• Korean Journal of Adult Nursing
• /
• v.17 no.1
• /
• pp.128-138
• /
• 2005

Purpose: As population of elderly people continues to grow, successful aging has risen to the top of the nursing science agenda. The successful aging includes maintenance of the cognitive and physical functions, as well as emotional well-beings. This study was carried out to evaluate effects of the environmental enrichments on cognition of institutionalized elderly. Method: The population was selected among the elderly aging over 65 residing at two of institutions. A quasi experimental design was used with non-equivalent control group. Study subjects were thirteen for each group. For the experimental group, physical, social and symbolic environmental enrichment program was provided for six weeks. The data were analyzed by repeated measure ANOVA and repeated measure ANCOVA using SPSS Win 11.0. Result: Compared to control group, the experimental group showed a significant difference on DSF(F=3.29, p=.046), and TMTA(F=4.76, p=.013) of cognitive function, and depression (F=5.56, p=.007) of emotional distress after 1 and 12 weeks of environmental enrichment program. Conclusion: Findings indicate that physical, social, and symbolic environmental enrichment was effective to partially prevent from cognitive decline, and to decrease emotional distress of elderly. As a nursing intervention, environmental enrichment program for elderly should be expanded for nursing practice to promote healthy aging and to offer support to the growing population of elderly. Further research should be conducted to evaluate the effect on the community elderly.

• Archives of Plastic Surgery
• /
• v.37 no.3
• /
• pp.304-308
• /
• 2010

Purpose: Many causes for triggering or locking of the fingers have been discussed in other literatures. The most common one is known stenosing tenosynovitis, which causes, a mismatch between the volume of the flexor tendon sheath and its contents. However, repeated trauma to the hand is uncommon cause of trigger finger. Therefore, we present a case of a rare condition of stenosing tenosynovitis which developed from a repeated relatively weak superficial flexor tendon injury. Methods: The patient was a 62-year-old woman who showed a painless, fixed and round mass on her right hand with no particular cause. Active and passive range of motion of the metacarpophalangeal joint of long finger was limited in flexion and extension. Ultrasonographic finding showed injured flexor digitorum superficialis tendon had fibrillar architecture with swelling between hyperechoic synovial membrane and hypoechoic surrounding area. Surgical exploration revealed that a bunched portion of the flexor digitorum superficialis and A1 pulley cause triggering during operation after adhesiolysis of scar tissue. Results: After releasing the A1 pulley, the range of motion of the metacarpophalangeal joint of long finger showed no limitation and histological examination of the subcutaneous tissue revealed fibrous fatty degeneration. In this case, releasing the A1 pulley with adhesiolysis of the subcutaneous scar tissue was successful and we obtained good functional outcome. Conclusion: We examined a patient in whom a repetitive impact forces to the palm caused longitudinal tear of the flexor tendon, leading to trigger finger. We experienced a rare case of stenosing tenosynovitis and trigger finger caused after close injury to flexor digitorum superficialis and its degenerative changes that caused mass like effect. To the best of authors' knowledge, our case of close injury to the flexor digitorum superficialis and unique morphologic change before rupture of tendon is rarely to be reported.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.379-386
• /
• 2009

During running, the human body experiences repeated impact force between the foot and the ground. The impact force is highly associated with injury of the lower extremity, comfort and running performance. Therefore, shoemakers have developed shoes with various midsole properties to prevent the injury of lower extremity, improve the comfort and enhance the running performance. The purpose of this study is to investigate the influence of midsole hardness on vertical ground force and heel strike angle during men's and women's running. Five male and five female expert runners consented to participate in the study and ran at a constant speed with three different pairs of shoes with soft, medium and hard midsole respectively. In conclusion, regardless of gender, there was ill significant difference among three shoes in maximum vertical ground reaction force, impact force peak and stance time. However, the loading time decreased and the loading rate increased as the midsole became harder. Female subjects showed more sensitive reaction with respect to the midsole hardness, while male subjects showed subtle difference. The authors expect to apply this results for providing a guideline for utilizing proper midsole hardness of gender-specific shoe.

