• Journal of the Korean housing association
• /
• v.14 no.4
• /
• pp.11-19
• /
• 2003

This study intends to predict prospective defects and establish the plan of Preventive Maintenance through research and analysis of defect occurrences and their repair costs in the public equipment of ‘H’ apartment house from 1998 to 2001. According to results of the analysis, more than 90% of defects and their repair costs for 4 years of the building have occurred in heating, hot water and water supply equipments. In case of specific classification in each equipment, more than 60% of defects were found at hot water pipes and heating pipes, and their repair costs covered more than 60% of the total defect costs. After two repairs by ‘Preventive Maintenance’ had been performed in the year 1998, total defects and defects of each equipment each yew have increased in number from 1999 to 2001. But total repair costs and repair costs of each equipment have not increased as time has gone by, because repair costs have relationship with the price of materials and labor, the part of defect and the scale of repair.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.48-49
• /
• 2019

The number of disputes over defects after completion of construction work in apartment buildings is increasing every year. In this situation, the prediction of reasonable defect repair costs is very important. In this paper, we are going to collect basic data for predicting defect repair costs through the correlation analysis of the construction period and defect repair cost of apartment houses. For this purpose, first of all, the construction period and defect repair cost of apartment houses were analyzed to analyze the construction period for each type of work, the construction period for each project type, and the construction period for each standard calculation. Next, the correlation between defect repair cost and the independent variables of the candidate was conducted. According to the analysis, the ratio of framing air, the ratio of finishing air, and the number of delay days showed strong correlation.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.9 no.2
• /
• pp.1-8
• /
• 2010

This study is to present an engineering solution for the repair frequency and repair rates of a building. The existing data for the repair frequency and repair rates are used to draw the probability distribution for the generalized repair frequency and repair rate in a building. The suggested methodology can be widely used for most buildings to estimate the legal repair frequency and repair rates. Also, the methodology can be applied to resolve the risks on the maintenance costs in LC (Life Cycle) plans or LCC (Life Cycle Cost) analysis. As the future studies, there are the multiple regression analysis including the parameters on incurred costs and the decision methods on efficient repair and replacement.

• Asia pacific journal of information systems
• /
• v.34 no.2
• /
• pp.565-584
• /
• 2024

More than 1 million automobile insurance repairs occur per year globally, and the related repair costs add up to astronomical amounts. Insurance companies and repair shops are spending a great deal of money on manpower every year to claim reasonable insurance repair costs. For this reason, promptly predicting insurance claims for vehicles in accidents can help reduce social costs related to auto insurance. Several recent studies have been conducted in auto insurance repair prediction using variables such as photos of vehicle damage. We propose a new model that reflects auto insurance repair characteristics to predict auto insurance repair claims through an association rule method that combines gradient descent and location information. This method searches for the appropriate number of rules by applying the gradient descent method to results generated by association rules and eventually extracting main rules with a distance filter that reflects automobile part location information to find items suitable for insurance repair claims. According to our results, predictive performance could be improved by applying the rule set extracted by the proposed method. Therefore, a model combining the gradient descent method and a location-based association rule method is suitable for predicting auto insurance repair claims.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.49-54
• /
• 2006

The purpose of this study was to determine the effect of expansion joint spacing (slab size) on the life cycle costs of owning Portland Cement Concrete (PCC) airfield pavements. Previous research has shown that slab size has a statistically significant impact on pavement performance. A probabilistic life cycle cost analysis was performed to determine if the effect of slab size on pavement performance would affect the total cost of ownership of PCC pavements. Data from 48 Pavement Condition Index (PCI) inspections of military and civilian airfields were used to develop probability-of-distress-by-condition curves, which were then used to develop probabilistic cost-of-repair-by-condition curves. A present worth life cycle cost analysis was then performed for various slab sizes, using construction costs, rehabilitation costs, and maintenance costs. Maintenance costs were determined by assuming a condition deterioration rate appropriate for each slab size and applying the cost-by-condition curves. The probabilistic cost-of-repair-by-condition curves indicated that smaller slabs are more expensive to repair on a unit cost basis. Life cycle cost analysis showed that larger slabs have a higher total cost of ownership than smaller slabs due to a faster rate of deterioration.

• Architectural research
• /
• v.14 no.2
• /
• pp.75-83
• /
• 2012

Buildings that are more than 10 years old generally have considerable repair and replacement costs due to the rapid deterioration of their systems. For public buildings in particular, which have national and social significance, considerable effort is required not only to ensure a long life cycle and safety but also to minimize the overall public expense. Along with increasing repair and replacement requirements, however, there have been problems related to the establishment of an accurate facility management budget. To address these concerns, a repair and replacement cost management system was constructed. This system manages both invested maintenance and forecast costs to establish a reasonable repair and replacement planning process and budget. The effectiveness of the system was verified through a pilot test targeting one of public Corporation (K).

• Journal of the Korean Institute of Educational Facilities
• /
• v.23 no.6
• /
• pp.27-34
• /
• 2016

Although the scale and number of university facilities have increased, the maintenance of these facilities has not been efficient as maintenance costs incurred during facility operation periods, as well as management time, have not been sufficiently considered. In this study, the maintenance record data of national universities was compared and analyzed to analyze factors that incur maintenance costs according to the uses and costs of the facilities. According to the results, the number of cases of maintenance and repair work for basic educational facilities was shown to be the largest, accounting for 79%. The number of maintenance and repair work occurred according to work type was examined. According to the results, the highest ratio of maintenance and repair work occurred in the field of construction, specifically, the maintenance costs required for facility supplementation accounted for the highest ratio. Maintenance costs per unit area decreased over time in the newer university facilities, while showing a tendency to increase in older university facilities. However, there were cases where maintenance costs did not show any trends due to factors such as the limited maintenance budgets owing to the characteristics of public service facilities and facilities in the stage of deterioration or destruction after the stage of stabilization. This study is considered to be helpful for efficient university facility maintenance plans and budget calculations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.157-161
• /
• 2005

In the FY 2003, the number of registered vehicles in Korea reached 14 million, which is 7.7% increase from the previous year. The increase of number of vehicles has caused a lot of social problem with enormous costs. The social costs related to the vehicles includes environmental costs resulting from pollution and scraping of vehicles, those resulting from life-saving and repairing from car accidents and so on. There have been m any efforts to reduce the social costs in m any areas. As a part of the efforts, there are recent grow ing interests on the damageability & repairability in related industries. In this study, we investigated the cases of two different types of bum per stay. Futhermore, we analyzed their effects on damageability & repairability and reduction of repair cost. So we found that if the manufacturers design new cars with good damageability & repairability, then the total repair cost in crash will be reduced.

• Journal of the military operations research society of Korea
• /
• v.4 no.1
• /
• pp.57-68
• /
• 1978

In forecasting the demand rate of repair parts for old tank types under the limited historical data, this reportan alyzes which techniques give the smallest forecasting error, also economic repair limits and the return for additional repair costs are formulated as a mathematical model

• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.139-146
• /
• 2014

As Crosby notes, the most companies spend 15 to 20% of their sales dollars on quality costs. Generally the most effective way to manage quality costs is to avoid having defects in the first place. In this paper we have studied about the repair(service) problem of domestic gas boiler within warranty period. We develop a system, which man could find the cause of the problem at an early stage and could devise a countermove to the problem under supposing that the service(repair) rate follows exponential distribution and the product is manufactured lot-for-lot continually. Using the developed early sensing system. it is expected to improve the reliability of the product, to save expenses of company and to improve customer's satisfaction. And the system will be expended to incorporate information technology, which can detect the repair rate automatically.