyanuric chloride diamino stilbene(CC/DAS) and distyryl bisphenyl(DSBP) were used for the FWA with laundry detergents. Fabrics were washed at $20^\circ{C}$ with Terg-o-tometer. The FWA adsorption amount was measured by the absorption intensity for the pyridine-water extracted solution. The FWA adsorption increased on the cotton fabric with the wash cycles. Though adsorption of CC/DAS continuously increased up to the 20th cycle, that of DSBP increased sharply before the 10th cycle and reached an equilibrium. The whiteness of the fabrics dried in the shade was greater than that dried under the sunlight through window glass. The color change of dyed fabrics was increased by the number of wash cycles. Pink changed more greatly than blue, yellow or grey cloth. The color change(\Delta{E)}$ of dyed fabric washed repeatedly up to the 20th cycle with the detergent without FWA was less than 1. It is recommended to wash pale colored fabric with the detergent free of FWA.

• Human Ecology Research
• /
• v.56 no.5
• /
• pp.417-424
• /
• 2018

The use stage of a textile product impacts sustainability more significantly than other stages of the product's life cycle due to repeated washing and drying. This study determines efficient washing conditions, with high detergency, to reduce energy consumption from excessive washing and improve the washing process sustainability. Detergency was measured at various washing temperatures ($20^{\circ}C$, $40^{\circ}C$, and $60^{\circ}C$) and time (10 min, 20 min, and 30 min) using standardized soiled fabrics, i.e., 100% cotton, polyester/cotton (65%/35%), and 100% polyester woven fabric soiled with pigment/sebum, carbon black/mineral oil, soot/mineral oil, cocoa, blood, and red wine. Detergency at the washing condition of $20^{\circ}C$ and 30 min was higher than that at $40^{\circ}C$ and 10 min. In addition, detergency at the condition of $40^{\circ}C$ and 30 min was also higher than that at $60^{\circ}C$ and 10 minutes. This may be because a reduced washing effect at low washing temperatures was complemented by increased mechanical action over a long time. Further, washing temperature and time, with the same detergency, differed based on the type of fiber and soil. Also, the influence of a detergent on the detergency depends on the type of soil. The results suggest that energy and detergent have been consumed more than necessary in actual laundry. According to each type of fiber and soil, washing conditions designed to reduce the energy consumption of the washing process while maintaining the same detergency, were determined.