• Journal of Global Scholars of Marketing Science
• /
• v.12
• /
• pp.99-119
• /
• 2003

A model is proposed for the role of emotional intensity of a web site, and the moderating influence of product involvement, in the Integrative Framework of persuasion (Meyers-Levy and Malvaiya 1999). The model also appropriately operationalizes the constructs emotional intensity of a web site and product involvement The three routes to persuasion, Central, Peripheral, and Experiential correspond to high, moderate, and low involvement (Meyers-Levy and Malaviya 1999). The involvement construct is measured from message recipients using the Personal Product Inventory (Pill, which was developed to capture the concept of product involvement (Zaichkowsky 1985). The conceptualization of the Personal Product Inventory is a contextrree measure that also has robust psychometric properties when applied to advertisements (Zaichkowsky 1994). The propositions highlight the expected importance of emotional intensity of a web site. The moderating influence of product involvement is also proposed. Specifically, what this work proposes is that the emotional intensity of a product site has a larger impact on attitude change under low product involvement, as opposed to moderate product involvement. Support for this reasoning can be found in the persuasion literature (Petty et al 1986). The Petty et al (1986) frame work is a dual process descriptive and predictive frame work in the area of altitude formation and change. Recently, Myers Levy and Malaviya (1999) have proposed a tri-process framework. This is in tum based on the dual process model of Petty et al. (1986). The study outlined in this paper aims to deepen the Meyers Levy and Malaviya (1999) and frame work. The propositions outlined in the model are empirically tested using a repeated measures experimental design. The emotional intensity is measured using a scale that is based on experts judgments. Using a paired comparison t-test two sites are determined to be of high and low emotional intensity. The model is tested using a repeated measures experimental design. The first independent variable Emotional Intensity of the site is manipulated. The Second independent variable, Personal Product Inventory is measured. While, the dependent variable, product altitude change will also be measured. Utilizing Analysis of Variance (ANOVA) the data is analyzed using SPSS. The results suggest that besides the rational content of messages their emotional content can also influence attitude change. Specifically, it is proposed that the manipulation of emotional intensity of a product Web site has a greater impact on product altitudes under high and low product involvement conditions, rather than moderate product involvement. However, the results for product involvement as a continuous variable has a p value of 0.09. Further, the results for three levels of product involvement were far from significant. For two levels of product involvement also, the results were insignificant, the p value approached 0.20. This evidence indicates that it is premature to conclude that there are three routes to persuasion. A caveat, however, must be added, in that the manipulations may not have been strong enough to test the proposed hypotheses. Further, undoubtedly, there is unequivocal evidence the emotional intensity of a product Web site, as measured here, has a direct impact on product attitudes.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.4
• /
• pp.9-17
• /
• 2014

Purpose : The purpose of this study was to ascertain the effects of air-pressure cervical traction on the tension headache in the adults. Method : All subjects were treated with air-pressure cervical traction while 15 minutes a day, 3 times per week, for 4 weeks. The effects of air-pressure cervical traction were evaluated by HIT-6(headache impact test), VAS, and flexion, extension, left right flexion, left right rotation of cervical ROM. The measured data were analyzed by using repeated ANOVA. Especially in order to investigate the effect of air-pressure cervical traction. The comparison with among three measurement time. Results : The results of this study were as follows; 1) Prior and two weeks measurement did not show significant differences. The head forward posture than before the experiment, each experimental group was significantly increased(p<.05). 2) Prior and two weeks measurement did not show significant differences. The experimental group than ever cervical ROM of the movable range increased significantly(p<.05). 3) The experimental group was significantly lower than before the VAS(p<.05). 4) HIT score of the experimental group was significantly lower than before(p<.05). Conclusion : These findings suggest that air-pressure cervical traction had effect on the tension headache in the adults.

• The Journal of Korean Physical Therapy
• /
• v.28 no.2
• /
• pp.136-141
• /
• 2016

Purpose: In this study experiments were performed during 6 weeks with 40 adults, 20 subjects in the waist stabilization exercise with blood flow restriction group and 20 subjects in the waist stabilization exercise without blood flow restriction group, in order to determine the impact of waist stabilization exercise on White Area Index (WAI) followed by blood flow restriction. Methods: Thickness of external oblique abdominal muscle, internal oblique abdominal muscle, and transversus abdominis muscle, as well as density and WAI of external oblique abdominal muscle were measured, followed by performance of repeated ANOVA. Results: Significant difference in thickness of external oblique abdominal muscle according to periodical difference was observed between groups (p<0.05). Significant difference in thickness of internal oblique abdominal muscle and transversus abdominis muscle according to periodical difference was observed between groups (p<0.05). Significant difference in density and WAI of external oblique abdominal muscle according to periodical difference was observed between groups (p<0.05). Conclusion: In conclusion, significant difference was observed after waist stabilization exercise with blood flow restriction. These results can be used as basic data for future research on waist stabilization exercise and blood flow restriction exercise.

