• 구강회복응용과학지
• /
• 제31권3호
• /
• pp.203-211
• /
• 2015

목적: 완전한 골-임플란트 결합을 가졌던 임플란트가 갑자기 골유착을 잃은 경우의 시간에따른 재골유착을 연구하기 위함이다. 연구 재료 및 방법: 23마리 토끼의 좌우 경골에 각각 2개씩 실험목적으로 제작한 RBM임플란트를 식립 후, 6주 후에 1차로 비틀림 제거력을 측정한 다음, 임플란트를 다시 재위치 침하시키고, 4일, 7일, 11일, 2주, 4주, 6주, 그리고 8주의 재침하시간 경과 후 2차로 비틀림 제거력을 측정하고 시편을 제작하여 조직 형태학적 검사를 하였다. 통계학적 검사를 위해 paired t-test를 시행했고, One-way ANOVA와 Tukey's post-hoc test 통해 그룹간 차이를 비교하여 다음과 같은 결과를 얻었다. 결과: 1차 비틀림 제거력과 비교해봤을 때 2차에서 11일 후에는 증가했으며, 2주 후부터 유의성 있게 증가하였다. 형광조사검사에서, 7일 후부터 골-임플란트 계면 사이에 형광밴드가 나타나는 광물화 현상이 관찰되고, 11일 후부터는 분명한 골 형성이 나타났다. 결론: 토끼에서는 11일 이후가 되면 충분한 재골유착을 얻을 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제7권1호
• /
• pp.62-68
• /
• 2015

PURPOSE. The purpose of this research was to evaluate the amount of reosseointegration after counter torquing (reverse torque) and transposing the installed implants at different times. MATERIALS AND METHODS. This study was done on ten tibiae of five cross-bred dogs. At the first day one implant was installed in each tibia. After one week half of the implants were randomly counter torqued (1WCT) and the other half were explanted and reimplanted in a new juxtaposition site (transposed)(1WT). At the same time three new implants were installed in each dog, one of them was considered as one week control (1WC) and remaining two as 8 week groups (8WCT&8WT). After eight weeks the 1WCT and 1WT implants were loosened by counter torque and the quantity of needed force for liberation was measured with the digital device (BGI). At the same time one implant was installed in each dog as eight week control (8WC) and the same protocol was repeated for 8 week groups after another 8 weeks. RESULTS. All implants were osseointegrated. Mean quantities of osseointegration in case groups indicated better amounts rather than control groups. CONCLUSION. Counter torque or transposition of the installed implants one week or eight weeks after the implantation did lead to osseointegration.

• Journal of Periodontal and Implant Science
• /
• 제30권4호
• /
• pp.821-836
• /
• 2000

The Peri-implantitis causes inflammation of periodontal tissue and bone loss. It contaminates surface of implants. Therefore, guided bone regeneration has been used for the treatment of this disease. For the reosseointegration of the exposed surface, various mechanical and chemical methods have been used for cleaning and detoxication of implant surface. Among these methods, air-powder abrasive and oversaturated citrate are known to be most effective. However, these treatments may deform implant surface. In this research, changes of surface roughness they were examined. 10 experimental machined titanium cylinder models were fabricated to be used for control groups. Each of them was air powder abraded for 1 minute and they were named group 1. And then, group 1 were burnished with cotton pellets soaked with citrate for 30 seconds(Group 2), 1 minute(Group 3), 3 minutes(Group 4), and 5 minutes(Group 5) burnishing were applied for grouping respectively. Each group were examined with SPM, and their surface roughness were measured and analyzed. 1. Surface roughness of titanium decreased when it was air-powder abraded for 1 minute. It was statistically significant. 2. When Air-powder abraded titanium were treated with citrate for 3 minutes, Their surface roughness was the lowest. Titanium treated for 1 minute was the second lowest and 30 seconds was the third and titanium burnished for 5 minutes was the highest. 3. Surface roughness of titanium which was treated with citrate was decreased till 3 minutes, which was statistically significant. There was no statistical significance from 30 seconds to 1 minute and from 1 minute to 3 minutes, and there was statistical significance from 30 seconds to 3 minutes. 4. Oxide layer was formed when titanium is exposed to air, and it was removed when air-powder abraded. It was made when treated with citrate. It is thought that citrate treatment is necessary after the air-powder abrasion, and 1 minute is clinically and qualitatively adequate for burnishing time of citrate.