• Journal of the Korean Institute of Gas
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2009

Recently, the vibration of underground structure due to high speed railway loads has been increased substantially as compared with middle and slow speed. The buried gas pipelines under continuous impact forces and repeated loading are more influenced by the vibrational loads than another pipelines. However, the static analysis was not enough to allow for the effect of vibrations because it uses impact factors for the design or analysis process. In this study, characteristics of Pipelines was quantitatively estimated through each conditions of soil covers and train speed, and the new vibration prediction is presented about the vibrational velocity.

• Journal of Powder Materials
• /
• v.5 no.4
• /
• pp.250-257
• /
• 1998

The synthesis of titanium silicides ($Ti_3Si$, $TiSi_2$, $Ti_5Si_4$, $Ti_5Si_3$ and TiSi) by mechanical alloying has been investigated. Rapid, self-propagating high-temperature synthesis (SHS) reactions were observed to produce the last three phases during room-temperature high-energy ball milling of elemental powders. Such reactions appeared to be ignited by mechanical impact in an intimate, fine powder mixture formed after a critical milling period. During the high-energy ball milling, the repeated impact at contact points leads to a local concentration of energy which may ignite a self-propagating reaction. From in-situ thermal analysis, each critical milling period for the formation of $Ti_5Si_4$, $Ti_5Si_3$ and TiSi was observed to be 22, 35.5 and 53.5 min, respectively. $Ti_3Si$ and $TiSi_2$, however, have not been produced even till the milling period of 360 min due to lack of the homogeneity of the powder mixtures. The formation of titanium silicides by mechanical alloying and the relevant reaction rates appeared to depend upon the critical milling period, the homogeneity of the powder mixtures, and the heat of formation of the products involved.

• Journal of Biomedical Engineering Research
• /
• v.31 no.1
• /
• pp.33-39
• /
• 2010

During running, the human body experiences repeated impact force between the foot and the ground. The impact force is highly associated with injury of the lower extremity, comfort and running performance. Therefore, shoemakers have developed shoes with various midsole properties to prevent the injury of lower extremity, improve the comfort and enhance the running performance. The purpose of this study is to investigate influence of midsole hardness on shock absorption along the human body during running. Thirty two expert runners consented to participate in the study and ran at a constant speed with three different pairs of shoes with soft, medium and hard midsole respectively. Using accelerometers we measured the shock absorption from shoe heel to cervical vertebral column. In conclusion, at the shoe heel, shock was the greatest with the hard midsole. However because most shock was absorbed between shoe heel and the knee, notable influence of midsole was not detected upper knee. At shoe heel, regardless of midsole hardness, the shock of younger female was the greatest. The authors expect to apply this result for providing a guideline for utilizing proper midsole hardness for manufacturing age and gender-specific shoe.

• Transactions of Materials Processing
• /
• v.27 no.4
• /
• pp.211-221
• /
• 2018

To estimate the recycling feasibility of high melt-indexed polycarbonate, 3.5 inch LGP, tensile, flexural and impact specimens were injection-molded and the LGP was shredded into scraps. The scraps were injection-molded again and this process was repeated for 4 times. Properties of the sample, i.e., optical properties, mechanical properties and number average molecular weight were measured at each cycle. Based on the results, as the number of reprocessing increased, transmittance decreased at low wavelength and color coordinate was changed systematically to yellow. Yellow index increased more than twofold during 4 recycling processes. On the other hand, the number average molecular weight decreased during recycling processes. Flexural and impact strength showed no tendency according to the number of recycling, but tensile strength decreased sharply after the third recycling process. Based on these properties, it was concluded that the number of recycling for high melt-indexed polycarbonate allowed in this study was one.