• Journal of Periodontal and Implant Science
• /
• 제31권2호
• /
• pp.451-463
• /
• 2001

Following the extensive use of implant, the incidence of peri-implantitis increases. Guided bone regeneration has been used for the optimal treatment of this disease. Because implant surface was contaminated with plaque and calculus, cleaning and detoxification were needed for the reosseointegration when guided bone regeneration was performed. Various mechanical and chemical methods have been used for cleaning and detoxification of implant surface, air-powder abrasive and oversaturated citrate were known to be most effective among these methods. However, these methods were incomplete because these could not thoroughly remove bacteria of implant surface, moreover deformed implant surface. Recent studies for detoxification of the implant surface using laser were going on, $CO_2$ laser and Soft Diode laser were known to be effective among these methods. The purpose of this study was to obtain clinical guide by application these laser to implant surface. 15 experimental machined pure titanium cylinder models were fabricated. The $CO_2$ laser treatment under dry, wet and hydrogen peroxide condition or the Soft Diode laser treatment under Toluidine blue O solution condition was performed on the each of models. Each groups were examined with SPM and SEM to know whether their surface was changed. The results were as follows : 1. Surface roughness and surface form weren't changed when $CO_2$ laser was usedunder dry condition(P>0.05). 2. Surface roughness and surface form weren't changed when $CO_2$ laser was used under wet condition(P>0.05). 3. Surface roughness and surface form weren't changed when $CO_2$ laser was used under hydrogen peroxide condition(P>0.05). 4. Surface roughness and surface form weren't changed when Soft Diode laser was used under toluidine blue O solution condition(P>0.05). From the result of this study, it may be concluded that the $CO_2$ laser having relatively safe pulse mode and the Soft Diode laser used with photosensitizer can be used safely to treat peri-implantitis.

• 대한치과보철학회지
• /
• 제48권4호
• /
• pp.308-314
• /
• 2010

연구 목적: 본 연구의 목적은 골 유착된 임플란트에 인위적 비틀림을 가하여 골 유착을 파괴시킨 뒤 시간 경과에 따른 골 재유착력의 변화와 임플란트와 골과의 계면에서의 골 반응을 조직형태학적으로 분석하는 것이다. 연구 재료 및 방법: 표면처리 하지 않은 실험용 임플란트 (cp titanium, ${\phi}3.75\;mm{\times}4\;mm$)를 제작하였다. 3.5 kg이상의 뉴질랜드산 흰색 암컷 토끼 12마리의 좌우 경골에 제작한 임플란트를 2 - 3개씩 식립한 후, 6주의 골유착 유도한 기간을 부여한 후 비틀림 제거력을 측정하여 1차 측정치로 기록한 다음, 골 재유착을 얻기 위하여 다시 침하시켰다. 시간 경과에 따른 골유착의 변화를 살펴보기 위해 각각 4일 (I군), 1주 (II군), 2주 (III군), 3주 (IV군), 4주 (V군), 및 5주 (VI군)의 치유기간 후에 2차 비틀림 제거력을 측정하였다. 형광 조사 하에서 골 재형성여부를 검사하기 위해서 각군의 토끼에게 테트라사이클린 15 mg/kg을 근육 주사하였다. 2차 비틀림 제거력을 측정한 후 토끼를 희생시키고 각 실험군당 2 - 3개씩 총 16개를 제작하였다. 광학 현미경을 이용하여 형광 조사 하에서 골재형성여부를 관찰하였다. 측정된 각 실험군의 1차 비틀림 제거력과 2차 비틀림 제거력의 증감율의 평균을 구하였다. 그리고 각 실험군에서 그리고 실험군간에서 2차 비틀림 제거력이 1차 비틀림 제거력에 대하여 유의한 변화가 있는지 알아보기 위하여 paired t-test, one-way ANOVA, 그리고 DUNCAN 다중비교법으로 통계처리하였다. 결과: 실험 I군과 II군에서는 2차 비틀림 제거력이 감소하였으며 특히 실험 I군은 유의성 있게 감소하였다. 실험 III, IV, V, 그리고 VI군에서는 2차 비틀림 제거력이 유의성있게 증가하였다. 실험군 간 차이 비교에서, 실험 I, II군과 실험 III, IV, V, VI군 사이에 유의성있는 차이를 보였다. 형광 조사 검사에서 1주째 시편부터는 임플란트와 골과의 계면 부위에서 형광띠로 나타나는 광물화가 시작되는 부분이 관찰되었으며, 2주째 시편 이후부터는 더욱 분명하게 골생성이 이루어짐을 볼 수 있었다. 결론: 임플란트에 의원성 동요가 발생된 후 힘을 가하지 않은 상태로 일정시간 유지하게 되면 임플란트와 골 사이 계면에 다시 골유착이 발생되며 토끼의 경골에서는 높은 골유착력을 2주 만에 얻을 수 있었다는 것을 알 수 있었다.